M2 PERFORMANCE SERIES - FTP CHARGE PIPE, CSF FMIC & DINAN INTAKE

FTP Charge Pipe & Boost Pipe: tinyurl.com/vsdvgta
CSF FMIC: tinyurl.com/tz4m8cy
Dinan Intake: tinyurl.com/r2zanlp
MST Turbo inlet: tinyurl.com/utqk8rz
LINK TO MY F87 M2 BUILD SHEET: tinyurl.com/ycxj8djr
BMW MODIFICATIONS FROM ALL OF MY BUILDS: www.thicwhips.com
All of my Wheel & Tire Setups: tinyurl.com/yyftysns
--------------------------------------------------------------
Discounts and Codes: tinyurl.com/5n92k9m8
10% Off The Veepeak Adapter Using Code: YTBDST10 OBD2 Adapter For Bimmercode: geni.us/W4ct
20% Off Variant Wheels (Use Code “thicwhips”): tinyurl.com/8thphmmt
$13.99 Off The OBDLink CX+ Adapter For Bimmercode: tinyurl.com/yyj924lw
5% off all parks car care detailing products: tinyurl.com/yckma39s
5% off of Valvetronic Designs Exhausts Here: valvetronic.com/?ref=-2nSk-CZ...
ThicWhips Merch, Apparels, Decals: tinyurl.com/yvpwrra7
FACEBOOK GROUP: tinyurl.com/m4r294c
ALL MODIFICATIONS:
thicwhips.com/
--------------------------------------------------------------
**Some links may be affiliate links, meaning I earn a commission when you make a purchase. Thank you for the support!
--------------------------------------------------------------
F87 Mods & Parts:
M2 Seat Badges: tinyurl.com/y2jtsdqj
Dorch Stage 1 High Pressure Fuel Pump: tinyurl.com/y64pftj6
P3 Gauge: tinyurl.com/y5o6yb7q
Apex FL-5 Satin Black Wheels: tinyurl.com/pbfv7av6
F8X Carbon Seat Backs: tinyurl.com/y6pfddrd
R1 (Vstyle) Carbon Lip: tinyurl.com/mtbrrxva
H&R Front Lower Sway Bar: tinyurl.com/4e3244px
Phone Mount: geni.us/SUvJ19s
Snow Performance Meth Kit: tinyurl.com/y5pnfm8e
Cary Jordan N55 Tune: tinyurl.com/yd2978l4
Paul Johnson N55 Tune: tinyurl.com/y5kkl9lg
High Kick Carbon Spoiler: tinyurl.com/y9ouoevs
M Performance Race Display Steering wheel: tinyurl.com/y7gmywb7
GTS Wing: tinyurl.com/yccdhn87
Carbon Fiber Sideskirt Extensions: tinyurl.com/bdfvmvms
Bayoptiks Headlights: bayoptiks.com/discount/THIC
Goodridge Steel Braided Brake Lines: tinyurl.com/ybclwlwv
EBC Red Ceramic Brake Pads: tinyurl.com/y873m4lv
Windshield Wiper Blades: geni.us/0BQ8
BMW Floating Center Caps: geni.us/tCDmp
Bootmod3 Bundle: tinyurl.com/vogpuvy
H&R Wheel Spacers: tinyurl.com/ucfo6x7
FTP Charge Pipe & Boost Pipe: tinyurl.com/vsdvgta
CSF FMIC: tinyurl.com/af6yap5c
Dinan Intake: tinyurl.com/r2zanlp
MST Turbo inlet: tinyurl.com/3f3nu4wy
Renn 10mm Spacers all around: geni.us/kxM9q
GTS Hood - tinyurl.com/4n4czvdj
Dinan Exhaust: tinyurl.com/u6vu3dt
M2 Diverter Valve: tinyurl.com/y7exlg7s
M performance Shift KnobW/ Alcantara Boot: tinyurl.com/y8qxyora
KW H.A.S. Kit: tinyurl.com/444esn5m
M2 GTS Carbon Front Lip: tinyurl.com/r9es9sr
M2 Carbon Diffuser: tinyurl.com/ujdt9ph
Wheel Stud Conversion Kit: tinyurl.com/y7zx8xfg
PSM Style Carbon Spoiler: tinyurl.com/cr3m86ye
M Performance Style Carbon Spoiler: tinyurl.com/yaa6kay4
CS Style Carbon Spoiler: tinyurl.com/ycvrq3z8
6000K Xenon D1S Bulbs: geni.us/E7dA3h
Black M2 Side Grilles: tinyurl.com/ycnr54pw
Blue Start/Stop Button: geni.us/srdD6X
Gloss Black Kidney Grills: geni.us/jnKIZtz
Black M2 Badge: tinyurl.com/y57u8sec
Carbon Fiber Mirror Caps: tinyurl.com/y34t5qgt
Carbon Shark Fin: geni.us/1J38Q
Carbon Fiber Door Latch Cover: geni.us/2H22H
Paint Matched Reflectors: www.americanpandadesign.com/
LED Sidemarkers:geni.us/n0lq
LED Reverse Bulbs: geni.us/YWSqOaa
Smoked Sequential Mirror Blinkers: geni.us/85L3H9u
Kies Motorsports Key Cover: tinyurl.com/wbdpwnm
Aluminum Pedal Covers: geni.us/IPAUA
Custom Coding: tinyurl.com/mfj9t7sa
Shadowline BMW Roundels: www.americanpandadesign.com/
---------------------------------------------------------
My Filming Gear:
Canon Eos M6: geni.us/DSaK
(Vlog Lens) Canon 11-22mm Lens: geni.us/Vbh4
(Shoot Lens) 50mm Canon Lens: geni.us/jTTQc
Rode Video Micro Microphone: geni.us/BzE5Ld
Joby Gorillapod: geni.us/tfrwId
Macbook Pro M1: geni.us/MLmoD0
Mavic Mini Drone: geni.us/4Ypz8
GoPro 8 Hero Black: geni.us/ynB5
Gopro Headrest Mount: geni.us/OyBe1y
Gopro Flex Mount: geni.us/3VcU6oO
Camera Window Suction Mount: geni.us/bJccNG
Camera Backpack: geni.us/uBsM
----------------------------------------------------------
Garage & Tools:
Garage LED Lights: geni.us/ZOSr
Veepeak OBD2 Diagnostic Tool: geni.us/8h3Xcf
Blackvue Dashcam (10% off using ThicF30 Code): tinyurl.com/42xfnrtc

[@ThicWhips]

LINK TO MY F87 M2 BUILD SHEET: tinyurl.com/ycxj8djr
BMW MODIFICATIONS FROM ALL OF MY BUILDS: www.thicwhips.com
All of my Wheel & Tire Setups: tinyurl.com/yyftysns

[@parth516]

dude props to you man I'm so scared to work on my car because i feel like I'm gonna break something but this gave me confidence😂

[@dylan-nguyen]

Primitive this was me as well. But I learned, just do everything slow and allow 2x the time you thought. That way you can take a break when frustrated.

[@NicholasMSmiff]

Love the intro man. The car sounds so freaking good

[@codymachado]

I just installed my charge pipe yesterday. Well last night til 3 am lol. Wasn’t too bad honestly, did it on my own too. Taking your time with it is important. Lots of hoses and line you can potential damage

[@abc.garage]

Sounds really nice wow

[@GKM5]

Loooove the diy stuff brother, great job

[@yellowdart165]

Dinan intake looking clean! Does that rubber piece you put on where you cut the brace come with the intake?

[@conradwilkerson8765]

Add the Dinan Resonator Delete Mid Pipe to your set up! It gives the N55 engine a much meatier/throaty sound, and greatly improves the sound quality of the burbles/overrun, especially with the added burbles from the Bootmod3 tune. I’m running the same set-up. Still retain a refined OEM plus sound with zero drone.

[@NVMotorsportUK]

Good work!

[@e46rush]

was so hype for this lets gooo

[@rudbonnici8135]

just installed my charge pipe, FMIC and intake on my M2. It already feels way better. BM3 stage 2 next.

[@kylesm235i4]

Would've be nice to have a fully stock dyno first to compare bolt ons, then tunes. Hope he does ethanol blend tune as well

[@Trash_Panda_Manifesto]

Thank you for your video. I just purchased a Dinan build M2. It has this same air intake but it is not CA compliant. I watched the video to get an idea of whether or not it would be difficult to go from the Dinan intake back to stock. Can you think of anything that might cause problems for me going backwards and undoing all of this? I notice you mentioned there was clips you removed and foam striping you added? I am wondering if I will have fitment issues if I go back to stock? Any help you can provide is appreciated. Thank you!

[@hunchoG20]

Your videos have evolved freakin awesome man!! 👍🏽 love the drone and cinematic footage 🔥🔥

[@frankwang7491]

Thanks for Great video, i have a question, how did you get rid of the bottom plastic trim that should be in the way of pushing the bigger intercooler upward, im planing to install the same intercooler but i see other videos showing that that plastic trim at bottom stops the way, and they had to take the bumper off. But i dont see that in ur video.

[@f30giova]

Best intro

[@bboydradle]

Try connecting the charge pipe to the intercooler before connecting it to the turbo outlet. On the OEM intercooler it’s nearly impossible otherwise.

[@R1d3rBul]

Thanks for the video. Why not vrsf charge pipe?

[@trackntrail2869]

Did you ever resolve the issue of the FTP charge pipe hitting the bottom of the AC condenser? I'm running into the same issue now with the CSF IC and FTP CP

[@FuzzFPV]

Was that N and 2 in the rear vision mirror? What is that?

[@andysmith4303]

Did you leave the plastic piece that sits below the stock intercooler out completely? I cannot seem to get my intercooler up in there without hitting the front brace.

[@omaralkhatib9140]

Hello brother, hope all is well! Do you have any idea if the charge pipes, intakes, and turbo inlets require a tune or not. Not for hp gains but for the relatability of the car. Meaning will it run normally without throwing any lights on the dashboard or will it run too lean? Because I want the intake for the sound and the charge pipes and the turbo inlet are just safety since as said the stock ones do get broken easily. Your help would be much appreciated. Thank you!

[@alen7032]

Long video yess

[@joshallen6558]

You going catless downpipe too?

[@timg7885]

Wow. How do you know how to do all these mods? Big ups to you!

[@timg7885]

SpaceMonkey it’s not that easy! Try installing a turbo inlet in a N20! All my other mods have been installed at the shop!

[@esadkorkutovic3372]

It’s easier to yank the charge pipe from the top

[@kylesm235i4]

Should my M235i have that metal pan underneath or is that just M2? And why didnt you feed the new chargepipe up from the bottom like you removed it lol.

[@codymachado]

Kyle's M235i the way it curves makes it pretty hard to do especially if you don’t drop the intercooler

[@kylesm235i4]

@@codymachado you saw how easily the old pipe came out the bottom. Same concept going in. I have done all of these mods myself

[@kylesm235i4]

Cutting anything off the strut brace is crazy to me, Burger Motorsports intake is much better IMO for audible noises from turbo/diverter valve and Burger intercooler was direct replacement. These more expensive companies not being so it ridiculous

[@codymachado]

Kyle's M235i I agree the bms intake sounds epic, but it made my car idle terribly on start up. I’d take it off and it would be fine. But I left it on for 7 kk this and eventually got so bad it actually damaged my coilpacks and or plugs as I now experience the same symptoms without the intake even on my car. If there’s one intake I don’t recommenced it’s the burger Intake. The intake from CTS turbo is miles better in terms of performance and sound.

[@kylesm235i4]

@@codymachado I've had mine on for 7k miles and no issues. Are you tuned and if so by who?

[@Thakorrupt1]

🙌🏽🙌🏽🙌🏽

[@JuanReyes-qr9kp]

BMW POWER 🚘🚘🚘😎

[@F80Ho]

Your boy is getting old 😂