BANSHEE 350 | BILLET CLUTCH BASKET INSTALL | DIY | NO SPECIAL TOOLS!!!
ฝัง
- เผยแพร่เมื่อ 3 ต.ค. 2024
- BANSHEE 350 | BILLET CLUTCH BASKET INSTALL | DIY | NO SPECIAL TOOLS!!!
Here I show you how to replace your stock clutch basket with an aftermarket one. It's not hard to do and can be done in about 30 minutes with basic tools! I hope this helps!
If you like the video please comment, like and subscribe!
Music as follows...
Track 1
Music provided by William Barnes.
Track - Fight Song Heavy Metal Instrumental
Link to track - • Fight Song Heavy Metal...
Track 2
Music provided by Free Songs To Use.
Track - ELPORT - Tremble
Link to track - • ELPORT - Tremble
Track 3
Music provided by SophonicMedia.
Track - Metal Background Music
Link to track - • Metal Background Music
instrumentalsfr...
Had no idea what a clutch actually looked like till I watched this. Thanks for sharing !
Dang trice!
That’s so funny, I saw that thumbnail on Google when I looked up clutch or clutch basket to draw one
Thanks Mike! Rebuilding my buddies Banshee right now, Full rebuild. His basket was shot and I'm ordering him the same Chariot Clutch Basket, I already pretty much know how to swap the gear over, but this was a nice refresher on how to do it. I know this video is old, but hopefully you see this. Have a good one man!
Oh yeah.. Its time to see that thing run now.. The best part of the build
Good job on your videos you made me want to buy a banshee and build a 4 Mill.
Earned a comment for the thumbnail. Lol
Thxx for the info man. Jobe well done!!!!
Thank you. Very informative. Im about to do the same thing.
Good job
Very helpful video! About to do this same install
i wish this was here when i was going through my build
Thanks bud...nice work and helpful
Awesome video man
Nice man...
I need this for blaster 200...!? 🤷♂️
This video helps me a lot, thanks bro,
Great information!
Patrick S thanks for the positive feedback man!
Hi, I have a problem. I'm doing the same with my Yamaha RD 350 ypvs motorcycle. I'm afraid the screws will loosen due to the heat. Or not?!
thanks for the video
Thought I was the only one who used old boxers as rags 🤣👍
Which way does that washer go underneath the plate? Idk if it faces up or down. The cupped washer thing
what size small to large in drill bits ?and great vid
I been having a hell of a time gettng into neutral at idle.. if i rev a little bit it goes in easy or if i dont have the engine running it goes in smooth.. I adjusted the clutch cable with no luck. You think I should pull the clutch cover off to see if my basket is worn? Or will the basket not cause that issue? Its weird it only happens at idle..
Kevin if your fingers are worn, you will usually have an un-smooth clutch action; it will be notchy almost because of the grooves in the basket. I would pull your cover and check your shift adjustment. south Texas banshee has a video on how to adjust it (it's easy)
will do thanks for the response buddy
No problem dude!
Search: South texas banshee PT4
It's a short video
Great video did you use stock oem hub and pressure plate waiting on my basket also
Does this fit an air cooled RD 350??
hey man I broke the eccentric bolt on my banshee and got the new one put in fairly easily but then dear lord it came time to put the case side cover back on and had some serious issues, but was wondering if you ever have issues with the radiator feed trying to slide out of the case when u put the side cover back on, between that, keeping the gasket centered and lining up the kicker spring it sucked ass getting it back on..then once I did get it back togetber I went for one short ride and lost all the resistance in my clutch handle...fml!!!...I am not a mechanic, any advice on how to adjust the clutch shaft or whatever its called once I get it back apart?
Anybody know where you can get just the four screws for the backing plate?
how much lighter the new basket was?
did u push in the spacer the wrong way? hehe hope not
Where's the Tank top Girl ?
Click bait, that's how you get views
Putting attractive women in the thumbnails is something I tried for a short period of time and I discovered that putting pictures of the actual related content get more views, at least on my channel.
Cut the music
Why does he say wuder
haha budget build
JL's INC. lmao shut up
Red Loctite.