Love it I've the same exact set up installed on my 06 Sierra 1500 crew cab., Added a Flow master 71419 muffler added a 2800 to a 3000 stall n 410s with posi rear end she halls ass. Gonna try to have a Super charger hopefully by February lord's willing, nice truck u got there
Lol this what a real cam sounds like!👍 my town is full of takuaches and they all have nice trucks I'll give them that they look beautiful but they r all running ghost cams! I dont know 100% but I'm abt 80% sure they all do lol. I had a straight piped trailblazer cut all the way to the headers (ear rapy type loud) but super slow bc no back pressure at all but it was still keeping up with all these choppy v8s lmao🤣 they chop like a monster but all that noise means nothing when ur v8 cant gap a with a i6 with no exhaust cats or anything💀
Honestly, this was the first cam setup I did. I was “young and stupid” lol. Truck has a tick stage 2 setup in it now. Way more noticeable power all around the power curve. The stage 4 is just a super choppy cam with no real noticeable gains in my opinion. I’ll post a video here soon with the new setup
@@de_hortapbr9494 You are one of the lucky few my friend. I tinted my front side windows and got pulled over in the third day cops dont like people with moded trucks here were I live.
Trans temp will only differ if you run higher stall converter. I've had the stage 4 cam in my yukon with the stock stall and it was fine unless you needed to stomp on the gas.
@@nickboosted1807 gotcha. I just don't want to wait until my engine fails to do the swap. And I'd like to take a stab at it myself. I've heard of that kit though
@@kodybryantmusic7357 better to do it now than later lol. I’ve heard the lifters are prone to fail at some point in those trucks. It’ll cost a little bit to do it but in the end it’ll last longer and you’ll get a little bit of power out of it
3/8 drop with djm springs in front and flip kit with shackles in back 5.3 stock bottom end Btr stage 4 cam with springs Ls7 lifters ls2 trays Trunion upgrade kit Victor jr manifold with 102mm throttle body 36lb injectors
I’m about to get a stage 1 btr cam put in my truck because I don’t have the money to put the stall because I’m 16 but my truck is a stock 5.3 with long tube headers no cars straight pipes to a borla muffler not sure which one it is and straight piped all the way out the back and a k&n so I’m hoping it’s gonna sound pretty good
![30 ชั่วโมงคนเดียว บนรถไฟชั้น 3 โซเวียต [Around The World Ep. 2]](http://i.ytimg.com/vi/MlE9boAVqDA/mqdefault.jpg)
That's a beautiful sound
Sounds so good! What’s the exhaust setup and the headers?
Sounds like horses running sounds awesome👍👍
🤟🏼
Loping and galloping
@@zynnertime1 yep
You must be Partially deaf
@@nickboosted1807 what’s your exhaust setup I have the same truck and I can’t find any type of exhaust system that sounds like that anywhere
Love it I've the same exact set up installed on my 06 Sierra 1500 crew cab., Added a Flow master 71419 muffler added a 2800 to a 3000 stall n 410s with posi rear end she halls ass. Gonna try to have a Super charger hopefully by February lord's willing, nice truck u got there
Did you get your set up like you wanted? People want to know dude!
This is how I would love to build a extended cab or crewcab simple and clean
She choppin! Bad ass brother
Damn sounds real good 👍🏼
Got a nice chop going on there
I never cared for these, I like yours a lot!
You should get some weld wheels
Texas trucks really are the best...
Damn right😂
What makes them different from cammed trucks everywhere else though? 😂 flooded where I live since 88 with'em lol,OBS to NBS.
@@Gorealaracer38 obviously nothing is different. They just have an aura of being tougher/meaner.
That thing doesn't run, I gallops.
Best comment ever.
any other upgrades done to vehicle ?
Sounds clean af !!
Got the sameone on my tahoe..!!💯👌🏽🤘🏽
What kind is it called or could u send me the link
What headers you got? Sounds good asf
What’s everything you have done to motor or is it just the cam?
Awesome ride. What else is done to it?
What you’re using as a exhaust ?
Sounds great!!What exhaust are you running ?
Darude sandstorm
Lol this what a real cam sounds like!👍 my town is full of takuaches and they all have nice trucks I'll give them that they look beautiful but they r all running ghost cams! I dont know 100% but I'm abt 80% sure they all do lol. I had a straight piped trailblazer cut all the way to the headers (ear rapy type loud) but super slow bc no back pressure at all but it was still keeping up with all these choppy v8s lmao🤣 they chop like a monster but all that noise means nothing when ur v8 cant gap a with a i6 with no exhaust cats or anything💀
now sounds amazing partner
Ahhh yes, happy America noises🇺🇲🇺🇲🇺🇲
Damn. Sounds awesome.
Don’t get me wrong, it sounds mean. But what’s the point of a stage 4 cam on a basically stock truck? You driving around between 6 and 7k rpm?
Honestly, this was the first cam setup I did. I was “young and stupid” lol. Truck has a tick stage 2 setup in it now. Way more noticeable power all around the power curve. The stage 4 is just a super choppy cam with no real noticeable gains in my opinion. I’ll post a video here soon with the new setup
@@nickboosted1807 Good post
Big cams in heavy vehicles go nowhere.
Chop is overrated ,dont mean fast.
Sounds like the typical truck everyone has now
Oh yeah definitely sounds like any other truck on the road nowadays
Coming from somebody with a clapped out Mercedes
What’s the valve lift on this thing it sounds sick 🔥
.553/.553
God damn that’s clean
What exhaust you got on it? Sounds meannn
Props !!!🤙🔥 from Laredo Texas joe "El POCHE"Benavides!!! Wudn't mind driving dat beauty !!!
Sounds really 👍 good
Sounds good 👍 real good 👍
Hey nick which btr stage 4 is this. Is this the btr stage 4 nsr truck cam? Or the btr stage 4 v2 truck cam? What is done to it?
Nice but this would be un drivable in California 😭. I want this
Anything’s possible 😂😂 send it
I just cammed my truck stage 4 carven r set up and I live in Cali
Fr everything illegal in Cali lol
My truck is cammed 5.9 lol no catalytic converter lol and never gotten pulled over 👌🙏..
@@de_hortapbr9494 You are one of the lucky few my friend. I tinted my front side windows and got pulled over in the third day cops dont like people with moded trucks here were I live.
So I'm learning and I guess a stage 4 tunning on a cam idles slower than other stages. I can't stand a fast idle cammed engine.
Nice truck bro
hmm sound nice 👍 but quick question... how does the trans temp look like ?
Temps stay around 130-140. Tru cool 40k with -6an lines feed and return to the trans. If you’re aggressive with it they might see 160-165
A true cool 4K is a beast it's the best trans cooler I've ever owned
Trans temp will only differ if you run higher stall converter. I've had the stage 4 cam in my yukon with the stock stall and it was fine unless you needed to stomp on the gas.
@@speedtv6151 you got videos
@@speedtv6151 well why tf would i get a cam if i wasnt gonna stomp on the gas... Js
I know bigger isn’t always better but how’s this cam been for you bro
Is it straight piped and a 5.3 ?
Who’s your tuner?
It’s it full exhaust And the cam ?
Did you even see the title/description?
Well Thank God we live in Texas
Aye bro what kinda exhaust ?
5.3 or 6.0?
Who did your cam ?
What's the specs on cam, make ? Any head work?
Damn it sounds good
What was this kit worth to do
What tuner do you use?
Hey what transmission tune did you go with
Drop ?
OMG Sounds Insane.
What motor in it ?
Exaughst set up bro ?
is that a 5.3 ?
Sounds like rocks in a blender on cam but sweet sweet sounding in person
5.3?
When you want your neighbors to hate you.
When u don't give a shit what ur neighbors think.
@@lowrider94ss your mom happens to like the neighbors quite a bit
Sounds Bad ass!! What's the mods list on This truck
Stall??
Did you upgrade anything else springs etc...
Springs pushrods lifters everything done the right way
@@nickboosted1807 rocker arms too?
@@LSXPhatal yessir. If you check out my instagram @nick_boosted there’s a whole build timeline shows everything I used
@@nickboosted1807 would this work for a 2001 GMC
@@markyboy214 as I've seen it's compatible with the 01 and up just the 99-00 are different it should fit
What cam
If I got a diff cam, what else would I have to do to delete AFM? 2015 silverado 5.3
I’m not 100% sure on everything you’d need man. I know Texas speed sells the afm/dod delete kit which should have everything you need
@@nickboosted1807 gotcha. I just don't want to wait until my engine fails to do the swap. And I'd like to take a stab at it myself. I've heard of that kit though
@@kodybryantmusic7357 better to do it now than later lol. I’ve heard the lifters are prone to fail at some point in those trucks. It’ll cost a little bit to do it but in the end it’ll last longer and you’ll get a little bit of power out of it
What would you recommend for me to help my performance on my 1998 Chevy Silverado C1500 5.7 v8 all i done to it was put a cold air intake in it
-Bigger throttle body
-Full exhaust
-Tune
-Tires
Cubes,.bolt ons dont really do anything
Is it daily drivable ? and nice truck
Need atleast a 3000 stall for it to be streetable
Used to be my daily, 3200 circle D stall ran great
@@nickboosted1807 how was the gas lol
@@jankycustoms6089 Worse. When you start modding, mpg shouldnt even be a concern. WHen its empty fill er back up
What’s done to it to handle that big of a cam
What’s your setup for lowering and what’s your engine setup
3/8 drop with djm springs in front and flip kit with shackles in back
5.3 stock bottom end
Btr stage 4 cam with springs
Ls7 lifters ls2 trays
Trunion upgrade kit
Victor jr manifold with 102mm throttle body 36lb injectors
What kind trunnion upgrade you got??
@@nickboosted1807 .
Is this a vertex or an ls engine
What spec dose I have on cam chop is it 228 232 or less and what duration you have
I gotta know the cam number for this, what a monster
Nice job
what else did you change to put a sage 4? did you get n after market torque converter or anything else?
You will want an after market torque converter
What exhaust u running bro just cammed mine with the same exact cam but wanna run a good exhaust
It has 1-7/8 headers with 3 inch straight pipe to a carven R
@@nickboosted1807 bet bro are u located in dfw area ?how much hp u pushing what mods on it sounds dope asf
What's the exhaust setup? Sounds mean as hell!
Drop and tire set up?
Sounds Nasty!
What are the cam specs
What size tiers
What size is the cam n it sound beauitful
224/230
.553/.553
109LSA
@@zackdillon8670 So thats stage 4? baby cam
@@gordocarbo for a 4.8 that’s massive. If you go much bigger your gotta start hitting the valves
I’m about to get a stage 1 btr cam put in my truck because I don’t have the money to put the stall because I’m 16 but my truck is a stock 5.3 with long tube headers no cars straight pipes to a borla muffler not sure which one it is and straight piped all the way out the back and a k&n so I’m hoping it’s gonna sound pretty good
you could run a stage two on stock stall I believe. I have a bone stock 5.3 with a flow master super 10 dumped before the axle. loud as hell
Says on the website that stage 3 works with some stock stalls
@@walterplentis3989 yea but if I do it’s gonna creep when your at stoplights so I have decided to go with a stage 2 though
Just save ur $$ an put a stall big difference..
@@masonshelly2197 i have a big cam on my 6.2. Check the video out
Where did you get the cam at?
I WISH I CAN HAVE THAT IN CALIFORNIA
What’s the exhaust setup? Is it true duals with no cats or is it just a catless y pipe out the back?
Gah damn that thing sounds pissed!
What are your cam specs
Good god that’s nasty! Sounds like mine😉👌
Whats your exhaust set up?
Where u order it from
What exhaust???
What is your exhaust setup
What exhaust set up do you have
Be honest how's the gas mileage after that cam
Man's been real quiet since this one 😭🤣
What cam I'm looking to cam my 01 5.3 vortec I think it's non LS idk how to tell
Chop monster or stage 4 for my l83 btw adding turbo to it
Those aren’t necessarily the best cams for boost. I’d look into BTR turbo series cams
Can you Please send me the supporting mods for this cam
See what that plate says Texas the greatest state of all
Omg sounds sooooooo gooooood
What’s ur exhaust set up bro?
sorry for the late reply. its 1 7/8 longtubes to 3 inch pipe to a carven R
Is it still alive
what RPM do you have idle at
I believe it was right around 950 I don’t remember exactly. Trucks getting a new built motor
What are the specs to this cam
What you running for exhaust ? I have the same cam
When you install did you tune it ?
@@catalinosolorzano7054 yes
@@catalinosolorzano7054 well I had someone tune it, but yes it was tuned