That’s fabulous. Great job guys. Appears super quick, Uncomplicated and easy to tune. Thanks very much. Will you all be able to post a “tuning chart” by your tech department of the most efficient settings for various pellets and slugs? I am way psyched.
Sir very informative thanks, one question I have is I'm new to the fx impact and am shooting 25 gr jsb, where do I start adjusting, i want to shoot 34 gr pellets and the same gr slugs?
Hi there, can you help me out please, I’ve got a M3 30cal and i’ve just received a new barrel kit in 3.5 shooting 81gr JSBs pellets, what do you suggest I set my reg , I’ll be zeroing at 50 yards maybe 70. Looking forward to your reply
Hi I have a M3 .22 fac version , if I was to put a .30 cal 700mm barrel on it would I need to change the hammer weight to a larger 1 to get speed to 900+
Unit yang di idam idamkan para pemburu senapan angin di indonesia, ingin sekali aku memilikinya tapi sayang aku tak punya uang untuk membelinya, hanya sebatas menonton dan bermimpi semoga dari Fx airguns yang terhormat dan baik hati iklhas memberikan aku secara cuma cuma.. aamiin..
Thanks a lot for all your tutorials! I have a question: I jus got a Impact M3 Snipper .30 cal with the barrel tension kit. Wicht pellets do you recommend: 44 of 50 grain...? Kind regards from Th Netherlands, J.C.
Thnx for the great video. Just bought a M3 .30 cal 700mm. Is it safe to increase the reg pressure while the systems is pressured. And is Ernst Row turning clockwise to increase it? Thnx.
Hi I have 2 questions I have a M3 .35 and would like to know the Correct air and starter settings and that side gauge you have on this gun if i buy one where does it screw into? Mine has 3 set screws where yours is mounted the middle one being smaller. Thanks
Hi Ernest, for my m3 cal.25 I have a pro macro pin 16 micro 3 valve at 4.5 and a second regulator at 110, is this okay? I tested it at 95 but I see little difference in accuracy
@FXAirguns @Ernest Rowe Great vid very quick tune! After finding min and max power at rear reg by adjusting hammer spring the airgun should be balanced between regulator pressure and hammer spring tension correct? After this you check your valve preload. Now my big question, if you make another adjustment to your power wheel or micro adjuster do you need to readjust the valve spring tension? Thank you for all you’ve done for the Airgun community Sir. Great resource for information and great products.
Hi....I just bought MK3 just now, and I need your sugestion to tune my MK3 (macro, micro wheel, regulator pressure 1 & 2, etc) for pellet NSA 15 gr....thanks for your sugestion.
Xin chào chú. Cháu đến từ Việt Nam. Cháu đàn sử dụng FX m3 này cỡ nòng 600mm 5.5 sử dụng đạn 27gr. Chú có thể cho cháu thông tin cài đặt phù hợp cho cấu hình đó không? Cháu đã tìm hiểu trong nước gần cả năm nay nhưng chưa tìm ra được đám án. Mong chú giúp ạ. Cám ơn
Parabéns pelo trabalho é um armeiro engenheiro está você só merece elogios ficou feliz por você conquistar milhões é ó reconhecimento de todos like garantido sempre
@@chipsammich2078 Hello Chip, I have picked up snippets of info from some users (of the M3 and M2) but have yet to see it covered by any of FXs people. I feel they are missing a trick. good luck.
@@chipsammich2078 Not much to share, RussDouglas222 (YT) check out his latest video (and the comments) he will be doing a full magazine review, with settings. some other "snippets" that escape me right now, to be honest, it is all stuff we already know, power wheel down to one, Reg down, valve turned. But, no were have I seen a claim of sub20 ftlbf tune (in an fac gun) If/when I remember/get anything else I will pass it on to you.
@@henrymoreland8719 I alway been interested in low-power tunes for FX Impact in all the calibers. Currently I own Mk2 .30 and waiting ofr the stock to arrive for M3 .22 I managed to tune mine Mk2 .30 for JSB 44.75gr pellet on power level 1 around 664 fps on average. Accuracy is not perfect, comaring to normal power mode, but not bad at all, at 45 meters 5 shots group will be almost all touching, if i do my part and no wind.
Thanks for this perfect instruction. I am quite not shure what is the best value for my FX impact M3 (Standard), caliber .25 (also with Power Plenum, same as you have)? Can you say me what for settings i should start for test? Reg1, Reg2, Valve, hammer spring and Micro Weel. The Accuracy isnt good in moment. When i check the speed from diabolo, i get arround 750fps, but it should be much more for efficient accuracy (tell me the Manufacturer). Thank you for help me with the settings. My pellets/Diabolo are JSB Exact Heavy 33,95gr and JSB Exact King 25,39gr. Regards from Switzerland ;-) Pascal
Hi, I was wondering if you can help me. I have FX M3 impact. It’s the British one below 12 pound I invested in a V2 chronograph 813 fps can you please tell me if that’s good or bad as I don’t know what I’m doing i’ve only just purchased it thanks
I recently purchased FX M3 .177 cal 600 mm barrel power block.I want to install .25 cal (600mm) shooting pellets.Please tell me what will be my settings
Good evening Mr. Ernest Rowe Nielsen, I purchased these Specialty Ammo Airgun Slugs - .30 Caliber (.300), 54.5 Grain, 175 Count, I understand they are a little heavy, however I am not going to through them away. Would you please help me set these pellets with my new FX Impact M3 30 Cal? I don't know how fast they should be not much else. I just bought it May 5, 2022. Thank you, I hope you can help me.
Is the FX Impact M3 meant to blow air out the back just behind the mag from the vertical vents located behind the power plenom?? Minne does that and its quite annoying. I never however see you flinch or react from the blow back. Is this normal??
I'm buying second hand mk1 impact with a huma reg on it. I haven't installed anything else. What's the maximum energy I can expect out of a .22 cal gun? I intend to shoot slugs with it.
Wanting to shoot both 30 & maybe 35 cal slugs long range in the USA. Mainly for crow and groundhog hunting. Do you recommend getting the 35 cal with carbon sleeve, barrel tunner and digital gauge? Then buy the 30 cal kit? What is the best way to contact you before placing my order? Thank-you in advance for your help.
Hi, Earnest i have questions ? i just bought new impact M3 ..ok why the adjuster valve not moving ( up or down ) to increase the power.. with my regards to you..
I have a M3 22 cal . I have a 700cc bottle =300 bar . First reg is at 190 second 150. I have 700mm barrel , NSA pin probe . I plan on shooting between 40-28 grain slugs . How fast should I be getting out of the 34-36 grain slugs ? I’ve seen 1007 but I think it should be faster .
Hey Ernest, Phil here I've been watching, and researching. I'm going to have you all set up aFX m3 30cal, 800mm barrel...aftermarket 300bar,30cal slugs only. For Coyotes and Hogs. Will you be available to set up zero at 75yds? For me...Will call, maybe drive out from Oklahoma to set up,,,need help and evice
Hello Ernest, could you tell me what the. 22M3 sniper barrel twist rate is please, also my M3 reg 1 came from factory at about 170bar, 2nd is around 85bar.
Fun to watch you tuning, great learning place. For .22 CAL impact M3 with 600mm standard barrel, shooting .217 dia. slug in 25.4 grin, what would be the starting point for fine tuning : FPS:? 1st reg. bars?: 2nd reg. bars?: front valve number of lines: Macro : micro:
Hello Ernest, nice to greet you, spectacular video, very important information. Thanks. I would like to ask you a question: I already bought an M3 and it is on the way. It's the Sniper version, 700mm barrel, 580cc bottle, .25 caliber ... I intend to use Nick Nielsen slugs, 33.5 grains. Could you tell me the ideal configuration for this rifle with these characteristics. Very thankful.
Hy, Is it possible to set the 720 power plenum on MK 2 to get more energy ? As a reference, FX airguns indicates that MK 2 in 5.5mm is given for 41 joules and M3 is 107 joules
I have a M3 25 cal. When tuning, the highest MV is ~780ft/sec with 1st reg 170, 2nd reg 155, 16/3.5, valve 5.5. You note the 25 cal 2nd reg should be 90 and you get1000+ ft/sec.....how? When I use your settings, I can get only sub-800 ft/sec MV of a 33.5 gr slug. What am I doing wrong?
Hello good afternoon from the Dominican Republic, l have a 30 caliber fx impact mkll. I have a problem thowibg air into a small hole on the rigth,insulares Please sir.!!!
Good morning . I would need help to calibrate my fx m3 air rifles in cal. 30 I am using these sinkers (H&N GRIZZLY PIOMBINI CAL, 9 MM - WEIGHT; 8.2 GRAMS - 85 PCS). I looked for the network and since this is a new model and caliber there are still no parameters that must be used for the best performance weight, power and calibration of the air settings of the rifle. I saw that in the cal. 25 the speed was calibrated about 960! Does my ball also have to be put at that speed? Is that the speed at which you get the best performance? Since you are the best in this field if you could help me I would be very grateful! I am waiting for your reply. Thank you in advance for your courtesy and professionalism. Sincerely Roberto Alessi Thank you
It’s only sage if you want to go up with the pressure of the regulator. If you want to go down you will need to depressurize the air inside to avoid damage on the regulator.
U e requested to pls make a video on how to increase fps in rhe fx impact mk2 with the slug power kit for 40 grains n 44 grains slugs ...I m getting only 910 fps ...rig pressure is at 140bar ...
This is my question too. As far as I know, we have to always max the hammer spring for a desirable speed and then reduce it 3-5% using the valve adjuster. I didn’t find any info on the M3 bell curve yet. Would be nice to have it clarified.
Hello, I regularly watch your videos. They are super. But I would like to ask a question. I have a M3 sniper in .22 and .30 When I set the macro to 16 with micro to 3.5 I get the same result with the hammer on 1 and micro on 5. The pellets come out at the same speed. Is this normal?
You may need to call our technician department, your regulator could be low, or your valve adjuster is not tuned correctly we would need some more information. Regards, FX Airguns USA
![[Gegagedigedagedago] NEW Help Gegagedigedagedago Nugget escape from Nikocado Avocado Challenge](http://i.ytimg.com/vi/hJWnwRC2Fz8/mqdefault.jpg)
That’s fabulous. Great job guys. Appears super quick, Uncomplicated and easy to tune. Thanks very much.
Will you all be able to post a “tuning chart” by your tech department of the most efficient settings for various pellets and slugs? I am way psyched.
Thank you for your help and all you do for the air gun community
Amazing quick set-up in M3 air gun, not cosmetic and unimportant changes. Thanķs for share Mr. from Chile!
Thanks for an informational video. I’m very happy with my M3.
Thank you. My new Impact is on order and this will save a lot of trial and error when it arrives.
Awesome demonstration once again. Can't wait to get mine; back order.
I got lucky I went down and got one today
@@MrHons77
Where did you walk in and buy a M3 off the shelf..?
@@MrBad4fun in rose city michigan just got lucky I didn't even know there was a m3
Will there be a basic cheat sheet for different pellets and slugs
yes it will be great to have a sheet for different pellet
Working on getting this info on our website as we continue to test and tune with the new M3
@@FXAirguns really hsppy to hear that!
That would be great if we can get the info on all tuning cals in a chart form
@@FXAirguns it will be the best thing you can do for all airgunners
As always great info. Can you do a video on how to adjust the first regulator please
Sir very informative thanks, one question I have is I'm new to the fx impact and am shooting 25 gr jsb, where do I start adjusting, i want to shoot 34 gr pellets and the same gr slugs?
I just did the 25g pellet to 34g pellet on my 600mm .25 cal
Macro 16
Micro 5.0, was at 2.5
Rear regulator 120, was at 100
Side regulator 140
902 fps
I like the stash and goatee! Lookin' like Grand Master FX ;-)
One word.....SICK.
What’s the ideal settings for a .357 M3. My goal is to shoot both 82gr JSB and 82gr slugs at 900-910 FPS. Thank you
Hi there, can you help me out please, I’ve got a M3 30cal and i’ve just received a new barrel kit in 3.5 shooting 81gr JSBs pellets, what do you suggest I set my reg , I’ll be zeroing at 50 yards maybe 70. Looking forward to your reply
Hi
I have a M3 .22 fac version , if I was to put a .30 cal 700mm barrel on it would I need to change the hammer weight to a larger 1 to get speed to 900+
Unit yang di idam idamkan para pemburu senapan angin di indonesia, ingin sekali aku memilikinya tapi sayang aku tak punya uang untuk membelinya, hanya sebatas menonton dan bermimpi semoga dari Fx airguns yang terhormat dan baik hati iklhas memberikan aku secara cuma cuma.. aamiin..
Thanks a lot for all your tutorials!
I have a question: I jus got a Impact M3 Snipper .30 cal with the barrel tension kit. Wicht pellets do you recommend: 44 of 50 grain...?
Kind regards from Th Netherlands,
J.C.
Thnx for the great video. Just bought a M3 .30 cal 700mm. Is it safe to increase the reg pressure while the systems is pressured. And is Ernst Row turning clockwise to increase it? Thnx.
do you plan to have a full pdf list with gun set up for each common pellets and slugs?
Hi I have 2 questions I have a M3 .35 and would like to know the Correct air and starter settings and that side gauge you have on this gun if i buy one where does it screw into? Mine has 3 set screws where yours is mounted the middle one being smaller. Thanks
Hi Ernest, for my m3 cal.25 I have a pro macro pin 16 micro 3 valve at 4.5 and a second regulator at 110, is this okay? I tested it at 95 but I see little difference in accuracy
What I am interested in, is how to sight in the M3 with a scope. Bore sighting seems to be impossible. How do you handle that? Thank you.
@FXAirguns @Ernest Rowe
Great vid very quick tune! After finding min and max power at rear reg by adjusting hammer spring the airgun should be balanced between regulator pressure and hammer spring tension correct? After this you check your valve preload. Now my big question, if you make another adjustment to your power wheel or micro adjuster do you need to readjust the valve spring tension? Thank you for all you’ve done for the Airgun community Sir. Great resource for information and great products.
Excellent video as always bud. Where can we get the digital gauge in the UK please :)
Ajusting the reg pressure do you turn it clockwise or anti clockwise?? Thank you
Hi....I just bought MK3 just now, and I need your sugestion to tune my MK3 (macro, micro wheel, regulator pressure 1 & 2, etc) for pellet NSA 15 gr....thanks for your sugestion.
Xin chào chú. Cháu đến từ Việt Nam. Cháu đàn sử dụng FX m3 này cỡ nòng 600mm 5.5 sử dụng đạn 27gr. Chú có thể cho cháu thông tin cài đặt phù hợp cho cấu hình đó không?
Cháu đã tìm hiểu trong nước gần cả năm nay nhưng chưa tìm ra được đám án. Mong chú giúp ạ. Cám ơn
Parabéns pelo trabalho é um armeiro engenheiro está você só merece elogios ficou feliz por você conquistar milhões é ó reconhecimento de todos like garantido sempre
Great information, any idea for MK3 .177 600mm and NSA 15gr? Thank you
Please show how/settings for indoor (barn/plinking )low power (sub 20ftlbf) shooting, thank you.
Have you found anymore info on this?
@@chipsammich2078 Hello Chip, I have picked up snippets of info from some users (of the M3 and M2) but have yet to see it covered by any of FXs people.
I feel they are missing a trick.
good luck.
@@henrymoreland8719 care to share?
@@chipsammich2078 Not much to share, RussDouglas222 (YT) check out his latest video (and the comments) he will be doing a full magazine review, with settings.
some other "snippets" that escape me right now, to be honest, it is all stuff we already know, power wheel down to one, Reg down, valve turned.
But, no were have I seen a claim of sub20 ftlbf tune (in an fac gun)
If/when I remember/get anything else I will pass it on to you.
@@henrymoreland8719 I alway been interested in low-power tunes for FX Impact in all the calibers.
Currently I own Mk2 .30 and waiting ofr the stock to arrive for M3 .22
I managed to tune mine Mk2 .30 for JSB 44.75gr pellet on power level 1 around 664 fps on average.
Accuracy is not perfect, comaring to normal power mode, but not bad at all, at 45 meters 5 shots group will be almost all touching, if i do my part and no wind.
Can you share the purchase link of shooting Rest？
Thanks for this perfect instruction. I am quite not shure what is the best value for my FX impact M3 (Standard), caliber .25 (also with Power Plenum, same as you have)? Can you say me what for settings i should start for test? Reg1, Reg2, Valve, hammer spring and Micro Weel. The Accuracy isnt good in moment. When i check the speed from diabolo, i get arround 750fps, but it should be much more for efficient accuracy (tell me the Manufacturer). Thank you for help me with the settings.
My pellets/Diabolo are JSB Exact Heavy 33,95gr and JSB Exact King 25,39gr.
Regards from Switzerland ;-) Pascal
Do you have settings for the 35 800mm m3? JSB 81gr , also does this barrel flip over with slug port and as always thanks for the help and information
Hi, I was wondering if you can help me. I have FX M3 impact. It’s the British one below 12 pound I invested in a V2 chronograph 813 fps can you please tell me if that’s good or bad as I don’t know what I’m doing i’ve only just purchased it thanks
if you have any video shows how turns the valve up or down to increase the shooting power
question
I recently purchased FX M3 .177 cal 600 mm barrel power block.I want to install .25 cal (600mm) shooting pellets.Please tell me what will be my settings
What is the best tuning for 22 cal 700mm barrel, shooting 18.13 gr jsb
Dose it worse changing mk2 to mk 3 ??? Especially that i have just got my compact mk2 i haven't tuned it yet 😥😥
Good evening Mr. Ernest Rowe Nielsen, I purchased these Specialty Ammo Airgun Slugs - .30 Caliber (.300), 54.5 Grain, 175 Count, I understand they are a little heavy, however I am not going to through them away. Would you please help me set these pellets with my new FX Impact M3 30 Cal? I don't know how fast they should be not much else. I just bought it May 5, 2022. Thank you, I hope you can help me.
I have fx impact m3 .177 cal could you please tell me how to tune my gun to gain maximum power
Is the FX Impact M3 meant to blow air out the back just behind the mag from the vertical vents located behind the power plenom?? Minne does that and its quite annoying. I never however see you flinch or react from the blow back. Is this normal??
Dear Ernst, could you tell us what is the best adjustment for the M3 Sniper using the JSB 25,39gr. thx in advance
I'm buying second hand mk1 impact with a huma reg on it. I haven't installed anything else. What's the maximum energy I can expect out of a .22 cal gun? I intend to shoot slugs with it.
Wanting to shoot both 30 & maybe 35 cal slugs long range in the USA. Mainly for crow and groundhog hunting.
Do you recommend getting the 35 cal with carbon sleeve, barrel tunner and digital gauge? Then buy the 30 cal kit?
What is the best way to contact you before placing my order?
Thank-you in advance for your help.
I want to ask, how about left hend shooter..because the magazin position it is disturbed?
What if we want to tune for slugs in a 22 using the FX hybrids what pressure should I run and what setting for valve adjuster adjuster
May i ask you for factory settings of M3 for .25?
Hi, Earnest i have questions ? i just bought new impact M3 ..ok why the adjuster valve not moving ( up or down ) to increase the power.. with my regards to you..
Is the screw tight
Earnest, do you need to change the spring, hammer and c-1 when going 35 cal down to .22? If so what are the part #'s
wow very good i am amazed by FX impact M3 Can I have it? I really want this excellent weapon
Great quick lesson.
Would you be so kind as to do one maverick. 22. Higher grn then 18 Thank you
My m3 reg-1 can not be adjusted above 140 bar. Is it the gauge defect ?
I have a M3 22 cal . I have a 700cc bottle =300 bar . First reg is at 190 second 150. I have 700mm barrel , NSA pin probe . I plan on shooting between 40-28 grain slugs . How fast should I be getting out of the 34-36 grain slugs ? I’ve seen 1007 but I think it should be faster .
i want you to show, disassembly of impact m3. Thank you
Will be a full break-down and reassembly of the M3 in the future
Hey Ernest, Phil here I've been watching, and researching. I'm going to have you all set up aFX m3 30cal, 800mm barrel...aftermarket 300bar,30cal slugs only. For Coyotes and Hogs. Will you be available to set up zero at 75yds? For me...Will call, maybe drive out from Oklahoma to set up,,,need help and evice
Will there be a slug power kit and a slug liner in 357cal
With settings lower than 100 bar on the second stage the main valve does not always closes... anyone else experiences this? Is there a fix..?
Ernest what is a good tool for 25 cal 34 grain please !
What shooting rest is that? It’s a lot better then the one I have, thanks - dang it! now I want a M3!!
Hello Ernest, could you tell me what the. 22M3 sniper barrel twist rate is please, also my M3 reg 1 came from factory at about 170bar, 2nd is around 85bar.
What was the reg pressure on 2nd reg?, looks so easy to tune👍
Fun to watch you tuning, great learning place.
For .22 CAL impact M3 with 600mm standard barrel, shooting .217 dia. slug in 25.4 grin, what would be the starting
point for fine tuning :
FPS:?
1st reg. bars?:
2nd reg. bars?:
front valve number of lines:
Macro :
micro:
So much for getting back to you. I just got the same gun how have you got on with your settings?
I run mine first reg 170 second 135 macro wheel 13 micro barely over 4 regulator valve 4.5.. Around 945-955 fps been pretty happy with it so far
1 reg.. 160 bar
2nd reg 120 bar
Front val. 4
Macro 16
Micro 5
FpS.. 1016
25.39.grain. KNOCKOUT
I saw your post on Trigger adjustment in the MK2 and was wondering how much it has changed on the MK3?
th-cam.com/video/ExDFm9Hqur0/w-d-xo.html
which setting of m3 177 cal 600mm barral with jsb 13
43 grain... 980 fps how to tune? please help me
Hello Ernest, nice to greet you, spectacular video, very important information. Thanks. I would like to ask you a question: I already bought an M3 and it is on the way. It's the Sniper version, 700mm barrel, 580cc bottle, .25 caliber ... I intend to use Nick Nielsen slugs, 33.5 grains. Could you tell me the ideal configuration for this rifle with these characteristics. Very thankful.
What mm is umbrako you are using?
Hy, Is it possible to set the 720 power plenum on MK 2 to get more energy ? As a reference, FX airguns indicates that MK 2 in 5.5mm is given for 41 joules and M3 is 107 joules
Yes possible
Can the tank be charged by an air compressor?
Yes, see around minute 10 m.th-cam.com/video/8A-w1lSJ9Is/w-d-xo.html
@@alestbest Nice. Thanks !
great video buddy
where can i get information on .177 on 15 grain nielsen slug most efficient setting?
hi all, my MACRO wheel is very very hard to turn, i just received gun today. any advice would be great
110 bars is too high,it is equal to 1595 psi, is it correct?
I have a M3 25 cal. When tuning, the highest MV is ~780ft/sec with 1st reg 170, 2nd reg 155, 16/3.5, valve 5.5. You note the 25 cal 2nd reg should be 90 and you get1000+ ft/sec.....how? When I use your settings, I can get only sub-800 ft/sec MV of a 33.5 gr slug. What am I doing wrong?
How much priece mr..?
My 2nd reg is 5-10 bar off every time i get it out?
Hello good afternoon from the Dominican Republic, l have a 30 caliber fx impact mkll.
I have a problem thowibg air into a small hole on the rigth,insulares
Please sir.!!!
Nice review
What about the settings for .177 jsb beast? Or 15 grain Nielsen slug?
Good morning . I would need help to calibrate my fx m3 air rifles in cal. 30 I am using these sinkers (H&N GRIZZLY PIOMBINI CAL, 9 MM - WEIGHT; 8.2 GRAMS - 85 PCS). I looked for the network and since this is a new model and caliber there are still no parameters that must be used for the best performance weight, power and calibration of the air settings of the rifle. I saw that in the cal. 25 the speed was calibrated about 960! Does my ball also have to be put at that speed? Is that the speed at which you get the best performance? Since you are the best in this field if you could help me I would be very grateful! I am waiting for your reply. Thank you in advance for your courtesy and professionalism. Sincerely Roberto Alessi Thank you
Where can I get the 700mm .30 barrel kit with the dual transfer port? Thanks!
Did you have any luck?
@@chipsammich2078 Huma Air sells the kit. Huma-air.com
@@raymundogvargas thanks
I would like to see tunes with the slug power kit installed. Let's see what a 72cc plenum can do!Thanks !
That video will be coming soon with a refresher for everyone on how to install the Slug Power Kit
What r best settings for 22 600mm barrel if factory reg is set at 75 where should other reg be
Where should we fill the gastank what types ok gass is nidded
What chronograph is that? Thanks
Ernest. Is it safe to turn the regulator screw without depressurizing the m3 cylinder?
It’s only sage if you want to go up with the pressure of the regulator. If you want to go down you will need to depressurize the air inside to avoid damage on the regulator.
@@jeromemorespeeder3503 ok
Hi I have a Impact M3 .35 with a 800mm barrel and want to know if anyone has the air pre settings for the new FX .35 Slug?
Thanks
What brand is your gun vise?
U e requested to pls make a video on how to increase fps in rhe fx impact mk2 with the slug power kit for 40 grains n 44 grains slugs ...I m getting only 910 fps ...rig pressure is at 140bar ...
Plizz, make a video of fx m3 .77 to used 13.43 jsb pellets..
Is the valve adjustment knob for fine tuning on paper like MK2?
Hi Ernest, you mentioned that this was the most common setting for the 30 cal. Do you know the values for the 25 cal too? Much appreciated!
500, 600, 700mm?
@@FXAirguns 600
How do you know where the tune is sitting on the bell curve without first determining max fps for a given reg pressure?
This is my question too. As far as I know, we have to always max the hammer spring for a desirable speed and then reduce it 3-5% using the valve adjuster. I didn’t find any info on the M3 bell curve yet. Would be nice to have it clarified.
A better video is probably th-cam.com/video/c3VqFPWJ1F8/w-d-xo.html
Can you tell me reg sets and tune for
Fx hybrid slugs .25
How far the range
Great vid just wondered Can you put the 72cc plenum on the mk 2
Yes, the 72cc plenum can be added to older Impacts
settings for .22 sniper shooting/ NSA 31.2 slugs (something we can find to buy). Looking to shoot 200 yards. Thanks so much
Can I put the m3 power wheelt on my Impact MK2?
Top
Hello, I regularly watch your videos. They are super. But I would like to ask a question. I have a M3 sniper in .22 and .30 When I set the macro to 16 with micro to 3.5 I get the same result with the hammer on 1 and micro on 5. The pellets
come out at the same speed. Is this normal?
You may need to call our technician department, your regulator could be low, or your valve adjuster is not tuned correctly we would need some more information. Regards, FX Airguns USA
Ano po ang tuning ng fx impact compact m3 .22 cal 18.13 gr. Jsb