Now i know how NOT to do my exhaust. Thank you for the video. Way louder than i was expecting and the exhaust note sounds like a tractor with a lope. Each to their own.
That drive by and highway pull sounds wicked! I drive a Ford truck now but the second car I owned way back in the day was a 92 anniversary Camaro Z which ended up being built with heads, LT1 cam from a caprice , long tube headers, true dual exhaust, forged internals, using the TPI intake... spent all my paychecks on a 305ci torque monster totaled by a van while waiting at a stoplight 😩 nothing like a Chevy V8 with some loud 3" pipes though!
Dirtyaznstyle damm that sucks bro I totally know what that feels like because I got rear ended on my blue Silverado sitting at a redlight, thankfully it wasn't totaled
Diego Medrano Man just watched some of your other vids, I miss that sound! I grew up around a lot of older Chevys my uncles used to have fun with. I might have to get a Silverado... a friend of mine blew his turbo LS1 in his z28, swapped it for a 5.3 and boosted that at 18psi going sideways half the time until he had a kid lol
Dirtyaznstyle that's awesome bro, yeah i owned mostly only Chevy trucks, their easy to gain power and to work on, my homeboy and I have done a few cam swap in our area so we have a lot of cammed trucks around here, we have a friend here that has a 05 Silverado cammed with a turbo and he spins pretty much non stop lol, I'm also about to do a cam swap on my fiancée 2010 silverado once her warranty expires in about a week lol
+Diego Medrano. i have a 3500 stall I'm going to use so I'm curious to see how it runs. my little 4.8 now still runs hard but it has 260k miles and it's time for a new one.lol well I see you around bro!✌
Nice truck it sounds very good but I was wondering is it possible to get a front of the truck lower than the back I usually see the opposite around Dallas ?
whats the difference in stage 1-4 cams? I have an 08 GMC Sierra with a 5.3 and i want a cam but really dont know what cam kit to get. i dont wana take it to the track i just want some that sounds real mean. but not really loud. some to do a badass burn out with. Truck is blacked out 4"6" drop on 24"s.
Joshua Garcia the bigger the stage number the better and louder the cam it will be since you want something that sounds good but not really that loud I would recommend you to get the stage 3 cam sounds good but not really loud, let me know if you have any other questions or if I even answer your question
Gerardo Barrera-Perez just line up the dots on the camshaft gear and on the crankshaft gear and put it back the same, advancing the timing is done with the tune
Andres Menjivar Jr I bought the cam from Briantooleyracing.com and if you have D.O.D or VVT you can buy the delete kit from texasspeedandperformance.com
Dustin Joel I'm editing a video right now should be up tomorrow or so, it's a video of installing a stall in this red truck and some fun runs at the end. You'll be able to see how the exhaust is set up in this video
Diego Medrano this is almost identical to the setup I'm building, then after the rest of the truck build is broken in I'm going turbo and different cam.
Iden Rodriguez you can get it at www.briantooleyracing.com once your at the website go to categories then to camshaft then to truck cams then click on stage 4 truck cam then at the bottom is gonna be the stage 4 kit, all you need is the cam and the valvesprings, hope this helps bro
Nicholas Rendon sadly this truck has never been to the track but hopefully once it warms up over here we can take it to get some passes and will definitely make a video of it
![ค้างคืนโรงเก็บกระสวยอวกาศร้างกลางทะเลทราย [Around The World Ep. 3]](http://i.ytimg.com/vi/E5bWZQhABJE/mqdefault.jpg)
*Bonus Clip at the end*
Yo man can u give me sum advice
Martin Marquez Yeah , a tuner .
@@ColKlink-yh1ro 😂
Now i know how NOT to do my exhaust. Thank you for the video. Way louder than i was expecting and the exhaust note sounds like a tractor with a lope. Each to their own.
Don’t be a pu $ $ y. Let that mf chop bruh
Your blinker fluid is a little low.
😂😂
lmao hahaha
Funny
a vid of it cold starting and driving and wot with the stock converted awesome truck great job
I finally found this old vid I seen in a diff video sometime ago, 💯
How is the stock converter do with the big if a cam? I like a big ass stall so when I let off the gas it hits a lick while rolling
That drive by and highway pull sounds wicked! I drive a Ford truck now but the second car I owned way back in the day was a 92 anniversary Camaro Z which ended up being built with heads, LT1 cam from a caprice , long tube headers, true dual exhaust, forged internals, using the TPI intake... spent all my paychecks on a 305ci torque monster totaled by a van while waiting at a stoplight 😩 nothing like a Chevy V8 with some loud 3" pipes though!
Dirtyaznstyle damm that sucks bro I totally know what that feels like because I got rear ended on my blue Silverado sitting at a redlight, thankfully it wasn't totaled
Diego Medrano Man just watched some of your other vids, I miss that sound! I grew up around a lot of older Chevys my uncles used to have fun with. I might have to get a Silverado... a friend of mine blew his turbo LS1 in his z28, swapped it for a 5.3 and boosted that at 18psi going sideways half the time until he had a kid lol
Dirtyaznstyle that's awesome bro, yeah i owned mostly only Chevy trucks, their easy to gain power and to work on, my homeboy and I have done a few cam swap in our area so we have a lot of cammed trucks around here, we have a friend here that has a 05 Silverado cammed with a turbo and he spins pretty much non stop lol, I'm also about to do a cam swap on my fiancée 2010 silverado once her warranty expires in about a week lol
im trying to chose mines is it the last one ? stage iv truck cam? or single bolt? sounds sick bro good work !
Jesus Zarco it’s the 3 bolt cam not the single bolt
this cracks me up every video i watch is right here in my own state haha i guess we like our trucks dont we lol
we sure do
Is it running on the stock stall ?
No way
your truck sounds good man, I'm working on a 5.3 swap and was thinking of going stage 4 as well.
RedDevil ent. That's awesome men hope everything goes as plan for you, and stage 4 cam is great in sound and performance
+Diego Medrano. i have a 3500 stall I'm going to use so I'm curious to see how it runs. my little 4.8 now still runs hard but it has 260k miles and it's time for a new one.lol well I see you around bro!✌
lol your homeboy cool as shit. you drop a gear he knows what's next
Lord Mc lol hell yeah the tune help a lot with dropping the gear much better
your neighbors must love you💀
lol they sure do
Starts it at 1:25
Nice truck it sounds very good but I was wondering is it possible to get a front of the truck lower than the back I usually see the opposite around Dallas ?
yes its possible
Damn haha. I'm installing stage 2, headers, exhaust, electronic valve with intake on my 05 5.3 yukon. stoked to have it tuned.
That sounds really good man
Sounds sick af ! 🔥
thank you
Mines a 4.8 Chevy silverado 2004 with long tube headers , no cats , i can be able to put in a stage 4 cam right ?
yessir
Edgar V no, you need a stall converterX
stupid question, but if you swap from a factory cam to a big cam like this, do you have to run higher octane gas?
Jackson Burdette no
What would you recommend for me to help my performance on my 1998 Chevy Silverado C1500 5.7 v8 all i done to it was put a cold air intake in it
What brand headers did he use ? And where they 1 7/8 or 1 3/4?
@speedengineering and I think 17/8
Good shit man , I'm currently in the process of putting the same cam on my truck. Do you have any other videos on the built ?
Gerardo Barrera-Perez I don't bro, but if you have any questions just ask me maybe I can help you
Diego Medrano for sure thanks bro , greatly appreciated
truck sounds good! I got a blue dane, also.
chris barber that's awesome men, I love Danes it's the only breed I have always had as a pet
I think stock they have a 2200 or 2400 stall converter. Depending on how old the converter is I'd just rebuild the stock one.
How to piss off your neighbors 🤣🤣🤣
whats the difference in stage 1-4 cams? I have an 08 GMC Sierra with a 5.3 and i want a cam but really dont know what cam kit to get. i dont wana take it to the track i just want some that sounds real mean. but not really loud. some to do a badass burn out with. Truck is blacked out 4"6" drop on 24"s.
Joshua Garcia the bigger the stage number the better and louder the cam it will be since you want something that sounds good but not really that loud I would recommend you to get the stage 3 cam sounds good but not really loud, let me know if you have any other questions or if I even answer your question
Man balls enabled
now I knowvwhat'll get me pulled over dam that's loud
Hows the thing run
5.3 or 6.0?
Ima be installing my own cam in my chaparra, thanks to your videos... I’m scared but fuck it let’s see what happens 🥵😳
just send it
Pregunta muy importante estas corriendo el convertidor de torque original o lo cambiaste de algún rpm en específico .... gracias por tus videos
es original
@@dinocoblue2709 si es
I know who This Is, you live around the corner from me. I drive the single cab red truck!lol small world
RedDevil ent. Oh yeah I know where you live too, you live by the animal store, it is a small world
Está chida la troca trae buen sonido de muffler y mejor con el cam
Puro Guanajuato Apaseo el grande 🇲🇽🇲🇽
Do you have to advance timing or anything? Or do you do the stock timing ?
Gerardo Barrera-Perez just line up the dots on the camshaft gear and on the crankshaft gear and put it back the same, advancing the timing is done with the tune
Diego Medrano thanks man I appreciate the info !
Do you have links to website were you bought the cam?? Plan on doing the same cam setup
Andres Menjivar Jr I bought the cam from Briantooleyracing.com and if you have D.O.D or VVT you can buy the delete kit from texasspeedandperformance.com
thank you ! so just the camshaft and the delete kit is all installed?
yeah thats right
who did ur tune?? i installed a hot camm snd a 2800stall in my extcab 06 Silverado any reconindation would b appreaciated..
Jason Juarez Texas LSX, j&s performance are good too
Hold up stock converter?
Yes
How does it do on the stock converter
Sounds mean asf bro! Have ya'll gotten pulled over for the loudness?
lol yeah once
Wait what this is Texas never had a problem in east Texas with cops and loud shit lol yall live in Texas and have that problem lol
puro guanajuato fierro alv🔥🔥
Tienen que ser catolicos cuando
hablan de esa forma....
Tru dualed or ypiped?
sounds sick! want to do this to mine! for this did you build trans and rear?
Catarino Torres cool bro, and no trans is still stock and rear end already had 4:10 gears
What cam do you recommend for a 2013 Silverado with the 4.8? The stage 3 or 4 truck cam?
I wanna do the same setup on my truck stock 5.3 03 will it be good if I get all that done with the tune & stall?
Andy Deloera yeah that would be the best way this do it
Dinoco Blue Garage cool bro thanks
Dinoco Blue Garage would I have to remove the cats?
Sounds fucking great
Curious as to how the exhaust setup looks on this?
Dustin Joel I'm editing a video right now should be up tomorrow or so, it's a video of installing a stall in this red truck and some fun runs at the end. You'll be able to see how the exhaust is set up in this video
Diego Medrano I appreciate it! Thank you for the fast response!
Dustin Joel your welcome bro
Would you recommend paying someone to do this. Im also thing of doing glasspacks custom dual exhaust.
What cam brand
Did you change the timing chain and oil pump?
Clean ass truck wey I got a 2005 Chevy I can’t wait to fix it
thanks bro
What kind exhaust is that sounds sick bro .
Lee Etienne it's just 3" pipe all the way, no muffler just straight pipe
Do you have a Y-pipe setup or are you running true duals?
Jaime Huff true duals with no x or y pipe
Outkast Racing Why don't purchase one for him since you're ballin.
Do you have cats or no cats?
Is this truck 4.8 or 5.3
5.3
How often u get pulled over? Pretty loud I have btr stage 4 ls7 internals long tubes tune on 93 etc had to put a muffler on tho got fucked with by 5 0
Colton Guadarrama surprisingly I haven't gotten pulled over due to the exhaust, maybe it's where your located
what size were your tires
What lifters did you run?
Stocks
@@dinocoblue2709 and you never had problems with the stock ones?
Are you running flat tops?
How does the truck run with stock converter
pretty good actually
How does it perform with stock converter?
ThePantherLB it performed very good no issues,
Diego Medrano ever have it on a track? What kind of times you running?
Witch one should I get I have the save truck with a 4.8 ? Stage4 can ir the stage 4 single bolt cam
the stage 4 truck cam kit not the single bolt
Dinoco Blue thanks brother
Sicc af bro
Link for cam? Clean truck btw🔥🔥🤤
does it try to push through the stock convertor?
Joseph Pitt not that I have noticed
Diego Medrano thank you just curious on doing this swap as well
Joseph Pitt what cam you plan on installing?
btr stage 4
Diego Medrano do you think this cam would like some boost? I plan on going turbo later jus don't wanna change the cam twice
Badass 🤘
I now right 😔😪
people lets not forget, louder doesnt mean faster. i bet a 212/216 stage 2 would beat anything over 220 across the board until after 5500rpms
So the lower the cam stage the better performance wise ?
…according to dyno results they make extremely similar numbers down low. 🤙🏽
is that with a stall converter?
Nicholas Rendon no still with stock converter
What kind of dyno numbers? Sounds boss.
Richard Charlton it's never been on the dyno so it's unknown
Diego Medrano this is almost identical to the setup I'm building, then after the rest of the truck build is broken in I'm going turbo and different cam.
Richard Charlton damm that's badass bro, that what I want to do hopefully one day go turbo
Diego Medrano yeah same motor combo NA though, my motor build is getting tucked into a 70 C10 long bed.
Richard Charlton hell yeah that's badass, I'm trying to save up to buy a cheap c10 and do a ls swap
man that thing sounds good. nice and choppy.
william hobza thanks man
Diego Medrano how much horsepower did you get out of it
Revs it's never been on the dyno so the hp is unknown but I would guess around 380 or 390
okay thankyou
How’d you get it to pass inspection? 👀
Just like regular it doesn’t have a check engine light
Don't live in Nazi run California
Hp tuners
Do you need a new trans when you put a cam
no sir
wat all do you have to change to put the stage four cam
Michael Turner just the cam and the valve spring that's it
thanks does it do ok with the stock torque converter.....sounds damn good
Michael Turner sorry for the late reply but yes it drives fine nothing out of normal
Im new to the 5.3 motor. I got a 2000 chevy tahoe that i would love to do a cam swap, what brand cam do you have?
Btr stage 4 cam
What’s a good cam spec for a lq9 6.0 if I want it to gain a lot of power
The btr stage 4 truck cam will be a beast that’s what I’m running on mine..with a few more goodies and I’m a little over 500 to the wheels..
are the valve springs still stock???
Jorge Vazquez no I believe they are ls6 valve spring
Diego Medrano bet bro thanks
What power did you gain from the cam?
Clown Pound not exactly sure kus it's never been on a dyno but I would say 60-70hp
What kind of drop does he have
5/7 belltech
what do you have done to the trans?
Eulises ordunez nothing the trans is all stock
Saving up for built 4l80e those things are fuckin awesome 60/70s eh. I hate the drop between gears :( 4:10 keep it movin🤙
No tendra el numero de parte de ese kit cam y springs?
How much was just the exhaust system?
not sure
Hey bro where you get those set of headlights looks bad ass
Sergio Gonzalez eBay clear headlights
Yup looks bad ass
What the brand of those headers
What it do on the dyno?
Bryan Gutierrez it hasn't been on the dyno yet
Outkast Racing bro if all your gonna do is hate and just say shut you dont even know, just go find another channel to hate on.
Outkast Racing mines put down 296 hp / 326 torque on a 4.8 with no stall & no gears or possi
What are the specs for this cam
What push rods are you running?
blown5.3 stock push rods, its a low lift cam that allows you to run stock push rods
I want a cam like ur blue truck I need it for a L's 5.3 2006 were can I get it and what size is it
Iden Rodriguez you can get it at www.briantooleyracing.com once your at the website go to categories then to camshaft then to truck cams then click on stage 4 truck cam then at the bottom is gonna be the stage 4 kit, all you need is the cam and the valvesprings, hope this helps bro
Stock motor?
yessir
@@dinocoblue2709 geezus dude, stage 4 cam? Surely you lost power?
Where you get them gto stickers
Pure guanajuato alv
Pure de guanajuato, o puro guanajuato?
What headers?
jorge_obs PaceSetter's 1 3/4
What heads are on the motor?
862
Dinoco Blue Thanks!
Guanajuato Simon compa.
How much did tx lsx charge you
For that setup
it was a sale they had going on, I think like 1500 for everything
whats the idle set to?
Hernando Aguayo it idles about 1k
One things for sure, you won’t be able to sneak up on your gf cheating on you. She would hear you coming a mile away!
Hey man would 2 and 1/2 inch pipe change sound
just a lil
@@dinocoblue2709 what cam ?
no track times?
Nicholas Rendon sadly this truck has never been to the track but hopefully once it warms up over here we can take it to get some passes and will definitely make a video of it
Are y’all from Fort Worth
Yes sir'
I see you are too, I saw your video
Hell yes my truck is looking like this right now the front end and yea I knew I saw your truck around here I just thought I was trippin
Your neighbors must hate you lmao
yeah but they have no choice lol
Como puedo conseguir las partes para bajar mi troca 2” inch’s que pajina puedo buscar recomendaciones por fas gracias
www.suspensionsuperstore.com
Gracias
Damm this a baddas truck 💦💦💦
Link for cam by any chance bro ?
Rene Gomez III www.briantooleyracing.com/btr-truck-cam-kit-with-your-choice-of-springs-and-camshaft-36516.html
Dinoco Blue Garage thank you sir what pushrods did you go with ?
Rene Gomez III your welcome, and I used my stock pushrods