Fixing SD Card Slot on Canon EOS 550D / Rebel T2i (no card in camera issue)
ฝัง
- เผยแพร่เมื่อ 23 ส.ค. 2024
- Canon 550D /Rebel T2i SD slot Repair.
If you have a faulty SD Card slot/PCB in your Canon 550D /Rebel T2i
This video may help you on how to solve it!
Any questions fell free to ask!
Greatings!
ps: I own the rights of the song of this video!
thanks
![[TH] 2024 PMSL SEA W2D3 | Fall | ถ้าเล่นไม่ดี ไปแก้ตัววันเสาร์](http://i.ytimg.com/vi/CTmci32hvP8/mqdefault.jpg)
Hmmmm...I was hoping for a solution without taking the camera apart because if I disassembled the camera, the memory card issue would be the least of my problems. Good video though.
Excellent video - Fortunately your demonstration led me to take a closer look inside of the SD card slot and I was able to remove a small bit of plastic that had broken off of an SD card - I used a nylon cable tie as a tool as it is not likely to damage sensitive parts. I did NOT take the camera apart.
Thanks for the help in getting my camera back in working order
dave
This could be a worthwhile video if only you slowed it down and explained what you did - I still have no idea what you did.
+Stewart Scott
As i said, any question, just ask....
basically, i removed a piece of plastic from a Sd card, put an bendend pin straight and cleaned the slot!
that was enought!
;)
+Rui Bento Alves thanks for replying - I would really like to fix mine but I am too frightened to attempt it myself. Could you quote me to fix mine?
+Stewart Scott
"Could you quote me to fix mine?"
hm? sorry... i didnt understand the meaning! Can you explain me better? (im Portuguese! :) )
However, do you know already what is the isseue with your camera?
Wich model is?
Camera says: "no card in camera?
Theres a warped pin or broken?
cheers
+Rui Bento Alves The SD card got condensation on it, I was up a mountain and the sudden change in weather and pressure on way down caused error message say unable to read card. When I removed the card I noticed that the pins were wet. Its not worked since. It will switch on when I have a full battery in but seems to shorts it out very quickly. No other formatted cards have worked. Its a 500D I really love that camera it was my first DSLR. A quote is a price for you to have a go and fix it for me and I pay you for your time.
Hi there!
I would be pleased to fix the camera for you! However, im from Portugal.... i dont think that the shiping coast would be a good deal!
If you saw that the pins were wet, it seems that its the origin of all issues of the camera.
You need to open the camera and clean all circuit boards, conections and contacts!
It looks that during the water/fog exposer, in some parts of the eletronics ocurred a "chemical deposit" between some contacts causing short circuit and bad conections!
Do not try to turn on the camera again! Remove the battery also!
Does the others parts of the camera worked? Display, flash, shutter, etc?
If so, its most likely that, after the cleaning of the PCB´s the camera will work fine! :)
An cell phone/electronic technician should be able to performe the cleaning!
If you need any help, let me know!
greetings!
Thank your for this post! I had this exact problem and your video was just what I needed! I looked inside my card slot and sure enough....there was a chip from a memory card! I removed it and the problem was instantly solved!
Hi there!
I'm really glad that my video was helpful for you!
☺️
Best regards
Rui Bento Alves It made my night! I was so, so happy to get my camera working again!
Excelente vídeo. Minha T5 não tê cartão. Vou verificar se tem alguma sujeira no slot.
Why is it sped up so you cant see how it done. Not very helpfull
Thanks for the video. I'll probably take mine apart today sometime. Hopefully it's the same issue. What did you use to clean it? I saw a brush and a canister with compressed air but it looked like you used something else.
+Ricardo Reillo Most likely he used an electronic cleaner like electrical contact cleaner
+SethsPhone
Hello mate
basically, i removed a piece of plastic from a Sd card, put an warped pin straight and cleaned the slot!
that was enough!
And thanks also for helping Ceci Farías!!
:)
cheers
Obrigado para postar vídeos sobre arrumar câmeras.
Não acha que o pedacinho teria saído da misma forma sem abrir a câmera aspirando o slot? Também pelo video ser muito no alto não entendi o que tu diz com o dremel, lixou o óxido dos contatos/pins?
Amazing! I've never saw how it looks on the inside.
Maybe it's just an utopia but... how impossible would be to replace a card slot board for a faster one? Or how make it faster...
Samuel Cabral Hi there,
Im not shure if changing only the SD slot board would improve!
Theres also the buffering, the internal camera memory, and, of cours, the speed of the card!
But, nevertheless, hat a nice point!
best regards
Hi and thank you for your effort and sharing :) I have the same problem, after I accidently put the card in the active camera, switch was on. Since you are the expert, would you like to buy my camera?
You didn't show us how to repair or fix it which components should be pressed back or damaged
This video was helpful, i have a T2I and it stopped turning on, the little switch when you slide in the sd cover (not shut, but first shut cover, and then slide the cover in place seating it for shooting, the plastic tooth engages the switch) and there is an issue at this point. I'm thinking that bypassing the switch (close the connection so that camera always believes the sd cover is seated correctly see th-cam.com/video/yYlQaxk-fv0/w-d-xo.htmlm49s ) would be a good enough fix for me. There are three power switches on the camera that I know of, the battery cover, the on and off switch on top, and then the sd cover too, perhaps another at the lens? Anyhow, may try to blow out that little switch area, or have to do something similar to what you did.
Obrigado por compartilhar Rui. Tive um problema porém ao abrir a minha, acabei espanando a cabeça de dois parafusos. Existe alguma forma de removê-los? Levei na assistência da Canon e eles querem 650 reais só pra remover os pedaços de cartão do compartimento.
Muito obrigado novamente.
Viva,
pode me enviar uma foto com os parafusos estragados?
This has to be what is wrong with mine. It only reads my damaged SD but the new ones not at all.
thanx.
very useful video.
On my 6d sometimes error pop up that write protection on sd card in on. i gave it to service center but they said that pcb needs to be changed and the cost is it. is it really a problem on the pcb or is it better to change just the sd card slot from a local (unauthorised) service center
Hello! I hope you can help me. I have a Canon T5. It won't turn on unless I take off the sd card. Do you have any idea of what couldbe the problem?
did you tryed with another card? same issue?
+Ceci Farías I have the same problem, if you look inside the slot you may notice pins are touching each other or broken
+Rui Bento Alves I've tried with several sd cards. None worked
+SethsPhone I'll check the pins. What if they're broken?
+Ceci Farías you have to send it out to be replaced or give it to a talented friend to repair
Do you have an idea where I can buy a replacement part for this?
Hello sir,
I have same problem. Where did I get this sd card slot and how much it costs?
Hi there!
You can buy it at Ebay from China:
www.ebay.com/itm/For-Canon-EOS-550D-SD-Memory-Card-Slot-PCB-Board-sd-Cards-Reader-Boards/154027353605?hash=item23dcbee605:g:SV4AAOSwtYlfI1m8
Use that link or search for " Canon 550d sd card slot pcb"
It coast around 15€.
Good luck!
:)
hi bro i have canon 1300D but my memory card is going inside the slot it will go upto 80% and remaining 20% outside y whats the problem
I needn't say what plenty of others have commented as far as the negative comments go, besides the fact that the lighting also sucks.
what if the plastic came out and it still doesn't detect it?
I try to formatting my SD card 4GB SanDisk Extreme III... but my camera not formatting ... when I press ok to format then the camera freeze and nothing happen, doesn't matter if I put it on or off ... still shows formatting and nothing happen, if I don't take out the battery then it holds like that til the battery is out of energy (I try a whole night without anything happens) ... haven't had any problems before, this happens when I move over the pictures to the computer ... I have tried to format it on the computer in all different formats ... but nothing works ... how to do?
Canon EOS 450D
Later finds out it’s just the damn sd card
maybe it he would have tip the camera over and tapped the corner of the camera the piece that was broken off would have fell out and card would have probly read again, just my thoughts.
i hav canon 80D it has problem going to power off again and again
but whn pressed on SD card locker is automatically get on
why it is like tht how to fix it.
canon 80D?? Its a very recent model!
It is still in waranty??
You should go where you bought and they have to fix that for free. (if you did have not messed the SD slot on porpouse)
Any question fell free to ask!
best regards
thank u for ur valuable reply
i didnt done anything to slot but 2-3 times i hav opened sd card to copy the images thats it
but why it is behaving i dont know
I think i broke the spring what should I do? The SD card won't pop out
Hi there.
I just tried now with a tweezers and the Sd card came out!
So, with a small tweezers, very gentile, pull the Card!
Hope that can be helpfull!
Ich habe einen defekten Card Slot bei einer Canon EOS 100D. Da sind viele Pins verbogen. Kann ich die genauso reparieren
Hallo
Yes, i think you can also repair as the same way i did! Be gentil when you put the pins straight again!
greetings
I have this issue every time after i took 2 pictures
well i have canon 40 D its not turning on idk from what but just nothing any help ,link or ...
hi
well, with just that info i cannot be musy helpfull;
did you try a diferent battery?
Are the camera and batery contacts clean?
mn
I fixed it it was the door sensor thx guys
What is that Spray thing that you put?
WD 40
Bhi bnwane ka kitna lega
this is the best pro video in the planet. thanks for sharing, had a same problem.
+Honey Pearl Pelaez
thanks
:)
Hey what screwdriver do you need?
hi, i used a phillips crosshead screwdriver.
Cant say the exact size because the ink is already missing from the screwdriver, but the head is 3-4 mm diameter.
hope that´s helpfull
thanks!
I have a t5i, and one of the pins is bent to shit.. The sd card holder is mounted onto the main board. Is it possible to remove the sd card slot and replace only? Or does the whole board need to be replaced?
Hi there
I just made a small search at ebay and you can buy from China only the sd card slot only for (more or less) 20USD!
Therefore i think that's its possible!
Any question more, feel free to ask!
Cheers
Best luck!
check the link below
www.ebay.com/itm/NEW-SD-Memory-Card-Slot-For-CANON-EOS-700D-EOS-Kiss-X7i-Rebel-T5i-Digital-Camera-/172053912695?hash=item280f365c77:g:~PQAAOSwGotWjhBy
What
What if i broke the pin on my sd card reader? :(
Hi,
I think the best is replycing by a new SD Card Slot pcb
best regards
I cry haha. :P Thanks mate
lol not for the faint of heart
are u serious now?
As if this is gonna show anyone how to do it?!
No idea at all what just happened. I'm guessing you don't want to reveal your skill or secret ? No help to us at all unfortunately
Hi, sorry for delay replay!
Im happy to help you with any question or issues that you have.
I did not know exacly what was the problem. Therefore, i open the camera and check for issues. i found a piece of plastic from and SD card and pull up all the connector for better connection...
well it solved the problem! :)
Also, for 30$ you can buy at Ebay an New SD Slot Board. if you put a new it will probably solve your problem.
Any question fell free to ask!
best regards
Shit like if it's so easy to do that
+Alfredo Garcia
Is not that dificult as well!
:)
Bored 🥱
terrible . Too fast. No dialogue explaining etc. Why bother?
Very disappointed video