ขนาดวิดีโอ: 1280 X 720853 X 480640 X 360
แสดงแผงควบคุมโปรแกรมเล่น
เล่นอัตโนมัติ
เล่นใหม่
More old school cool! Thanks RM
Just a suggestion you should make dedicated playlists for each machine for easy search, thanks
Tac well it’s all theory, you can learn from this video and apply it to many other machines
Nice video!!!
RM im installing a clutch cover and the lock up, do i got to replace the clutch pads too?
Video on how to clean carbs on banshee and jet tune for factory?
I’ve looked for these rubber cushions on your online parts store and can’t find them!Do you have a part number for these?
hello friend I have a problem in my 2006 yamaha banshee when I put the first one it turns off that could be??
Hey RM you should add illusive gloves and merchandise to your store they have really good and cool products
We'll check them out. Thanks for the suggestion!
Rocky Mountain ATV MC can you put a R1 clutch on a banshee?
@@josecollazos6 did you try it?
M C ya i did
What about the indents on the fibers. Are they the same as the 60° separation on the metal plates. These are on a Tusk clutch
Thanks
I can't find the part number for the o'ring for the water port. please help a
How do I go about adjusting the clutch if I have the magura hydraulic clutch lever?
That was real quick when adjusting the arrows? Not real clear there ...
Here for clutch repair on a tt350 thanks
Do you have to drain fluids
If you're able to safely tip your quad on its side, you can replace the clutch without changing the oil. But if your clutch is burnt, the oil is probably contaminated and should be changed.
Where you located brother ?
rockymountainatv is located in Utah.
You guys edit to much,that pressure plate you didn't even show how you installed it....
10-15mm of freeplay???? no way...typo?
It's 10-15 mm measured from the END of the lever.Hope that helps!
More old school cool! Thanks RM
Just a suggestion you should make dedicated playlists for each machine for easy search, thanks
Tac well it’s all theory, you can learn from this video and apply it to many other machines
Nice video!!!
RM im installing a clutch cover and the lock up, do i got to replace the clutch pads too?
Video on how to clean carbs on banshee and jet tune for factory?
I’ve looked for these rubber cushions on your online parts store and can’t find them!
Do you have a part number for these?
hello friend I have a problem in my 2006 yamaha banshee when I put the first one it turns off that could be??
Hey RM you should add illusive gloves and merchandise to your store they have really good and cool products
We'll check them out. Thanks for the suggestion!
Rocky Mountain ATV MC can you put a R1 clutch on a banshee?
@@josecollazos6 did you try it?
M C ya i did
What about the indents on the fibers. Are they the same as the 60° separation on the metal plates. These are on a Tusk clutch
Thanks
I can't find the part number for the o'ring for the water port. please help a
How do I go about adjusting the clutch if I have the magura hydraulic clutch lever?
That was real quick when adjusting the arrows? Not real clear there ...
Here for clutch repair on a tt350 thanks
Do you have to drain fluids
If you're able to safely tip your quad on its side, you can replace the clutch without changing the oil. But if your clutch is burnt, the oil is probably contaminated and should be changed.
Where you located brother ?
rockymountainatv is located in Utah.
You guys edit to much,that pressure plate you didn't even show how you installed it....
10-15mm of freeplay???? no way...typo?
It's 10-15 mm measured from the END of the lever.
Hope that helps!