When doing heavy haulage, it's always great to have brilliant escorts. Have now seen quite a few of your videos, and Alain is really on top of it all and keeps you safe
Amazing video! I can’t believe I watch parts 1&2 - great editing! I am impressed with how you all work together so amazingly. Keep up the great content.
A driver can’t get to this level of transport if he/she isn’t a team player. You need to know how to lead a team and use all the players. The “I don’t need any help” attitude doesn’t get you far here
Very great and educational video: really shows how complex heavy haul can be. It CERTAINLY takes a TEAM to pull it off successfully, cuz there’s TOO MUCH that could go wrong. Kudos to you guys!!!!
The USA is still using the home movers guide that was used back in the 50's to route trucks, this is why you are going thru all of the little towns. That guide was supposed to be made obsolete many years ago, but many states still use it.
Good job! When I used to do heavy equipment haul, it seemed as though they always put us on the smallest, crappiest roads with a multitude of low hanging wires. Never could figure that out. I had many a state patrol and Canadian MP tell me the same thing. Paper pushers back in the office - you got to love them since they have no idea what the hell they're doing. Then you always had drivers that just sat there like a frozen turd in the middle of the road and weren't smart enough to move over out of the way! Guess that's enough of my bitching for now - LOL
Thank your editor for extending the screen time for text, in part one I barely read half of each text string. Part 2, much better. Nice catch, I’ll assume they tasted great!
Who planned that route? It was pretty much a nerve wracking obstacle course all of the way. There sure is a lot more to your job than meets the eye. I really enjoy your great editing - thank you for sharing.
These routes are approved by the state. Which doesn’t say much! But it’s not as easy as you might think. Low bridges, width restricted construction zones, weight limited bridges… all factors that go into choosing a route
@@luckybananaheavyhaul3407 Send a couple of your videos to the State department that picks the routes and when they see what you actually have to contend with, they might rethink some better routes for you.
It never fails to amaze me how these routes are designated by the State as "OK for height" but are definitely not. Especially when they're routing you through rural, small-town Virginia and East Pennsylvania.
100 percent agree. Sometimes I wonder if they are attempting to discourage future oversized loads. I also wonder if Cat couldn't have done a slightly better job with "packaging", I wonder how much "open space" is in that box and whether the roof could have been made to be lowered for transport and then raised to the height needed to maintain the genset?
Ought to send this video to all DOT permitting departments as an educational service. I bet you that half these permitting folks have no clue where they sent these oversized loads into..
@@michaelk7111 I did not drive semis, I only sent loads - usually cranes to refurbish the power plants. I can only relate to you the stories the truckers brought back. Any route that requires you to actually stop to negotiate wires, other than in Winter when the weight causes them to sag, should not, IMHO, be a "route". Funny thing was, I used to have some great friends in ODOT and they told me they ran crews every day in Ohio with "tickle sticks" mounted on their vehicles to see where there were low wires. They could certify heights for each route at certain levels so you guys could maintain traffic flows.
@mostlyinterested1016 our routes are all pre verified. But they only care about hard obstacles like bridges and overpasses. They don’t bother with tree branches or wires.
I can’t believe they sent you guys on those roads I don’t live far from there and I travel those roads quite a bit for work. Did you end up going up over 220 north
I try to explain this because it is something that people who are not in the business just don’t know and understand the complexity of moving these loads between states.
Hey Doug !!! Great riding along & Thanks !!! How many 34 hr. breaks did it take to get up there ??? You stated 2 week run which is about 140 hrs. total ?? Great fishing that you did too !!! 🙃😉😊 Till the next ""ADVENTURE"" ,,,"STAY SAFE ""!!! 🤠😎👀👀👀👍👍👍👍👍
Calme, patience et habiletés 👌👌👌👌👌 Il est agréable d'entendre un de nos régionalisme; ''té a 2 pieds du ''cutter'' ''. A 1:14: 42, isssshhhhhhh; la cargaison qui vacille 😳😳 Et le meilleur pour la toute fin ✌✌✌
Don't know if it's of any interest to you but on part 2 of Virginia Beach to Quebec I noticed your extendable mirrors vibrating a lot. This used to me until I took a bungee cord and twisted it many times then hooked it onto my mirror on the door. Took a lot of the vibration away from the extendable mirrors.
The “guide wires” on the front of the load, are those placed by you guys to help with the power lines? Or was it a part of the load that just so happened to serve that purpose?
Do the people who set up your routes think you are moving with a Smart car or a VW? Since I live in Syracuse, NY I am wondering what route you went from Ovid to Messena (96/414 to 131)? What a great team you have and need!
Hey Doug- Just got back from 50th High School Reunion. Couldn't wait to watch this. Hats off to the whole team. Freaking excellent job. Did you give the PA Trooper a huge tip ? LOL Whatever that town was called should be renamed Low Wire City, even if it was legal for 13' 6. If you knew about the gravel lot at 96/414, how many times have you done this route? Have a good day.
We hauled wind towers through the finger lakes area on a 6 month project last year and a lot of our route was the same. It was all still pretty fresh in my memory. There are only so many places to park trucks this big so it becomes a habit to spot and take mental note of potential parking spots as I’m driving around.
Is the touch pole on the lead car a bit taller than the load, or almost exactly the same height? i'd expect a bit taller to account for raising the trailer or not, and variations in the road height from one end of the rig to the other.
1:11:30 freightliner custom a Eric Jean mechant beau camion, entoukas Doug je suis accrochez a ta chaine je m'abonne certain meme que tu me donne le gout heehawww chummy Keep on Truckin
It's easy to see why this takes two weeks, and all the fiddly bits that can go wrong! I assume if an unexpected detour happens that's extra delay. Your team is fantastic, getting the job done!
Amazing job still just can't understand why they put over sized loads through some of places u went through. I know you stop asking questions long time ago and just drive the route.. good job and bless u and your team
I’m not sure what the maximum dimensions are to use the bridge tunnel but getting a route through the Wilmington/Philadelphia area would’ve been hell for these loads
By the way Doug I drove for Lester Summers out of Ephrata Pa and we oversize for High Concrete,High Steel and Schuykill products ( concrete bridge beams) from 88 to 2000 for what it’s worth 😉
Oh the memories(or nightmares) of many wires like that through the years(thing is most state highways are supposed to be 16ft and interstate a minimal of 20 ft but we know how that goes don't we?
With the time delays due to low wires, it seems like taking an end run back International Falls would be quicker despite being much longer, than the route you’ve been assigned.
It’s usually a decision based on finding a safe place to let them pass. We can’t pull over just anywhere. We try not to hold people up too long but it is inevitable doing this kind of work.
@@luckybananaheavyhaul3407 Yes I can see that with the very narrow roads you are forced to drive on with those wide and long loads your options are limited.
Man I don't know where Pennsylvania permits we're trying to take you but I could have thought of at least three or four different ways to get up to New York without going that idiotic way....
Yes that is usually the rule in most places. However for these loads we were already being escorted by the police so they made the call to move as a convoy.
Wish all wires and tree branches were 20 feet up and all branches were cut back at least 10 feet from the road edge. But then that wouldn't give anyone a challenge. Nice catch, wait two... 💪
It happens on occasion but this company runs 90% east coast and Midwest. And I run mostly USA because I can cross the border. The drivers who can not cross the border for different reasons handle our domestic Canada freight.
I used to get frustrated about this. But my new philosophy is that they’ve just never done my job so they don’t understand. If they spent a day behind my steering wheel they would have a whole different approach to wide loads.
Some people do strongly believe they are in their right to occupy all the space, some others don't have the ability to be able to properly center a SMART on a large road, some others ......
I noticed your pictures are pretty grainy especially when you're looking back for the wires just really hard for us to see cuz they're kind of grainy so I don't know what you're doing different I mean when you point it Forward sometimes that focuses then and then sometimes it doesn't it's good content I just don't understand your different language when you guys are talking amongst yourselves
I often have both English and French escorts in the same team. I’m very lucky to be bilingual and be able to just take that ball and run with it. Not having to think about language issues allows me to focus all my attention on more important things.
Pennsylvania infrastructure is third world, the drivers are poorly educated, and the traffic enforcement is non- existent . Not a truck friendly state.
![ILLSLICK - KILLSHOT REMIX [FULL VERSION]](http://i.ytimg.com/vi/RIK8RrqIAzE/mqdefault.jpg)
When doing heavy haulage, it's always great to have brilliant escorts. Have now seen quite a few of your videos, and Alain is really on top of it all and keeps you safe
And again watching your video should be required by all route planners 😂
And as usual great team work
Amazing video! I can’t believe I watch parts 1&2 - great editing! I am impressed with how you all work together so amazingly. Keep up the great content.
A driver can’t get to this level of transport if he/she isn’t a team player. You need to know how to lead a team and use all the players. The “I don’t need any help” attitude doesn’t get you far here
Very great and educational video: really shows how complex heavy haul can be. It CERTAINLY takes a TEAM to pull it off successfully, cuz there’s TOO MUCH that could go wrong. Kudos to you guys!!!!
Definitely gotta be a team player and team leader at this level of game. There’s no room for the “I don’t need help” attitude!
The USA is still using the home movers guide that was used back in the 50's to route trucks, this is why you are going thru all of the little towns. That guide was supposed to be made obsolete many years ago, but many states still use it.
What worked back then is not working to well nowadays. They need to come up with new routes for oversized loads
Very nice video's and have a great day fishing and nice weekend
Can't believe some of those cars make it difficult for you. Again great video, it didn't disappoint. Greetings from the UK
Good job! When I used to do heavy equipment haul, it seemed as though they always put us on the smallest, crappiest roads with a multitude of low hanging wires. Never could figure that out. I had many a state patrol and Canadian MP tell me the same thing. Paper pushers back in the office - you got to love them since they have no idea what the hell they're doing. Then you always had drivers that just sat there like a frozen turd in the middle of the road and weren't smart enough to move over out of the way! Guess that's enough of my bitching for now - LOL
The more things change, the more they stay the same 😉
Awesome video and the fish are amazing!
amazing houses build right on the sidewalks. the street was so narrow & overhead wires low.
Thank your editor for extending the screen time for text, in part one I barely read half of each text string. Part 2, much better.
Nice catch, I’ll assume they tasted great!
Those where some nice King Salmon you caught there. An one hell of a job on delivering them power units, Kudo's...
Bloody nice fish boss! Awesome video once again.
Who planned that route? It was pretty much a nerve wracking obstacle course all of the way. There sure is a lot more to your job than meets the eye. I really enjoy your great editing - thank you for sharing.
These routes are approved by the state. Which doesn’t say much! But it’s not as easy as you might think. Low bridges, width restricted construction zones, weight limited bridges… all factors that go into choosing a route
@@luckybananaheavyhaul3407 Send a couple of your videos to the State department that picks the routes and when they see what you actually have to contend with, they might rethink some better routes for you.
@BL-jt3qt I didn’t break anything so they’ll keep sending me 🤷🏼♂️
It never fails to amaze me how these routes are designated by the State as "OK for height" but are definitely not. Especially when they're routing you through rural, small-town Virginia and East Pennsylvania.
100 percent agree. Sometimes I wonder if they are attempting to discourage future oversized loads. I also wonder if Cat couldn't have done a slightly better job with "packaging", I wonder how much "open space" is in that box and whether the roof could have been made to be lowered for transport and then raised to the height needed to maintain the genset?
Ought to send this video to all DOT permitting departments as an educational service. I bet you that half these permitting folks have no clue where they sent these oversized loads into..
Well you weren't lying when you said you knew where the big ones are 😂😂 awesome!! So we're ya seeing low wires in your sleep?
@@michaelk7111 I did not drive semis, I only sent loads - usually cranes to refurbish the power plants. I can only relate to you the stories the truckers brought back. Any route that requires you to actually stop to negotiate wires, other than in Winter when the weight causes them to sag, should not, IMHO, be a "route".
Funny thing was, I used to have some great friends in ODOT and they told me they ran crews every day in Ohio with "tickle sticks" mounted on their vehicles to see where there were low wires. They could certify heights for each route at certain levels so you guys could maintain traffic flows.
@mostlyinterested1016 our routes are all pre verified. But they only care about hard obstacles like bridges and overpasses. They don’t bother with tree branches or wires.
Thank you very much for taking me on a trip out of Virginia Beach to Canada I had to take before you are a credit to your company and to the industry!
Thanks for all the videos LB 👍👍
Hi Doug I enjoy your videos and thank you for sharing 👍. Aloha 🌺
Thank you 😊
Awesome team work, be safe duogo.
🤙🤙🤙
Nice catch!! Great video, I am still amazed every video at how well you handle the load and the length.
The video was amazing along with all ofthe teamsworking together. Those 2 kings were amazing fish. Hope you are still fishing before the next trip.
Never enough time spent fishing but what ya gonna do 🤷🏼♂️!
I can’t believe they sent you guys on those roads I don’t live far from there and I travel those roads quite a bit for work. Did you end up going up over 220 north
We were on part of 220 from Pennsylvania into New York
And once again i see your in my neck of the woods. I recognize the area you traveled threw.
The difference in support / escort between states is amazing as well as the accommodation of their highways to your oversize load
I try to explain this because it is something that people who are not in the business just don’t know and understand the complexity of moving these loads between states.
That was one long, slow, tedious ride! I’d go fishing after that run also!!
What a video! I was wondering what those wires at the front were for until you started talking about the runners. Really cool to see those working!
Great work! Now, I know why you make the big bucks. It takes training, skill and team work.
Hey Doug !!! Great riding along & Thanks !!! How many 34 hr. breaks did it take to get up there ??? You stated 2 week run which is about 140 hrs. total ?? Great fishing that you did too !!! 🙃😉😊 Till the next ""ADVENTURE"" ,,,"STAY SAFE ""!!! 🤠😎👀👀👀👍👍👍👍👍
We were parked 2 full weekends so I guess you could say two 34 hour resets.
Thanks for watching 😊✌️
Calme, patience et habiletés 👌👌👌👌👌 Il est agréable d'entendre un de nos régionalisme; ''té a 2 pieds du ''cutter'' ''. A 1:14: 42, isssshhhhhhh; la cargaison qui vacille 😳😳 Et le meilleur pour la toute fin ✌✌✌
Merci 😊✌️
Nice work. The crew makes these moves look easy
WOW, another hour and a half ! You rock !
Beau poissons btw
Doug might need to start a fishing channel.
@lancecluster there is a Lucky Banana fishing channel 🤔
@@luckybananaheavyhaul3407 Wow, didn't know. some big fish. You don't do anything small. Nice.
Don't know if it's of any interest to you but on part 2 of Virginia Beach to Quebec I noticed your extendable mirrors vibrating a lot. This used to me until I took a bungee cord and twisted it many times then hooked it onto my mirror on the door. Took a lot of the vibration away from the extendable mirrors.
Thanks for the tip. I’ll try that
The “guide wires” on the front of the load, are those placed by you guys to help with the power lines? Or was it a part of the load that just so happened to serve that purpose?
We (truck drivers) install them on every load when we think wires are going to be an issue.
Family bonding with Dad, awesome!
Certainly heavy haul with those fish too
Do the people who set up your routes think you are moving with a Smart car or a VW? Since I live in Syracuse, NY I am wondering what route you went from Ovid to Messena (96/414 to 131)? What a great team you have and need!
We actually took 104 through Oswego and 3 all the way to Watertown 🙃
Hey Doug- Just got back from 50th High School Reunion. Couldn't wait to watch this. Hats off to the whole team. Freaking excellent job. Did you give the PA Trooper a huge tip ? LOL Whatever that town was called should be renamed Low Wire City, even if it was legal for 13' 6. If you knew about the gravel lot at 96/414, how many times have you done this route? Have a good day.
We hauled wind towers through the finger lakes area on a 6 month project last year and a lot of our route was the same. It was all still pretty fresh in my memory. There are only so many places to park trucks this big so it becomes a habit to spot and take mental note of potential parking spots as I’m driving around.
@@luckybananaheavyhaul3407 Thanks
Is the touch pole on the lead car a bit taller than the load, or almost exactly the same height? i'd expect a bit taller to account for raising the trailer or not, and variations in the road height from one end of the rig to the other.
We normally set the lead car 6 inches above actual load height. If he hits something, we know I will be close.
What engine and hp in your tractor ??? 2 excellent videos on this trip 👍👍
Cummins 565 in this one
The speed limit is 30 miles per hour, not 30 miles per day...
Tell me about it 😤
1:11:30 freightliner custom a Eric Jean mechant beau camion, entoukas Doug je suis accrochez a ta chaine je m'abonne certain meme que tu me donne le gout heehawww chummy Keep on Truckin
Bienvenue abord!! ✌️😊
dang! optical illusions galore where it looked like your load was off to the left on your trailer.
I promise it was well chained down 🤣
@@luckybananaheavyhaul3407 well yeah, that's why illusions was said. ;)
It's easy to see why this takes two weeks, and all the fiddly bits that can go wrong! I assume if an unexpected detour happens that's extra delay. Your team is fantastic, getting the job done!
Thank you! Happy to have you along for the ride
Amazing job still just can't understand why they put over sized loads through some of places u went through. I know you stop asking questions long time ago and just drive the route.. good job and bless u and your team
Have you ever thought about a camera on the roof with a monitor in your truck to watch the low wires?
No I haven’t tried that but for sure it could work 👍
Why didn't you take the Chesapeake Bay bridge tunnel?
I’m not sure what the maximum dimensions are to use the bridge tunnel but getting a route through the Wilmington/Philadelphia area would’ve been hell for these loads
Great video. Thanks
Have you ever had steering rear axles on your trailers to get you round those tight corners 😊
Yes, check out some of my other videos.
good catch m8.
By the way Doug I drove for Lester Summers out of Ephrata Pa and we oversize for High Concrete,High Steel and Schuykill products ( concrete bridge beams) from 88 to 2000 for what it’s worth 😉
The red trucks with yellow wheels I believe
@@luckybananaheavyhaul3407 no they’re green with yellow letters the ones you’re talking about are High Steels own 🛻
Oh the memories(or nightmares) of many wires like that through the years(thing is most state highways are supposed to be 16ft and interstate a minimal of 20 ft but we know how that goes don't we?
How was it like for all crossing the border bridge into Canada?
Is all the loads going to the same place?
Sincerely!
R.S.V.
With the time delays due to low wires, it seems like taking an end run back International Falls would be quicker despite being much longer, than the route you’ve been assigned.
You’re correct. Probably would’ve been the same time despite the extra mileage
Would you have to detach the jeep if you had a steerable trailer ?
No, one of the three trucks had a steerable and he did not need to detach
How often do you let the traffic built up behind you pass? Is it a volume decision or a time decision?
It’s usually a decision based on finding a safe place to let them pass. We can’t pull over just anywhere. We try not to hold people up too long but it is inevitable doing this kind of work.
@@luckybananaheavyhaul3407 Yes I can see that with the very narrow roads you are forced to drive on with those wide and long loads your options are limited.
Why dont you have steering axles on the trailer ? You would never see it in DK😊
It all comes down to the almighty dollar $$$. They’re still trying to do it with low budget equipment to be competitive in this business.
That is one long hill.
Man I don't know where Pennsylvania permits we're trying to take you but I could have thought of at least three or four different ways to get up to New York without going that idiotic way....
Story of my life 🤷🏼♂️
When I hauled oversize out of pa,if you were not 1000 feet apart they would give you a ticket for convoying usually by the local police.
Yes that is usually the rule in most places. However for these loads we were already being escorted by the police so they made the call to move as a convoy.
They did that with us too when we did the big dig in Boston, like 20 trucks at a time
This section of your trip should have been done at two in the morning, i know some states that will allow that so save problems with traffic.
Wish all wires and tree branches were 20 feet up and all branches were cut back at least 10 feet from the road edge. But then that wouldn't give anyone a challenge.
Nice catch, wait two... 💪
I do enjoy a good challenge 🤙
36:28 a beautiful sight!
I think so too 😊
I agree
Mercy sakes looks like we got us a convoy 10-4.
You ever do cross Canada to West Coast?
It happens on occasion but this company runs 90% east coast and Midwest. And I run mostly USA because I can cross the border. The drivers who can not cross the border for different reasons handle our domestic Canada freight.
@@luckybananaheavyhaul3407 Cheers mate. For some reason your vids have a mellow therapeutic vibe to them.
@charleswindsor1184 they’re not really intended to be therapeutic 🤣 but whatever works for y’a! ✌️
Seems like the rad fan comes on a lot, sure it’s programmed right ?
You are correct. The fan runs a lot in this truck
Kool😮
unreal
Oh look! A truck full of politicians promises.
What language are they speaking?
French
huh I got here 27 seconds after the upload. didnt mean to do that
I know you must see it every day, but why.... why do some drivers not give you all the room they could? They are NOT going to win against you.
I used to get frustrated about this. But my new philosophy is that they’ve just never done my job so they don’t understand. If they spent a day behind my steering wheel they would have a whole different approach to wide loads.
Some people do strongly believe they are in their right to occupy all the space, some others don't have the ability to be able to properly center a SMART on a large road, some others ......
@dhache1195 every day 🤣 🤷🏼♂️
I noticed your pictures are pretty grainy especially when you're looking back for the wires just really hard for us to see cuz they're kind of grainy so I don't know what you're doing different I mean when you point it Forward sometimes that focuses then and then sometimes it doesn't it's good content I just don't understand your different language when you guys are talking amongst yourselves
These are basic cameras. When I try to zoom in the video they lose quality. It’s not Netflix cinema quality movies
Dont they do a dry run the day before to check all these heights before they move the loads.
some of your escorts speak english and others speak French. don't know how you keep track.
I often have both English and French escorts in the same team. I’m very lucky to be bilingual and be able to just take that ball and run with it. Not having to think about language issues allows me to focus all my attention on more important things.
@@luckybananaheavyhaul34071:31:39 9th9thpnomlnono#mlnonoMOno
Pennsylvania infrastructure is third world, the drivers are poorly educated, and the traffic enforcement is non- existent . Not a truck friendly state.
$6.49 a gallon. OMG.