8020 Accessory Review: GT Omega Prime Floor Plate
ฝัง
- เผยแพร่เมื่อ 9 ก.ย. 2021
- Welcome to The Sim Channel for the review of the GT Omega Prime Floor Plate!
Don’t forget to hit like and subscribe!
~~~ GT Omega 5% Discount ~~~
Use code "THESIMCHANNEL" on checkout.
----------------------------
SUPPORT AND FOLLOW THE SIM CHANNEL
----------------------------
~~~ Sim-Lab Affiliate Link ~~~
simlab.prf.hn/l/rdObW0q
~~~ Fanatec Affiliate Link ~~~
www.fanatec.com?FAP+Banner&General+Links&a_aid=617f327f825e0
~~~ Trak Racer Affiliate Link ~~~
Enter coupon code "TheSimChannel" for a 5% discount at checkout!
www.trakracer.eu/?ref=55
~~~ GT Omega: Get a 5% Discount! ~~~
Use code "THESIMCHANNEL" on checkout.
~~~ ButtKicker (US & Canada only) ~~~
thebuttkicker.com?aff=48
~~~ Instagram ~~~
/ the_sim_channel
----------------------------
RELATED LINKS
----------------------------
GT Omega Prime review
• GT Omega Prime: Afford...
Sim-Lab P1-X review
• Sim Lab P1-X Sim Racin... - เกม
Hello mate, i tested it for the science, no way to flex my sim lab flor, i‘m 75kg.
They should make one for the Titan
Wait, so this is literally just a piece of Aluminium Checker Plate with 4 elongated holes?
I can get that all for free from where I work, so I'll just do that lmao
Wanted to ask you a question, I noticed that you have the same Indentations/markings on the top as it bends ...though you didn't mention it in the review .
It's the same makings which I have on mine, karl Gosling, and one of the reviews on the website , I presume it could be due to the bending process but was wondering what you thought about it
not sure what markings you are referring to?
@@TheSimChannel basically on the edges of the bends which are the front and back as you mount it onto the cockpit ( so on the actual bends and on top of the bends there looks like small dents on the tread .
While watching your video I could briefly see it, karl Gosling done a review of the floor plate and mentioned that on his one he has the dents ( he shows the dents/markings )
Was debating on this plate. 90$ is more than what I want to pay. With flex, it should be cheaper. I am gonna look at other options
Sounds fair!
What pedal tray are you using
Good to see you here! :) P1-X pedal tray with the pedal slider baseplate. You should watch my P1-X review ;-)
@@TheSimChannel I'm thinking about ordering this tray for my omega prime. Did it fit in the prime well or need a few washers/spacers? Doubt you'll see this but worth a shot. Its about 1/2 the cost of the prime so what to make sure. :) )
@@PickledGopher are you talking about the floor plate or the P1-X pedal mount? in general you just need to compare the width of the rigs to be sure. the P1-X has 50cm between the main beams of the chassis (i.e., inner width). just check with your prime and you're good to go. Oh and feel free to use my affiliate links if you order :)
Also quasi eine 1 zu 1 Kopie des Simlab Floors :D
Das simlab flor ist um einiges stabiler, es ist aus Gusseisen und erinnert, wegen des gewichts, an einer Weber Grillplatte.
@@Nicsos123 interesting, thanks for letting us know! :-)
I can’t compare the strength or weight but the SimLab version expressly says it is aluminum, not cast iron.
@@neilmouneimne5451 but it is 5 to 6mm aluminium ans ist strong enough
@@C42ST3N Simlab says 4mm but I haven't heard anybody complain about flex with the SimLab, so there is that. This Omega plate is thicker, but it is larger too, so either the flex is being caused by the wider unsupported length or Simlab is using a superior grade of aluminum.
Personally, I'm going to try what the author recommends - adding some 4040 profile for support and making it easier to remove for access.