Yamaha TDM 900 Oil Change | Project TDM 900 - Ep. 02
ฝัง
- เผยแพร่เมื่อ 6 ส.ค. 2019
- Hello folks!
I this video we are gonna have a look on how to change the oil on my Yamaha TDM 900 which is part of the most basic motorcycle maintenance procedures. On the Yamaha TDM and on some other motorcycles which run a dry sump lubrication system the procedure is a little bit different as you will need to drain the oil from the sump as well as from the oil tank.
If you found this video helpful then give it a thumbs up, consider subscribing to my channel and don’t forget to hit the bell icon so you don’t miss out on future videos.
Take care and I’ll se you in a bit!
MOTUL 7100 10W40 4L:
amzn.to/2VpX560
HIFLO HF145 Oil Filter:
amzn.to/321TKfS
Oil drain pan:
amzn.to/35fmuE2
Copper crush washer set:
amzn.to/2SW9m5f
My Fav Tools:
Bahco 34pc Socket set:
amzn.to/35kcM3m
Bahco 104pc Socket set and spanners:
amzn.to/2nvrX8P
Wera 6pc Screwdriver Set:
amzn.to/2AWGuxa
Teng Tools Torque Wrenches:
40-210 Nm: amzn.to/35lKs0j
20-100 Nm: amzn.to/35lKuVZ
5-25 Nm: amzn.to/33fv83G
Support me on Patreon:
/ thegarageuk
You can also follow me on the socials:
Instagram: @nandorsgarage
Facebook: / nandorsgarage - ยานยนต์และพาหนะ
![Mountain chase | YAMAHA TRACER 900 x YAMAHA TDM 900 x TRIUMPH TIGER 1050 [4K]](/img/n.gif)
What toolkit are you using, just getting into working on my bike and dunno what toolkit to buy. Suggestions?
I use a Bahco socket set, a screwdriver set and a spanner set. These three sets cover 90% of the work I do on my bikes. I’ll leave a link in the description for my favourite tools if you want to check them out.
@@TheGarage2018 thanks, I appreciate it :)
@@thatmaddude6047 no worries mate!
The stuff I mentioned above is perfect to get you started and once you get the hang of doing stuff on your bike you can slowly add tools over time, maybe get a torque wrench and whatnot :)
Wow, you were patient using a funnel to fill her up! I tried it just once and lost an hour of my life I'll never get back... I now use a giant oil syringe which holds about 200ml and takes all of about six and a half minutes to fill the reservoir with minimal mess. I'm now onto my second TDM 900 after nineteen years and 156,000km on the first, which is still running beautifully (friend had to sell his late model TDM and I couldn't refuse his offer). I'm so glad we don't have to deal with salt on our roads down here in Oz because it looks as though it creates havoc with alloy...
Not a bad idea using a giant syringe, thanks for the tip! Yeah, I’m in the UK and all the bikes I’ve had so far the radiators were rotten :)):)).
Heating up the oil by keeping it on a radiator for some hours or overnight gives higher flow rates and safes some minutes aswell
Loving the videos and the information is great 👍the random bad language is brilliant 🤩 keep it going 👍
Thanks dude! I’m glad you find it entertaining:)
hello do you maybe have any info about orings that comes on bootom part where you change the oil filter.two o rings small nad bigger one...cheers
is the same like my xtz 750 i just close the bolt of oil last.. bacerfule there not much strong id lose oil beter change the metal oring wacher
What year is your TDM fella? Does it have the oil galley bolt on the engine near side like the early one for checking there’s proper circulation or did they dispense with that on the 900? Just bought a 900 and want to do some spannering on it! Cheers, Edd.
Can you please write in description what number of wrench you use for unscrew engine oil drain bolts, and also number allen wrench hex key for unscrew oil filter
12mm for the oil tank drain plug and 17mm for the oil sump drain plug. Use either a socket or a ring spanner. The oil filter housing bolts are a 5mm hex.
I didn't see the O rings replaced on the oil filter housing. Did I miss this?
No, I haven’t replaced the o-ring, there was no need.
What maintenance manual do you use? I cannot find a decent workshop manual?
I use the Haynes manual
I've seen that you use MOTUL engine oil, what spec is the oil for Yamaha TDM 900?
10w30 is recommended in the manual, alternatively you can use 10w40. If you are unsure of what oil to use MOTUL has a handy oil selector option on their website. www.motul.com/rs/en/lubricants
Works for looking up car oils as well.
10/40
do you what sizes of crush washer are needed?
Hi, i cant remember the exact size, i bought a 300 piece copper crush washer set off Amazon so i was never really concerned about the size of it, i just selected one out of the set that fits the drain plug. There is a link to this copper washer set in the video description. Thanks for watching.
I don’t think 🤔 you said how much oil totally ? , you said put 3 lts in then add the rest after starting the bike and rev the engine 5-6 times ( how much total ? )
3.5 litres if I remember correctly.
wehn you put the oil was all 4 litre?? or less ?? you measure??
If i remember correctly it takes 3.9 litres