I have bought these based on this and another review, I only race on ams2 using simagic software. What I have found is the vibration is inconsistent. You may setup thinking that's the right strength and know the feel. Then the feeling can alter significantly feeling much less or more intense even feeling like the frequency has changed. I suspect it depends where the motor is relative to the commutator and brush given it's a normal DC brush motor being fed an AC signal The higher the frequency the more inconsistent it is. It's not a deal breaker but is a limitation of the motor style haptic. I have found keeping 30hz and below helps along with optimisation of the strength. I use slip, abs, wheel, spin and traction control. Still great for such a cheap item but I suspect this is the main difference between these and the more expensive ones. Just a little surprised it's not mentioned in the reviews.
The Neo shakers are great for the money but they are as entry level as it comes. I would suggest using simhub as your software it is more reliable and would give a more consistent result however I doubt it would be much more. Also it is best not run too many effects at once as you can imagine these shakers use a motor if multiple effects are going off at once it’s not possible for it to give signals to both effects simultaneously it will pick one over the other that’s what can cause confusion and different outputs when you are using the shakers. I would run only ABS on my brakes if I drive car without abs I will use wheel lock but when jumping back into car with abs I would have to switch off wheel lock otherwise you could have the little motor trying to give 2 different outputs at the same time.
Hey matey yes these are allot more powerful than the V3's, they work in a similar way with a weight spinning but the Neo shaker would blast them small rumble moters on the v3 any day
Hey matey, they are very good considering the price. The original is more powerful and a bit more punchy. The originals build quality is also better as it’s made of aluminium and the Neo of plastic. It is a nice plastic though
In order to do physics/telemetry based feedback like true wheel lock, tyre slip, ABS, RPM feedback etc. the pedals need to have support for the particular game. Does the SimPro software notify you of which games it supports, which haptic features & settings are available for which game, etc.?
I don’t believe it is shown to you in SimPro but in SimHub a small message under the effect will tell you in iRacing for example that TC will not work. The majority of effects work on most sims most if ac or acc they support all of them to my knowledge but I racing has different telemetry so few might not have. Also when racing in say Dirt Rally I realise not all effects are working. Still 100% worth getting imo
Hay matey, I think the Neo shaker would be 100% for the handbrake, keep in mind though that the original is definitely stronger so if you perhaps have your handbrake mounted on one of your uprights then maybe go original as the vibrations will need to travel quite far through the rig but if handbrake is mounted on your side I think the Neo is more than capable 🙌🏻
i can’t believe your channel hasn’t blown up yet! the quality of your content is fantastic and the energy put into it shows my friend 🙌🏼 definitely earned a sub and am looking to buy these now. do they require the haptic control module as well?
Ah thanks for the positive feedback matey 🙌🏻 I wish I had more time to dedicate to making videos. Not just saying it I actually do find it surprising that I actually have 2k subs il be more than happy to end the year on 3k that would be 2k more than year before 😊 You need the p2000 pedal module and a power supply to make these work does not cost allot & the experience they bring well well worth the money 👍🏻
@@MarkFisch yes you will need one control box that will control 3 shakers. I guess they don’t pair them as some people might be buying units to add on to existing control box 🤷🏼♂️ you will also need 1 power supply. I have seen some resellers selling a kit with it all together for a slight better price but not for Neo ones yet
The mounting screws for attaching bracket to pedals is same however the Neo uses 2 screws to tighten to bracket and the original uses 4 screws. The original HPR can be mounted to the bracket provided with the Neo but not the other way round 👍🏻
The holes under red the Neo shaker is different to the original P-HPR so it won’t fit the original bracket. The Neo has 2 holes to screw onto mount & the original needs 4 screws. You can however mount both on the new L bracket that are provided with the Neo shaker. Thanks for watching matey 🙌🏻
Not sure about the ultimates as I don’t own them however on the sprint pedals I can confirm it will fit onto the throttle with a longer screw but not for the brake. I don’t own the clutch so can’t say if it will fit or not. I have seen someone 3de print something to make these Neo shakers work on sprints if I see the post again I will reply with a link 🙌🏻
Yes you can matey watch this video of mine the shakers are different but works exactly the same 😉👇🏼 YES YOU ARE LOSING OUT!!! - SiMagic Haptics on any Sim Racing Pedals !!! th-cam.com/video/Z6bRDpXkTDg/w-d-xo.html
this might be a really good shaker for Logitech stock g29-923 pedals just 3d print a mount for the pedals and you got a active pedal, pair that with one of the Logitech load cell mods and you have a pretty good budget pedal set.
I have a set of Logitech g23 pedals here but have not tried mounting shakers to them. I think these or any haptics make pedals better regardless of what pedals they are. But yea modding pedals to make them better is the most cost effective way to gain preference with what you got 🙌🏻 thanks for watching matey
I’m really surprised they don’t have curb effects. I’m watching your video and setting mine up so thanks for that. But I was expecting to have curb and road effects or at least curb. Anyways, still very happy with them. Thanks for the help.
Not sure that the Neo be great for curb effects with the motor but the normal shaker should be able to 🤔 I am using curb effects in simhub for dayton audio shakers and it’s amazing
@@TheSimCircuit yeah I bought both the Neo for the accelerator and then the larger one for the break. Looks like I’m gonna have to use Sim hub instead of Sim Pro. I also have the next level racing HF8 haptic seat pad and the telemetry settings for Sim pro is conflicting with the HF8 settings on AMS2 which is my sim of choice because it has the best VR support. If I can get it all working together maybe I’ll just buy another larger one and put the Neo on my clutch. HF8 also does curb affect. It has four independent motors in the seat and four independent motors in the back rest.
@@steffendetrick yea definitely go simhub especially when running multiple devices. Bit harder and little more work to setup but once it’s done it’s done also then you only have to launch simhub and all your gear ready to go without having to run like 5 extra programs in the background 🙌🏻
Bonjour Merci pour cett vidéo je me suis abonné Est-ce que cela fonctionne sur Le Mans ultimate et avec le logiciel simagic ? Est-ce que les nouveaux vibreur s fonctionne avec le boîtier simagic d’origine ? Merci pour les réponses Thierry
Bonjourno I am not sure about Le Mans have not played it in a wile but I don’t see why it won’t work. Yes works with original box so if you already have that and power supply you won’t need anything else 🙌🏻 Merci for watching and the sub matey 🙌🏻
Thank you very much for this informative review. I am strongly considering following your advice and combining the two motors for the upcoming Black Friday sales !
You are very welcome thank you for the kind feedback 🙌🏻 I am not sure if these Neo shakers will be on the Black Friday sale as they are already so cost effective but definitely some good deals to make you spend money on Black Friday that’s for sure 😅
@@XxKABSxX agh yes that will do it. Effects always have to be on two places in simhub. My other video about haptics explains that if you still need some help 🙌🏻
Good stuff man! I already have the older HPRs on my throttle and brake, do you think it would be worth it to put one of these on my clutch and handbrake?
I would not recommend you replace your older ones you have but at $16 each yes I do think that adding them to clutch and handbrake would be perfect for these new ones 🙌🏻 I was running some of effects like Road textures on my clutch and was working fairly well.
Thanks for watching matey much appreciated, yes working hard on that tactile video going to have up to 6 fitted to the seat 🤯 it will probably be towards the end of the year to do that video properly 🙌🏻
Hi Bought the P-HPR Neo Haptic Pedal Shaker but my SimPro Manager 2.0.341 only has limited settings for the P-HPR Neo, I don't see all the settings you do as to setup a event like wheel slip and give it a specific frequency. What version of SimPro Manager are you running?
For the price these are hard very hard to beat. They also allow you to have some fun with your girlfriend 😉 Also you are one person who figured out the iracing setting. 2 other reviews said they were so much weaker but had no clue about that setting. I'm just gonna get these tbh. Tbh I dont want crazy crazy vibrating anyways. Just enough to feel because my feet are sensitive due to nerve issues. Do tingling would happen to much being stronger.
Thanks for watching matey yes if don’t need crazy vibrations these will do you perfect. I still feel these very clear at around 70% I don’t even run at max. The iRacing setting works for most people (literally makes shakers go from max output of 10% to 100% 🤷🏼♂️
Is there anyway to use the set up without needing headphones? I use VR so my audio just goes to my headset. Is it possible to have my computer output audio through the aux and through USB to my headset?
@@phreshxmetal these bass shakers are driven like normal speakers. I was worried if you had to use an audio output in order to drive them then that would override your normal audio requiring the use of an audio splitter and headphones. that isn’t the case since it’s possible to run these off of USB but I just wanted to check before buying everything.
Yes 🙌🏻 I will be very eager to get hand on it. I am using the Asetek button box for my round wheel setup and I like it but have been using it for a wile now. I’d love a Simcore button plate but too much money for me to spend now so the Neo Hub is calling my name 🤙🏼
I have a full Simagic Ecosystem, that I use with a Sigma Cortex Controller, so I can SOLELY use it on my PS5.... are you able to make a video on how to setup (and what to buy) for this HPR system, so I can attach these to my P1000's, while using my PS5? Thank you :) Don (Subscriber)
Hey matey, don’t need a tutorial for pc you screw in the haptics, plug them in and race. I am not sure if it’s possible to make these units work on ps5 as you will need software to send the telemetry data to the shakers. So unfortunately I won’t be able to help with tutorial as I myself don’t know how to and I don’t own a PlayStation either 🤷🏼♂️
@@TheSimCircuit ahhh, ok, no worries.... I just don't want to go and buy the Power Adapter, Simagic Control Box and Haptic Shakers, only to find out it can't (easily) be used with a PS5. Thanks anyway :)
@@StephenParsonsidk I will have to see when they arrive. Worse case I found a guy who said he will be making 3d mounts for these that work on the moza srp loadcell version and srp lites
I ll ordered a HPR and an HPM rambler. Rambler will go on throttle, HPR on brake. Just have to find two decent attachments for my elites v2 pedals. The only thing i m worried about is the noize. I hope you can run them good at a lower output.
No matey I would not recommend buying these if you already own the originals. The original ones are definitely the better of the 2 but I was surprised at how responsive the new ones are especially at that price 🙌🏻
@@alanorzechowski4419the Dayton Audio EX32VBDS-4 are amazing and cheaper than original hpr to buy but will cost allot more setting up with amps ect… and then knowing what to do and were to get profiles are the hard part. If you know all then it’s better for sure
Hey matey this one is designed to be a more budget option. Build quality is good but made of plastic rather than aluminium & it uses motors to generate the vibrations. The motors are a more cost effective option but probably only provide about 60-70% of the strength of the original HPR in my experience 🙌🏻
Yes I ow Mr Latte more than one latte that’s for sure 🤩 he is amazing, would take me years & years to know half what he does about haptics & exciters so having him help a complete noob like me is amazing. The goal is to help everyone, hopefully I can be a small part of that 🤞🏼
@@TheSimCircuit I bought into the SimMagic agitators, but I think once I find a good mounting option for the Dayton BDS exciters on my Fanatec V3 pedals I will probably switch out to those. The RaceBass stuff Latte has is very interesting, I am close to pulling the trigger on amps and exciters for my seat as well. can't wait for the video should be enlightening for all.
The original is better however I think the Neo shakers does an excellent job considering the price. Because you can mix and match these my advice would be to get 1 original for brake then 2 Neos for the clutch and throttle 👍🏻
If you turn them 90 degrees, then they will work well. you can make them. Its nothing new. But the only good thing that they look like a music instrument. 😂
idk about this haptics but p1000 FRS is sucked pedals replace it with VRS never look back , btw can't even sale p1000 nobody is interested in marketplace 😂😢😢
I have tried many pedals but not the VRS ones yet so can’t make a comparison. I do like my p1000 but yes I will never get close to the $ I paid for them 🤦🏼♂️
Hi TSC !! I use Dayton Pucks on my throttle & Brake and larger Seat transducer. Profile: I am using @GamerMuscleVideos TH-cam video how 2 add motion to your rig for 150$. Great video and provides SIM Hub settings for Tire slip/ traction loss/ Shifter clunk. Less is more with SIM Hub depending on how robust of a transducer setup is.✌️
I have bought these based on this and another review, I only race on ams2 using simagic software. What I have found is the vibration is inconsistent. You may setup thinking that's the right strength and know the feel. Then the feeling can alter significantly feeling much less or more intense even feeling like the frequency has changed. I suspect it depends where the motor is relative to the commutator and brush given it's a normal DC brush motor being fed an AC signal The higher the frequency the more inconsistent it is. It's not a deal breaker but is a limitation of the motor style haptic. I have found keeping 30hz and below helps along with optimisation of the strength. I use slip, abs, wheel, spin and traction control. Still great for such a cheap item but I suspect this is the main difference between these and the more expensive ones. Just a little surprised it's not mentioned in the reviews.
The Neo shakers are great for the money but they are as entry level as it comes. I would suggest using simhub as your software it is more reliable and would give a more consistent result however I doubt it would be much more. Also it is best not run too many effects at once as you can imagine these shakers use a motor if multiple effects are going off at once it’s not possible for it to give signals to both effects simultaneously it will pick one over the other that’s what can cause confusion and different outputs when you are using the shakers.
I would run only ABS on my brakes if I drive car without abs I will use wheel lock but when jumping back into car with abs I would have to switch off wheel lock otherwise you could have the little motor trying to give 2 different outputs at the same time.
Hi,
but compared to the Fanatec V3 motors, which in my opinion are imperceptible, are these more powerful?
Thanks
Hey matey yes these are allot more powerful than the V3's, they work in a similar way with a weight spinning but the Neo shaker would blast them small rumble moters on the v3 any day
Hi, how would you compare this SIMAGIC P-HPR Neo with the original linear SIMAGIC P-HPR? Thanks!
Hey matey, they are very good considering the price. The original is more powerful and a bit more punchy. The originals build quality is also better as it’s made of aluminium and the Neo of plastic. It is a nice plastic though
My instinct watching your video said Neo is better to use with my girlfriend. I think I can present her with MAGIC. Thank you.
I feel like I can read this comment two ways. Does your girlfriend sim race? 😂
@@GeneAuyeung We're good drivers for each other. 😆
😂😂😂 this made laugh matey thanks for that 🙌🏻you sound very confident in the Magic you produce 😉
@@lucalee1166 xexexe
bro If you make money then do what your heart desires, pls stop using excuse to your self and btw life is short
In order to do physics/telemetry based feedback like true wheel lock, tyre slip, ABS, RPM feedback etc. the pedals need to have support for the particular game. Does the SimPro software notify you of which games it supports, which haptic features & settings are available for which game, etc.?
I don’t believe it is shown to you in SimPro but in SimHub a small message under the effect will tell you in iRacing for example that TC will not work. The majority of effects work on most sims most if ac or acc they support all of them to my knowledge but I racing has different telemetry so few might not have. Also when racing in say Dirt Rally I realise not all effects are working. Still 100% worth getting imo
You mentioned which you recommended for each pedal, but which do you recommend for the handbrake?
Hay matey, I think the Neo shaker would be 100% for the handbrake, keep in mind though that the original is definitely stronger so if you perhaps have your handbrake mounted on one of your uprights then maybe go original as the vibrations will need to travel quite far through the rig but if handbrake is mounted on your side I think the Neo is more than capable 🙌🏻
Where can I get the new pedal faces? Can't see them on the simagic website, thanks.
Hey matey I believe they will be releasing them very soon unfortunately I don’t have an exact date for you.
i can’t believe your channel hasn’t blown up yet! the quality of your content is fantastic and the energy put into it shows my friend 🙌🏼 definitely earned a sub and am looking to buy these now. do they require the haptic control module as well?
Ah thanks for the positive feedback matey 🙌🏻 I wish I had more time to dedicate to making videos. Not just saying it I actually do find it surprising that I actually have 2k subs il be more than happy to end the year on 3k that would be 2k more than year before 😊
You need the p2000 pedal module and a power supply to make these work does not cost allot & the experience they bring well well worth the money 👍🏻
@@TheSimCircuit so you need the control box? Why don’t they just have a package with the box. Do u need it to use them only with simhub?
@@MarkFisch yes you will need one control box that will control 3 shakers. I guess they don’t pair them as some people might be buying units to add on to existing control box 🤷🏼♂️ you will also need 1 power supply. I have seen some resellers selling a kit with it all together for a slight better price but not for Neo ones yet
Probably something to do what the wanking euphemisms! Amazin
Are the mounting screws the same distance
The mounting screws for attaching bracket to pedals is same however the Neo uses 2 screws to tighten to bracket and the original uses 4 screws. The original HPR can be mounted to the bracket provided with the Neo but not the other way round 👍🏻
one last ? Can these be used cwith the sim magic software or only with simhub. Thanks
@@MarkFisch both with SiMagics new software and simhub also 🙌🏻 so very versatile considering the price of these.
Great content as always mate
Appreciate the positive feedback and you watching matey, thank you 🙌🏻
Is this work for the console (via the converter) as well ? Many thanks.
Hey matey I am not sure sorry. I don’t have any consoles so can’t check for you either 🤷🏼♂️
Checked w Brooks, it does not work at the moment, but their Development Team might explore. Thanks to your time anyway.
@@ksmlckcklai1149be amazing if they do work consoles 🙌🏻 that will make lots of people very happy
Hello, witch SimPro Manager software version are you using ? I haven't got all the haptic options you have (P2000 - two P-HPR)
Using this one here matey 👇🏼
image.simagic.com/profile/upload/2024/08/21/SimProManager-C2.0.342.2-Setup.exe
@@TheSimCircuit Thanks !
Great video...quick question...can the neo s be attached to fanatec v3s with the same bracket as the original ....many thanks ...
The holes under red the Neo shaker is different to the original P-HPR so it won’t fit the original bracket. The Neo has 2 holes to screw onto mount & the original needs 4 screws. You can however mount both on the new L bracket that are provided with the Neo shaker.
Thanks for watching matey 🙌🏻
Is it possible to mount these to Heusinkveld style pedals with the included mount?
Not sure about the ultimates as I don’t own them however on the sprint pedals I can confirm it will fit onto the throttle with a longer screw but not for the brake. I don’t own the clutch so can’t say if it will fit or not. I have seen someone 3de print something to make these Neo shakers work on sprints if I see the post again I will reply with a link 🙌🏻
Here is the link matey 🙌🏻
simracemods.com/products/simagic-rumble-haptic-pedal-reactor-neo-p-hpr-neo-mount-for-heusinkveld-sprint?
@@TheSimCircuit Thanks my guy!
I just bought one of these for throttle and the original for the brake to go on my Logitech g pro pedals what bracket i need?
Hey mate here is a link on etsay for mount you need. I don’t know the seller just someone I googled
www.etsy.com/uk/listing/1668667108/
Would it be recommended to buy a HPR for my brake and HPR Neo for my accelerator?
Yea think that would suit 100% don’t need all that power for throttle 👍🏻
How can I obtain the new software because it is not found on the simagic page?
image.simagic.com/profile/upload/2024/08/21/SimProManager-C2.0.342.2-Setup.exe
Hello! Is it possible to use this new shaker on another pedals (simsonns for example) or it ids just made for simagic? Thanks!
Yes you can matey watch this video of mine the shakers are different but works exactly the same 😉👇🏼
YES YOU ARE LOSING OUT!!! - SiMagic Haptics on any Sim Racing Pedals !!!
th-cam.com/video/Z6bRDpXkTDg/w-d-xo.html
@@TheSimCircuit Thank you! Got it!
this might be a really good shaker for Logitech stock g29-923 pedals just 3d print a mount for the pedals and you got a active pedal, pair that with one of the Logitech load cell mods and you have a pretty good budget pedal set.
I have a set of Logitech g23 pedals here but have not tried mounting shakers to them. I think these or any haptics make pedals better regardless of what pedals they are. But yea modding pedals to make them better is the most cost effective way to gain preference with what you got 🙌🏻 thanks for watching matey
Why can I only active abs, tc and clutch as effects? Iam using simagic software
👇🏼👇🏼
image.simagic.com/profile/upload/2024/08/21/SimProManager-C2.0.342.2-Setup.exe
@@TheSimCircuit still not working for me l have control box and when install says p2000 haptic v1.2.4 not like u on v1.2.7
I had to do manual flash to get more settings but still on v1.2.4
@@johnletham4550 hey matey I am not sure 🤔 for me it was as easy as installing the software 🤷🏼♂️ did you get it working in the end?
@iz_nevez1114 settings->update->manual firmware pedals/p2000h folder if u have control box that worked for me have all settings now :)
I’m really surprised they don’t have curb effects. I’m watching your video and setting mine up so thanks for that. But I was expecting to have curb and road effects or at least curb. Anyways, still very happy with them. Thanks for the help.
Not sure that the Neo be great for curb effects with the motor but the normal shaker should be able to 🤔 I am using curb effects in simhub for dayton audio shakers and it’s amazing
@@TheSimCircuit yeah I bought both the Neo for the accelerator and then the larger one for the break. Looks like I’m gonna have to use Sim hub instead of Sim Pro. I also have the next level racing HF8 haptic seat pad and the telemetry settings for Sim pro is conflicting with the HF8 settings on AMS2 which is my sim of choice because it has the best VR support. If I can get it all working together maybe I’ll just buy another larger one and put the Neo on my clutch. HF8 also does curb affect. It has four independent motors in the seat and four independent motors in the back rest.
@@steffendetrick yea definitely go simhub especially when running multiple devices. Bit harder and little more work to setup but once it’s done it’s done also then you only have to launch simhub and all your gear ready to go without having to run like 5 extra programs in the background 🙌🏻
you can if you use simhub to run them
Bonjour
Merci pour cett vidéo je me suis abonné
Est-ce que cela fonctionne sur Le Mans ultimate et avec le logiciel simagic ?
Est-ce que les nouveaux vibreur s fonctionne avec le boîtier simagic d’origine ?
Merci pour les réponses
Thierry
Bonjourno
I am not sure about Le Mans have not played it in a wile but I don’t see why it won’t work. Yes works with original box so if you already have that and power supply you won’t need anything else 🙌🏻
Merci for watching and the sub matey 🙌🏻
Thank you very much for this informative review. I am strongly considering following your advice and combining the two motors for the upcoming Black Friday sales !
You are very welcome thank you for the kind feedback 🙌🏻 I am not sure if these Neo shakers will be on the Black Friday sale as they are already so cost effective but definitely some good deals to make you spend money on Black Friday that’s for sure 😅
@@TheSimCircuit Let me hope :p
Is there a list of compatible PC games?
I play ACC, Forza Motorsport, AC mostly
Can confirm they work on ACC & AC not sure about forza
Did you find us online?
I just joined your discord there now, looks very good 👍🏼
Awesome. I sent you a DM, you'll get the request
if i uncheck vibrate wheel and pedals in iracing i get no feedback at all through pedal haptics
Might depend what wheel your using, check it and try again. Do you have Logitech or thrustmaster wheel?
@@TheSimCircuit i think i didnt setup simhub properly. i went straight to motor output without enabling effects profile
@@XxKABSxX agh yes that will do it. Effects always have to be on two places in simhub. My other video about haptics explains that if you still need some help 🙌🏻
Good stuff man! I already have the older HPRs on my throttle and brake, do you think it would be worth it to put one of these on my clutch and handbrake?
I would not recommend you replace your older ones you have but at $16 each yes I do think that adding them to clutch and handbrake would be perfect for these new ones 🙌🏻 I was running some of effects like Road textures on my clutch and was working fairly well.
dude, awesome video and really looking forward to the how to vid! been looking to add some shakers to my seat.
Thanks for watching matey much appreciated, yes working hard on that tactile video going to have up to 6 fitted to the seat 🤯 it will probably be towards the end of the year to do that video properly 🙌🏻
Hi Bought the P-HPR Neo Haptic Pedal Shaker but my SimPro Manager 2.0.341 only has limited settings for the P-HPR Neo, I don't see all the settings you do as to setup a event like wheel slip and give it a specific frequency. What version of SimPro Manager are you running?
This one here matey 👇🏼
image.simagic.com/profile/upload/2024/08/21/SimProManager-C2.0.342.2-Setup.exe
Moza is also realesed their new CRP 2 pedals. I'm so excited about all these new gear
Oh very exciting yes. It has never been better to be a virtual racer 🤩
But it’s just a copy of the P1000 though
@@wangte27 yea they seem similar but sounds like you can later on add their new active pedal onto these pedals 🤷🏼♂️
Does the software for the new rumble motors also work for the original haptic motors?
Yes works great on both 😉
@@TheSimCircuitjust used your link for the new software. Works amazing on the original haptic motors
@@SIMRIG412yea it actually does work well, probably a bit easier to understand than using Simhub.
For the price these are hard very hard to beat. They also allow you to have some fun with your girlfriend 😉
Also you are one person who figured out the iracing setting. 2 other reviews said they were so much weaker but had no clue about that setting. I'm just gonna get these tbh.
Tbh I dont want crazy crazy vibrating anyways. Just enough to feel because my feet are sensitive due to nerve issues. Do tingling would happen to much being stronger.
Thanks for watching matey yes if don’t need crazy vibrations these will do you perfect. I still feel these very clear at around 70% I don’t even run at max. The iRacing setting works for most people (literally makes shakers go from max output of 10% to 100% 🤷🏼♂️
Is there anyway to use the set up without needing headphones? I use VR so my audio just goes to my headset. Is it possible to have my computer output audio through the aux and through USB to my headset?
You don't need headphones matey all the shakers controled via control box that is plugged in by USB cable to PC 👍🏼
these are shakers for your pedals... what are you talking about?
@@phreshxmetal these bass shakers are driven like normal speakers. I was worried if you had to use an audio output in order to drive them then that would override your normal audio requiring the use of an audio splitter and headphones.
that isn’t the case since it’s possible to run these off of USB but I just wanted to check before buying everything.
Hello! Do they work with F1 24?
I believe they do yes
looks like neo-x hub. My local distributor spill it to me, and they will likely available at the end of 2024. Basically GT Hub with maglink support
Yes 🙌🏻 I will be very eager to get hand on it. I am using the Asetek button box for my round wheel setup and I like it but have been using it for a wile now. I’d love a Simcore button plate but too much money for me to spend now so the Neo Hub is calling my name 🤙🏼
Now we are waiting for an active pedal to replace on the p1000, I hope simagic follows the path of Moza
Oh that be amazing 🤩
I recently discovered your channel and I’m loving your content. Are you South African?
Ah thanks matey, yebo yes I’m South African 😊
Will this work on ps5
I have heard of guys running simhub on ps5 but I have not done myself 🤔
Will they work with inverted pedals?
Yes 🙌🏻
Do these Neo Shakers need a power supply? Great video btw.
Hey matey they do yes. You will need to buy a power supply even if you bought SiMagic pedals but it’s not allot if I remember it’s like £15
I have a full Simagic Ecosystem, that I use with a Sigma Cortex Controller, so I can SOLELY use it on my PS5.... are you able to make a video on how to setup (and what to buy) for this HPR system, so I can attach these to my P1000's, while using my PS5? Thank you :) Don (Subscriber)
Hey matey, don’t need a tutorial for pc you screw in the haptics, plug them in and race. I am not sure if it’s possible to make these units work on ps5 as you will need software to send the telemetry data to the shakers. So unfortunately I won’t be able to help with tutorial as I myself don’t know how to and I don’t own a PlayStation either 🤷🏼♂️
@@TheSimCircuit ahhh, ok, no worries.... I just don't want to go and buy the Power Adapter, Simagic Control Box and Haptic Shakers, only to find out it can't (easily) be used with a PS5. Thanks anyway :)
Dang now I have to order the face plates now. I have my p1000 inverted so I’d prefer the flat faces over the curve
Oh yes I did not even think about the inverted pedals but I think you are right them new pedal faced will 100% be better for inverted setups 🙌🏻
@@TheSimCircuityes I can’t wait! Any clue when they will release?
guess what matey they got released today as far as I know. I seen a post about them earlier on FB
@@SIMRIG412some resellers might take a day or two to put up on their site but as far as I know they are available asoff today
Has any1 get a profile for Porsche cup car iracing? Eitha sumhub or simpro
I ordered 2 of these for my srp loadcell pedals
Very good let us know how you like them 🙌🏻
What’s your plan to mount them?
@@StephenParsonsidk I will have to see when they arrive. Worse case I found a guy who said he will be making 3d mounts for these that work on the moza srp loadcell version and srp lites
I ll ordered a HPR and an HPM rambler. Rambler will go on throttle, HPR on brake. Just have to find two decent attachments for my elites v2 pedals. The only thing i m worried about is the noize. I hope you can run them good at a lower output.
is worth upgrading from the orginal haptic motors. To me these seem way better than the OG's
No matey I would not recommend buying these if you already own the originals. The original ones are definitely the better of the 2 but I was surprised at how responsive the new ones are especially at that price 🙌🏻
@@TheSimCircuit but if we are not thinking about price, what would you recommend? The new ones aren't faster?
@@alanorzechowski4419the Dayton Audio EX32VBDS-4 are amazing and cheaper than original hpr to buy but will cost allot more setting up with amps ect… and then knowing what to do and were to get profiles are the hard part. If you know all then it’s better for sure
A bit late, but yessssssssss!
🙌🏻🙌🏻🙌🏻 appreciate you still watching matey 😊
Ok merci
🙌🏻
how come it only costs 16 dolars if the previous one was 69?
Hey matey this one is designed to be a more budget option. Build quality is good but made of plastic rather than aluminium & it uses motors to generate the vibrations. The motors are a more cost effective option but probably only provide about 60-70% of the strength of the original HPR in my experience 🙌🏻
@@TheSimCircuit that makes sense! I am just about to order two older version motors.
Mr Latte influenced video inbound me thinks...
Yes I ow Mr Latte more than one latte that’s for sure 🤩 he is amazing, would take me years & years to know half what he does about haptics & exciters so having him help a complete noob like me is amazing. The goal is to help everyone, hopefully I can be a small part of that 🤞🏼
@@TheSimCircuit I bought into the SimMagic agitators, but I think once I find a good mounting option for the Dayton BDS exciters on my Fanatec V3 pedals I will probably switch out to those. The RaceBass stuff Latte has is very interesting, I am close to pulling the trigger on amps and exciters for my seat as well. can't wait for the video should be enlightening for all.
but thanks for review
& thank you for watching matey it’s appreciated 🙌🏻😉
I recognize a south african here
Jy weet nie wat ek weet nie 😂 Yes I’m South African 🇿🇦 guilty, thanks for watching Riaan
Never actually says which one is better..
The original is better however I think the Neo shakers does an excellent job considering the price. Because you can mix and match these my advice would be to get 1 original for brake then 2 Neos for the clutch and throttle 👍🏻
If you turn them 90 degrees, then they will work well. you can make them. Its nothing new. But the only good thing that they look like a music instrument. 😂
Turn what 90°? The shaker? The mount includes in kit does not allow to mount them like the old HPR’s
Hey, I have a profile. Just drop Strovich the founder a line
Hey matey thanks for sharing would love to try your profile where do I drop line lol?
idk about this haptics but p1000 FRS is sucked pedals replace it with VRS never look back , btw can't even sale p1000 nobody is interested in marketplace 😂😢😢
I have tried many pedals but not the VRS ones yet so can’t make a comparison. I do like my p1000 but yes I will never get close to the $ I paid for them 🤦🏼♂️
@@TheSimCircuit I keep it both cause no chance to sall it
Hi TSC !! I use Dayton Pucks on my throttle & Brake and larger Seat transducer. Profile: I am using @GamerMuscleVideos TH-cam video how 2 add motion to your rig for 150$. Great video and provides SIM Hub settings for Tire slip/ traction loss/ Shifter clunk. Less is more with SIM Hub depending on how robust of a transducer setup is.✌️
Not motion
I am going to go watch that video later today thank you for the info it’s much appreciated 🙌🏻
Hello! Do they work with F1 24?
Hi matey, as far as I know they do work on F1 24 for Pc 🙌🏻