Im gonna build this system for gaming. Mainboard:Gigabyte B450M DS3H CPU: Ryzen 5 2600 GPU: RX 580 8gb gigabyte Ram: Patriot Viper 4 8GB (2x4GB) Kit DDR4-3000MHz HDD: Toshiba P300 1Tb SSD: Patriot Burst 240GB Netzteil: be quiet! SYSTEM POWER 9 - 400W Gehäuse: Sharkoon S1000 Window Is that a good combination with the Gigabyte B450M DS3H ??
Ive got the same build with the RX570, NVMe drive, 16gb 3000mhz RAM. It can run anything. The only reason I got the RX570 Red Dragon was because it was Open Box and super cheap. My whole build came out to around $600
This board reminds me of the Gigabyte AM2+ 690G board that I had for nine years and my current Gigabyte AM3 760G board for the last two years. Three processors (dual-, quad- and eight-core), 4GB DDR2 and 8GB DDR3, and four video cards in 11 years. Looking forward to getting this board for my next build.
motherboards haven't been just green for ages and I've enjoyed the stylish blue ones in the past. Also my comp has no front fans just one at the back the rest of the case is passive intake which has been plenty enough for me. Also this Mobo was on sale for $80 Canadian which saved me like $30-$40 vs the next model up.
If you buy this mobo remember you need a splitter for the case fans. I dont know if the fans can be rgb tho. Believe me you are going to need them as the mobo runs runs at high temps compared to others
@@vicenteribeiro928 i havent bought led strips and my coolers have an rgb hub. However i did install app center from the mother board and the rgb fusion software. Yoy can find both at the manufacturares site. If you have connected the led to the one led header the mobo has and the led is rgb fusion compatible it should work.
Currently using this board and a Ryzen 5 2600 and 16GB of RAM for my UnRAID server. Currently have about 9 drives (through a SAS Expander card) and it's peachy! Just updated the BIOS to F41 :)
i have this motherboard and im having trouble geting double monitors to run off of my graphics card and the motherboards hdmis. ive watched several videos and im getting no result?
what do you think about this configuration: this motherboard RAM: 2x8 HyperX Fury 2666 c16 ( gonna overclock) CPU: Ryzen 5 3600 (gonna overclock because this motheboard has radiator ) GPU: sapphire rx 5500 xt PSU: Chieftec GPS-600A8
I built a new PC last weekend including this motherboard, Gigabyte B450M DS3H vF50. The problem is NO function keys during startup screen before I access the BIOS Setup program, press the key during the POST. Please help me with a fix.
5 ปีที่แล้ว
The four SATA ports are a chipset limitation. The B350 and B450 chipsets only have four SATA ports. You have to step up to an X370, X470, or X570 to get six SATA ports. Technically on all of those (except possibly the X570) two of those are SATA Express ports, but since nothing actually uses those the motherboard manufacturers repurpose that chipset feature into additional standard SATA ports.
How do I change the voltage of the ryzen 5 2600x processor? I want to leave it in 4.2 and 1.4 V. Where are the options for the voltage? I found only the mhz multiplier clock
I have ordered this bur I am considering? I am going to light 4 fans and 1 led strip. Can I do that with this motherboard? I have ordered a hub with 10 connectivities and 5 volt. Is there an RGB option at this motherboard? Can you tell where it is?
will this board ds3h be ok running a ryzen 7 2700 iv currently got the 1200 but looking to upgrade the cpu to the 2700? cpu list says it supports it but a lot of comments people saying it wont??
With the placement of the PCIe Slots, wouldn't a large GPU would make the other two slots useless? And a large GPU would also make it akward to place the sata connectors
yeah, if you put a GPU in the top slot the 1x under it would become blocked if you were using a dual slot card. The SATA ports are usually fine as there is clearance between the underside of the video card and the board so the sata ports are still usable
it depends on which version of the board you get. The boards sold about 6 months ago needed an older cpu in order to update, but the newer batch of these boards comes pre-updated
I’m going to be building this system for gaming. CPU: Ryzen 5 2600 GPU: GTX 1050ti HDD: Seagate 1TB SSD : Kingston 240GB PSU : EVGA 500W RAM : 2x4GB DDR4 2400MHz Will this be a good setup with the Gigabyte B450M DS3H??
Hello! Jus tnew to this channel. I have a Gigabyte b450m-ds3h with only 1 system fan and rgb header. I plan to get deepcool gammaxx aio L240 and this rf120 3 in1. My concern is how can I sync all the fans(5) and rgb withi only one fan and rgb header? thanks!
Sir just want to ask for suggestion. Im planning to buy ryzen 7 2700x i do already have hyperx 8gb ram, zotac 1050ti 8gb, seasonic 520w bronze. Is it ok to use this board? Can it support in a long gaming or editing? Does it affect vrm? Any suggestion sir. Im confused. Thanks sir :)
Will this work with the ryzen 5 2400g + a Cooler Master - Hyper 212 EVO 82.9 CFM Sleeve Bearing CPU Cooler ? If not what cheep but black, good cooler you can recomend (black, blue upgrade build for the future)
i am building using this board and need a good graphics card, I don't know much about graphics cards as most of my builds had built in cards. build also includs = ryzen 5, 800 watt power supply, soundblaster audigy 5/rx, corsair vengeance ( 2x8 GB) ddr4 dram 3000MHz. can you or someone on here recommend a good one? Thank you very much..
Would u mind helping me building my PC I am stuck and don't know what to plug in where so am confused and I lost my manual So I can't really consult it
I’ve build my pc with this mobo with a ryzen 3600 I get nothing on my monitor and I can’t boot windows 10 on it or get into bios while my keyboard isn’t getting any power from the usbs
the fact that they didnt put right angled sata connectors is just plain stupid they take up less space and really dont cost that much compared so the regular connectors and get this even some of the higher end models gigabyte sells still only have regular connectors
@@ollydickinson2196 I got disappointed because I thought it had on board WiFi but it doesn't work out of the box or it don't have it at all or I need to download the drivers, but other than that really it's just a motherboard it's basic n it's everything you need. No need to spend hundreds on a "gaming" motherboard when this does everything that does for a lot less
hi to anyone reading this :) is this compatible with 3200g? heard problems that buyers cldnt even POST. does it support 2133 ddr4 ram by Kingston, kvr21n hmmm
@@YoFlikz of course not, it just makes it so you wont be able to use the top sata port, the motherboard comes with 2x 90 degree sata cables to work around this issue so you can still use all 4 sata ports.
In the end it dosn't matter, i perfer the Gigabyte because it has a VRM cooler, Asus Prime dosn't. I wouldent put a Ryzen 9 in any of the boards because of lacking VRMs.
From memory, the 2400g only supports 2933MHz ram but it can run higher and I have seen people run 3200. so yeah it should be fine but I have not personally tested it
@@CPUmodder If I may ask a question, it would mean a lot to me. My local vendor (small town in Serbia) has these 4 boards (in my price range), and it would really mean a lot if you could help me pick one. I intend it for r5 2600, and mostly gaming: 1: Asus Prime B450M-K @ 71€ 2: Gigabyte B450M DS3H @ 74€ 3: Biostar B450GT3 @ 83€ 4: Biostar X470GTQ @ 94€ Ty alot, in advance
I'm doing this build.. Rx 580 8gb gaming x Ryzen 5 2600 1tb Barracuda 120gb ssd Kingston 2x4 ram hyperx 3000mhz Evga 500w And the gigabyte motherboard from this video is this a good build all together it costs 760euros
I have basicly the same build but with out the ssd and instead of 2 ram sticks i have 1 from g skill 3000mhz and a seasonic 520w fully modular and it cost me 590 euros and my gpu is a gigabyte rx 580 8gb and i made it brand new
It says it has 1x RGB led strip header. Can i connect my pc case's three rgb fans to this header via a splitter to use Gigabyte rgb fusion app? if yes i need to connect fans to the system fan header also right? (i'm using cooler master masterbox mb500 it comes with three preinstalled rgb fans and a rgb controller, but i want to use fusion app instead of that rgb controller). Do i have to buy anything else?
I personally haven't used the Coolermaster mb500 with the RGB fans but as long as they have an RGB header that can plug in it should work. you don't need to specifically plug the fans into the motherboard for power but if you want RGB control via the motherboard you will need to plug the RGB header into the motherboard
@@CPUmodder But if i put fans to motherboard for power i can control fan speed via bios, otherwise if i connect fans to smps(power supply) the fan will always spin at 100% right? Also i was little confused if RGB LED strip header is same as normal RGB header and if it is safe to put fan's rgb connector to this header.
Just bought this motherboard and I'm confused as to which the fan headers are and which the CPU header is as there's one called LED_CPU and one called CPU_FAN which im assuming is the cpu one however i can't see this on the MOBO. I got this off the gigabyte website. What about the fan headers? Gigabyte says there's 2 yet on of them is supposedly called CPU_Fan and the other is call sys_fan if i remember correctly. Can anyone help me out?
Im gonna build this system for gaming.
Mainboard:Gigabyte B450M DS3H
CPU: Ryzen 5 2600
GPU: RX 580 8gb gigabyte
Ram: Patriot Viper 4 8GB (2x4GB) Kit DDR4-3000MHz
HDD: Toshiba P300 1Tb
SSD: Patriot Burst 240GB
Netzteil: be quiet! SYSTEM POWER 9 - 400W
Gehäuse: Sharkoon S1000 Window
Is that a good combination with the Gigabyte B450M DS3H ??
yeah looks like a solid build
My exact build you got discord?
Honestly cut down to a 2200g as it's much cheaper and waaaaay more worth the price.
Ive got the same build with the RX570, NVMe drive, 16gb 3000mhz RAM. It can run anything. The only reason I got the RX570 Red Dragon was because it was Open Box and super cheap. My whole build came out to around $600
@@navin7846 can i attach 1 rear and 2 front fans to the fan slot via splitter
This board reminds me of the Gigabyte AM2+ 690G board that I had for nine years and my current Gigabyte AM3 760G board for the last two years. Three processors (dual-, quad- and eight-core), 4GB DDR2 and 8GB DDR3, and four video cards in 11 years. Looking forward to getting this board for my next build.
Lol I had the same one too.
I guess it's kind of randomly asking but do anyone know a good site to stream newly released movies online ?
@Cameron Patrick try FlixZone. You can find it on google :)
@Victor Ryker Yup, I've been using Flixzone for since april myself :D
@Victor Ryker Thanks, signed up and it seems to work :D Appreciate it !
motherboards haven't been just green for ages and I've enjoyed the stylish blue ones in the past.
Also my comp has no front fans just one at the back the rest of the case is passive intake which has been plenty enough for me.
Also this Mobo was on sale for $80 Canadian which saved me like $30-$40 vs the next model up.
If you buy this mobo remember you need a splitter for the case fans. I dont know if the fans can be rgb tho. Believe me you are going to need them as the mobo runs runs at high temps compared to others
have you found out if the mobo works with rgb fusion,i've bought it and i've being trying to find out
@@vicenteribeiro928 i havent bought led strips and my coolers have an rgb hub. However i did install app center from the mother board and the rgb fusion software. Yoy can find both at the manufacturares site. If you have connected the led to the one led header the mobo has and the led is rgb fusion compatible it should work.
Arcane Ursa what kind of splitter did you buy
Does the light strip on this mobo light up only orange? Was not able to change the colour with rgb fusion.
same
U probably bought an 1 color strip
how many rgb header did this motherboard has???please tell me😭😭😭
Currently using this board and a Ryzen 5 2600 and 16GB of RAM for my UnRAID server. Currently have about 9 drives (through a SAS Expander card) and it's peachy! Just updated the BIOS to F41 :)
Z Vaper Going to be doing something similar. What do you have in terms of fans? Trying to decide between a few splitters or a hub. First build
does it have onboard wifi
i have this motherboard and im having trouble geting double monitors to run off of my graphics card and the motherboards hdmis. ive watched several videos and im getting no result?
Where is the RGB?
On the pride flag
Just bought this board for my first PC build. I’m still buying parts when I get the money.
Same so far i got ram and this motherboard
KristijanOTB I have bought everything and just waiting on the PSU to arrive.
The BIOS has an option for NVMe RAID mode. How's that possible with only one M.2 socket?
thinking of buying this so i can switch ryzen 3600
got my rig yesterday r5 3600 b450m ds3h 1660super
hey bro, Ryzen5 1600 is a good choice with this motherboard or not? and if i can do overclock on this motherboard?
plz answer both the questions
yes and yes
Will I be OK with an older 300W power source for a basic home file server with 4 hdd's or ssd's?
@@Schweigardt Should be as long as you're not using discreet graphics
what do you think about this configuration:
this motherboard
RAM: 2x8 HyperX Fury 2666 c16 ( gonna overclock)
CPU: Ryzen 5 3600 (gonna overclock because this motheboard has radiator )
GPU: sapphire rx 5500 xt
PSU: Chieftec GPS-600A8
I built a new PC last weekend including this motherboard, Gigabyte B450M DS3H vF50. The problem is NO function keys during startup screen before I access the BIOS Setup program, press the key during the POST. Please help me with a fix.
The four SATA ports are a chipset limitation. The B350 and B450 chipsets only have four SATA ports. You have to step up to an X370, X470, or X570 to get six SATA ports. Technically on all of those (except possibly the X570) two of those are SATA Express ports, but since nothing actually uses those the motherboard manufacturers repurpose that chipset feature into additional standard SATA ports.
How do I change the voltage of the ryzen 5 2600x processor? I want to leave it in 4.2 and 1.4 V. Where are the options for the voltage? I found only the mhz multiplier clock
Nice work, i have a question for you my friend?
Where is the rgb header? I can’t find it anywhere.
have you found it?
Will this work with vengeance lpx 16gb ddr l4-3200? and will it last
does this motherboard support amd ryzen 5 2600? do you know any motherboard for 100 us dollars that would?
This does, I have a ryzen 5 2600 installed and it works perfectly fine
Is it okay to use a Ryzen 7 2700x with this MoBo and can I make a RGB setup with this board?
Yes and yes
youd probably need an rgb splitter
How are the vrms? Do they overclock well?
Apparently no
I have ordered this bur I am considering? I am going to light 4 fans and 1 led strip. Can I do that with this motherboard? I have ordered a hub with 10 connectivities and 5 volt. Is there an RGB option at this motherboard? Can you tell where it is?
Support Ryzen 5 2600?
Josh yop
So it supports ryzen 2600X too?
yeah, why not xd ?😄
what is the difference between Gigabyte B450M DS3H and Gigabyte B450M DS3H [wifi] (is the only difference that 1 has wifi and the other one not?)
Anyone know where the two fan headers are on this board?
I can’t find it I only have found 1 fan
@@maxwoodjr9050 Oh ok
where is pin for rgb?
Can you overclock ryzen 5 2600 with this board???
Yep
Can i overclock with the stock cooler?
@@kuji8011 Yes but you will not maintain safe temperatures with the stock cooler
will this board ds3h be ok running a ryzen 7 2700 iv currently got the 1200 but looking to upgrade the cpu to the 2700? cpu list says it supports it but a lot of comments people saying it wont??
Where are the rgb headers because i cant find them
With the placement of the PCIe Slots, wouldn't a large GPU would make the other two slots useless? And a large GPU would also make it akward to place the sata connectors
yeah, if you put a GPU in the top slot the 1x under it would become blocked if you were using a dual slot card. The SATA ports are usually fine as there is clearance between the underside of the video card and the board so the sata ports are still usable
This board I found problem with realtek hd audio setup after install windows10. (bios version F50), and no have beep code error speaker in the box.
Is there hdmi on it, im making a 2200g build with no gpu.
I'm Funguy omg same and yea there is
Yeah same just ordered last week
icebling how is it ?
its ok to put r5 3600 in this motherbord? can oc in this bord ?
You probably have to update the bios though so it could be compatible with 3000 series proccessors
I am planning to use a 3600 with this motherboard do I need to use an older cpu to update the bios?
it depends on which version of the board you get. The boards sold about 6 months ago needed an older cpu in order to update, but the newer batch of these boards comes pre-updated
Terry Caldwell can I use a ryzen 5 3600x on it?
@@dpwokn I only have a 3600 running on mine, but I'm sure the 3600x would work just fine
I’m going to be building this system for gaming.
CPU: Ryzen 5 2600
GPU: GTX 1050ti
HDD: Seagate 1TB
SSD : Kingston 240GB
PSU : EVGA 500W
RAM : 2x4GB DDR4 2400MHz
Will this be a good setup with the Gigabyte B450M DS3H??
Yup you should be good bro
Pls can you suggest 50k cpu build....and..great video.
hey is there any fan headers on this motherboard
Hello! Jus tnew to this channel. I have a Gigabyte b450m-ds3h with only 1 system fan and rgb header. I plan to get deepcool gammaxx aio L240 and this rf120 3 in1. My concern is how can I sync all the fans(5) and rgb withi only one fan and rgb header? thanks!
Bro nice video
But what about VRM temperature under load and idle??
do you know the vrm phases of this motherboard?
@@jhny0 4 phases
Can it overclock with Ryzen 3100 and 3200
Sir just want to ask for suggestion. Im planning to buy ryzen 7 2700x i do already have hyperx 8gb ram, zotac 1050ti 8gb, seasonic 520w bronze. Is it ok to use this board? Can it support in a long gaming or editing? Does it affect vrm? Any suggestion sir. Im confused. Thanks sir :)
Nice, can you show us some Benchmarks on overclock? how far can you push it for both cpu and apu?
You cannot go above 3.6ghz on the mobo
Is the bios in this board good? Does it handle memory overclocking and tuning the timings?
I have not extensively looked into the bios but from what I did have a play with it was pretty solid much like the rest of gigabytes line up
The website says it supports 3rd gen, so i dont need bios update for ryzen 5 3600?
If u buy it now will it come with a bios update after it was recently restocked
Hello, how many fans can I use for this Motherboard? I found out that this only has 1 system fan header. My case fan current is 0.25 Amp.
Will this work with the ryzen 5 2400g + a Cooler Master - Hyper 212 EVO 82.9 CFM Sleeve Bearing CPU Cooler
? If not what cheep but black, good cooler you can recomend (black, blue upgrade build for the future)
yeah, the 2400g is supported and the hyper 212 will plug right in as far as I can tell
Can i install an rx580 and an internal wifi adapter on this mobo at the same time?
yep should be fine
Hi,
I have a question. Would this motherboard limit performance of my system in any way? What’s the trade off of the amazing price?
u need a fan splitter if u want two fans
Can I overclock 2200g on this board?
And to how much?
the 2200g should be able to overclock to 3.7ghz
@@haseebx9014 can I oc the gpu at 1600 and leave the cpu at stock? Or maybe take it to 3.7 if I can?
Is this a good build? ryzen 5 2600 with ds3h and geforce gtx 1660?
Hello can i connect 4-5 fans on this fan header? my fans is 0.25A per fan.
Does it have a usb 2.0 header??
Any bios flashback type stuff for this?
i am building using this board and need a good graphics card, I don't know much about graphics cards as most of my builds had built in cards. build also includs = ryzen 5, 800 watt power supply, soundblaster audigy 5/rx, corsair vengeance ( 2x8 GB) ddr4 dram 3000MHz. can you or someone on here recommend a good one? Thank you very much..
Can you onky have static colors using the rgb header on it?
i got one of these boards and i have no problems with it.
Would u mind helping me building my PC I am stuck and don't know what to plug in where so am confused and I lost my manual
So I can't really consult it
u should be able to download it from the internet. Or get it gigabyte website.
you said cant run nvme .? is that right or i misunderstood
i am planning to use Ryzen 7 2600x with RTX 2060 on this motherboard ,, will nvme work?
Yes it supports . Am using this motherboard in my Ryzen build. 😊working fine and smooth. Good luck.
I’ve build my pc with this mobo with a ryzen 3600 I get nothing on my monitor and I can’t boot windows 10 on it or get into bios while my keyboard isn’t getting any power from the usbs
I’m pretty sure u need to update the bios with a second gen ryzen as it cannot operate with a third gen until the bios are updated
the fact that they didnt put right angled sata connectors is just plain stupid
they take up less space and really dont cost that much compared so the regular connectors
and get this even some of the higher end models gigabyte sells still only have regular connectors
Yeah it really sucks, i wish right angle SATA and even 24 pin was just a standard at this point
Got this motherboard with a r7 2700x and a 5700xt ✊✊
How is it bro?
@@ollydickinson2196 I got disappointed because I thought it had on board WiFi but it doesn't work out of the box or it don't have it at all or I need to download the drivers, but other than that really it's just a motherboard it's basic n it's everything you need. No need to spend hundreds on a "gaming" motherboard when this does everything that does for a lot less
Thanks for the info, you will have saved me some money lol
Where can I plug case fans in? Or do I have to buy and adapted to connect them to my power supply
I think you need to connect sata with fan splitters. Im not the best at rhis though so i dont know
I have this board but I can’t seem to find the rgb header.
Same :/
Does it have a system led pin
I want to build a pc with Ryzen 5 2400G and 8gb ram.Will this board work well with it?Also which one is better this or Asrock b450m pro4?
yep it is a solid board and will work
I was wondering, when you say there is 2 fan connectors, do you mean 2 fan connectors excluding the CPU fan connector?
1x Cpu fan, 1x system fan. sucks but its a budget mobo cant ask much. nothing a splitter cant fix tho.
@@user-wg3nn3pu8v where is the system fan located
hi to anyone reading this :) is this compatible with 3200g? heard problems that buyers cldnt even POST. does it support 2133 ddr4 ram by Kingston, kvr21n hmmm
can I slam in my 1600 mhz DDR3 sticks in it to save money?
MB is perfect, when it is working. It appears that it has fabric defect and computer freezes at idle.
look into a warranty swap, gigabyte usually has good support for these types of problems
Yeah, I had an agreement and I am waiting my money back. From 2 days I am using AsRock Fatal1ty B450 gaming K4 and had no issues.
Does it suport RAM: 8GB 3200mhz ripjews, and the ryzen 5 1500x,? grettings from Bosnia
Can I use an RTX 2070 on this board? Heard it only had 4 SATA ports which might limit some GPUs
I have a gtx 1080 FE in it, it only runs into the top sata port, as long as you're okay with just using 3 instead of 4 then you're good.
Scrfin does that affect GPU performance at all?
@@YoFlikz of course not, it just makes it so you wont be able to use the top sata port, the motherboard comes with 2x 90 degree sata cables to work around this issue so you can still use all 4 sata ports.
Scrfin aight thanks
Do I need a bios update for the Ryzen 5 1600 and can this support two case fans and a cpu cooler?
Nope the 400 series boards out of the box work with 2000 and 1000 series CPUs so yep that R5 1600 will just work
does it support m2 nvme with single cut or double cut
?
CORSAIR DOMINATOR PLATINUM 16GB (2 x 8GB) DDR4 DRAM 3000MHz C15 Memory Kit (CMD16GX4M2B3000C15) work on this mobo? I wanna set the dram to 3000mhz
yes technically speaking it will work but it will also depend on your cpu
@@CPUmodder i have an r5 2600
will a ryzen 5 2600 work straight out of the box???? btw good video i subbed to ya
yep 2000 series ryzen chips work straight out of the box with 400 series motherboards so yep should be all good
@@CPUmodder ok thanks bro best of luck in the future you deserve to do well your videos are good and your very friendly
Can its handle a Ryzen 5 2600 im new to pc and i want to make a build with this
yes, it's an AM4 upgradeable. I have the ryzen 3 2200g with this motherboard and could slap in a ryzen 5 or 7 in it for better performance
this motherboard have VRM for the phases?
It's good for overclock?
suport ryzen 7 2700 and/or ryzen 3000?
thanks and good day!!!!!!!!!!!
It will work for some mild overclocks but I would not expect the same level as an x series motherboard
B450M DS3H or Asus / Prime B450M-Gaming/BR?
The Asus Prime FOSHO
In the end it dosn't matter, i perfer the Gigabyte because it has a VRM cooler, Asus Prime dosn't. I wouldent put a Ryzen 9 in any of the boards because of lacking VRMs.
It has an orange led with effects
wHAT EFFECTS? can't find any, it just looks like an indicator that sdoesn;t do anything.
Asrock b450m pro4 or Gigabyte b450m ds3h??
Will it support 3200mhz ram? Cpu: ryzen 5 2400g
From memory, the 2400g only supports 2933MHz ram but it can run higher and I have seen people run 3200. so yeah it should be fine but I have not personally tested it
Hey does this motherboard support a rx 5700xt graphics card?
can this support a zotac geforce gtx 1070 ti amp edition?
yep
@@CPUmodder If I may ask a question, it would mean a lot to me. My local vendor (small town in Serbia) has these 4 boards (in my price range), and it would really mean a lot if you could help me pick one. I intend it for r5 2600, and mostly gaming:
1: Asus Prime B450M-K @ 71€
2: Gigabyte B450M DS3H @ 74€
3: Biostar B450GT3 @ 83€
4: Biostar X470GTQ @ 94€
Ty alot, in advance
I got a ryzen 3600 and a rx 5500 txt takes like a beast it good mother board
how many fans can i use with this motherboard without any fan splitter or fan hub
only two, including one for the cpu. Seems like we need a/some splitter(s)
how many Ampers does the Sys-fan header have??
could you oc with a ryzen 7 2700x on this board?
yes
Can I change the color of the orange led light?
If I have a r5 2600 will my Corsair vengeance rgb pro 2x8 GB DDR4 3200MHz C16 Ram be compatible with this motherboard?
It is compatible with DDR4 yes although i dont recommend this mb
I'm doing this build..
Rx 580 8gb gaming x
Ryzen 5 2600
1tb Barracuda
120gb ssd Kingston
2x4 ram hyperx 3000mhz
Evga 500w
And the gigabyte motherboard from this video is this a good build all together it costs 760euros
Max00XR FNBR weird is building almost the same build
HOLY FUCK WE HAVE THE SAME EXACT FUCKING PC!!!!!!
Same lol
@Tomasz Baranowski ikr🤣
I have basicly the same build but with out the ssd and instead of 2 ram sticks i have 1 from g skill 3000mhz and a seasonic 520w fully modular and it cost me 590 euros and my gpu is a gigabyte rx 580 8gb and i made it brand new
How many fans and/or rgb can you connect to the same header?
What Ram should I put in it. and if i have ram do i need a ssd?
Hey bro
Can i use ryzen 7 4th gen with this motherboard?
see specs of 4000 series if they are am4 socket. if so, then its compatible
It says it has 1x RGB led strip header. Can i connect my pc case's three rgb fans to this header via a splitter to use Gigabyte rgb fusion app? if yes i need to connect fans to the system fan header also right? (i'm using cooler master masterbox mb500 it comes with three preinstalled rgb fans and a rgb controller, but i want to use fusion app instead of that rgb controller). Do i have to buy anything else?
I personally haven't used the Coolermaster mb500 with the RGB fans but as long as they have an RGB header that can plug in it should work. you don't need to specifically plug the fans into the motherboard for power but if you want RGB control via the motherboard you will need to plug the RGB header into the motherboard
@@CPUmodder But if i put fans to motherboard for power i can control fan speed via bios, otherwise if i connect fans to smps(power supply) the fan will always spin at 100% right? Also i was little confused if RGB LED strip header is same as normal RGB header and if it is safe to put fan's rgb connector to this header.
I can’t find the other fan header please help
1 at the top next to the ram slot and another left of the bottom socket mount
Does this support Athlon 200GE?
As long as it's am4
Yes, I'm using the same motherboard with a 200GE. Just make sure you're running on a new(latest) BIOS.
Just bought this motherboard and I'm confused as to which the fan headers are and which the CPU header is as there's one called LED_CPU and one called CPU_FAN which im assuming is the cpu one however i can't see this on the MOBO. I got this off the gigabyte website. What about the fan headers? Gigabyte says there's 2 yet on of them is supposedly called CPU_Fan and the other is call sys_fan if i remember correctly. Can anyone help me out?
From memory CPU led was not for fans whereas cpu_fan is for the CPU cooler yep there are 2 headers one for the CPU cooler and one for the system fan
Can it support 3200 mhz memory?
pcpartpicker labels it as compatible with up to 3200 mhz so according to them you are good
I'm new at this idk if it's been asked but can i use the Ryzen 7 2700x with this motherboard?
Yes you can, I have the Ryzen 7 2700x paired with this motherboard and 16gb 3000mhz Corsair ram and it works beautifully