You are awesome, great information great presentations. Would you consider a slider door adjustment video.? Mine slides rougher than some. I've made adjustments, but with no real logic. Thanks mucho.
If you are planning on selling merchandise, please consider the button down shop shirt with your logo over the pocket! A breathable shop shirt is much better than a t shirt. Great videos! Been looking for a Promaster for a few months. Thanks for the advice on what to look out for.
Regarding the side to side adjuster. I found when replacing my assy, the adjuster stressed the other bolts enough to break the plastic bracket at the bolt. I turned the adjuster to make all the bolts stress free. So, my adjuster is used to provide stress free mounting. Will, when time permits, re-examine the fit & adjustment assy principle. Just be careful.
I probably should have made that more clear in the video - it's a sort of a tripod arrangement between the three bolts. Luckily, most vans don't need the horiz adjustment, but almost every van needs the vert adjust.
There is an adjuster for up and down. It is on the back side. One side is easier than the other because you crawl under and see it. The other side is accessed by removing a cover in the wheel well right in front of the tire.
Have a question Mr promaster. Do u know what the small silver button that is placed on the inside left hand side of sliding door? About 14 inches off the floor. Thx in advance..KJC
Great content once again. I've made some adjustments to my headlights and I can't figure out why the high beams seem to shine lower than the low beams. The adjustments changes the aim on both low and high beams at the same time. Is there an adjustment only for the high beams?
To the best of my knowledge, the high and low beams don't aim independantly. But it's pretty complicated in there, and it's possible there's an adjustment for that. Unknown.
I need help with my 2018 ProMaster 2500 Man the electrical issues are driving me insane and bankrupt. I will drive the 4-5ish hours to you from Hamilton county Ohio
Literally just replaced a headlight yesterday (for the 20th damn time!) and thought “I should watch a video about aiming these because they’re way off”
Another great video Kip!Thanks!
Thanks 👌 😊 💪 💪 💪
You are awesome, great information great presentations. Would you consider a slider door adjustment video.? Mine slides rougher than some. I've made adjustments, but with no real logic. Thanks mucho.
It’s on the list of videos to make.
Thanks i needed this information
super thanks Kip
Hey, you just did this for me and they actually point at the road now...COOL!!
If you are planning on selling merchandise, please consider the button down shop shirt with your logo over the pocket! A breathable shop shirt is much better than a t shirt. Great videos! Been looking for a Promaster for a few months. Thanks for the advice on what to look out for.
Search my videos for the word assess, and you’ll find a good one for assessing used vans.
Well Gotta Damn Thanks!
Regarding the side to side adjuster. I found when replacing my assy, the adjuster stressed the other bolts enough to break the plastic bracket at the bolt. I turned the adjuster to make all the bolts stress free.
So, my adjuster is used to provide stress free mounting.
Will, when time permits, re-examine the fit & adjustment assy principle. Just be careful.
I probably should have made that more clear in the video - it's a sort of a tripod arrangement between the three bolts. Luckily, most vans don't need the horiz adjustment, but almost every van needs the vert adjust.
We have driving lights (factory) on our van. Got any info on how to adjust those?
I do not. Never tried to adjust them. Unknown.
There is an adjuster for up and down. It is on the back side. One side is easier than the other because you crawl under and see it. The other side is accessed by removing a cover in the wheel well right in front of the tire.
Have a question Mr promaster.
Do u know what the small silver button that is placed on the inside left hand side of sliding door? About 14 inches off the floor.
Thx in advance..KJC
@@keithjohnson1930 yes. That’s the door open/close sensor. Mates to a plate on the body side, pushes in a button.
Thanks, unrelated are you see many electrical issues on 2023-2024 models??
No. The 22-up vans appear to be more robust.!
Great content once again. I've made some adjustments to my headlights and I can't figure out why the high beams seem to shine lower than the low beams. The adjustments changes the aim on both low and high beams at the same time. Is there an adjustment only for the high beams?
To the best of my knowledge, the high and low beams don't aim independantly. But it's pretty complicated in there, and it's possible there's an adjustment for that. Unknown.
I need help with my 2018 ProMaster 2500 Man the electrical issues are driving me insane and bankrupt.
I will drive the 4-5ish hours to you from Hamilton county Ohio
@@serenesoulvibes- not taking any new work till january. Email me promastersonly@gmail.com
Omg thank you again 🙏
thanks
Hope the 🥔🥔🥔diet is still working. Looking good.💪
Working well, and thanks!
Literally just replaced a headlight yesterday (for the 20th damn time!) and thought “I should watch a video about aiming these because they’re way off”
Nice.