How does the Rough Country Vertex system ride?
ฝัง
- เผยแพร่เมื่อ 7 ก.ย. 2024
- How well does the Rough Country Vertex coil over system ride?
All truck modifications:
Struts:
www.americantr...
Upper Control Arms:
www.stage3moto...
Closure panel:
www.tascaparts...
Train horns:
hornblasters.c...
Head lights:
www.amazon.com...
Wheel well liners:
www.americantr...
Shocks:
www.roughcount...
Coolant tank cover:
www.americantr...
Emblems and badges: Sunset Retros
Remote start:
www.amazon.com...
Light bar:
www.stage3moto...
Light bar mounting brackets:
www.stage3moto...
Center cover:
www.oemfordpar...
Switches:
www.amazon.com...
Switch wiring connector:
www.amazon.com...
Knob covers:
www.amazon.com...
Headlight knob cover:
www.amazon.com...
Bed tie downs:
www.amazon.com...
Rear seat release: www.amazon.com...
Rock lights:
www.amazon.com...
Throttle response booster:
www.v-p-p.ca/
Exhaust:
www.autohance....
Traction Bars: Custom made
Bed Liner: Line-X
Ring cup holder lighting kit:
www.f150leds.c...
Dash lighting kit:
www.f150leds.c...
Mirrors:
boostautoparts...
Hitch:
genyhitch.com/...
Wheels: Hostile Sprockets 20x12 -44
Tires: Nitto Ridge Grappler 35x12.5
Lift: Rough Country 6 inch suspension lift
Steering wheel vinyl decal overlay:
www.ebay.com/i...
Tuner:
www.stage3moto...
Cold air intake:
www.stage3moto...
Jam Handles:
www.jamhandle....
Third brake light bulbs:
www.f150leds.c...
Tailgate insert letters:
www.amazon.com...
Raptor style grille lighting:
www.stage3moto...
Auto Stop Eliminator:
www.autostopel...
Heads up display:
www.f150leds.c...
Antenna:
www.amazon.com...
Tailgate assist:
www.amazon.com...
License plate lights:
www.amazon.com...
Fog lights:
www.amazon.com...
Thanks for watching another video of Blome Outdoors!
Don't forget to like, comment, and subscribe!
We'll catch ya next time!
Instagram: Blome_Outdoors www.instagram....
Email: Blomeoutdoors@gmail.com
Trucks looking awesome!! I've been amazed at how my truck rides with the vertex coilovers and rear reservoir shocks. I stacked a level on top of mine and went to a little over 9" in front and 6" in rear so now I have to raise the rear another inch. Set mine at 4 and love the stiffness and less roll but I live in Florida where the roads are pretty good.
What lift do you have?
He has the vertex coilovers so he almost definitely has a rough country lift.
My 17 150 is setup same as yours but with the icons uca. Rough country Finally has the upper control arms for f150 4x4. Just got mine today
Bro that a badass truck, I like the clean look simple and clean nice…I think 37s would look nice get open country at3
Drill a small hole or two at the very bottom of the taillight. I had that issue years ago, drilled a couple very small holes, no issues.
Good review I'm looking to 3.5" with the vertex shocks all around because they did a vid on a tacoma build and the stance is perfect.for my Tacoma TRD off-road.
Truck looks great
Love the videos bro keep it up !
Keep the stickers on dude 😂
You need the BDS uppers with a 6 inch lift. I might go with the Vertex with 17's wrapped in Pro Comp 35's. Did you upgrade your brakes?
I have the same truck lift and tires. Just bought the vertex coilovers and I hate the ride. It is soo ruff. I don’t know what is different. I have about 200 miles on the new setup. Brand new nitto 35’s. I’m at a loss.
There’s a break in period. I drove from Florida to Illinois and half way thru I had to reset the settings.
Did your ride get better?
I recently had this exact kit installed on a 2018 F150 4x4 and immediately the rear park sensor came on the dash. I go into settings and it has been unchecked and it wont allow me to check the box. Not that I really need the rear park aid feature, but it also caused a over view picture of a truck to come up on my screen with a red exclamation point. Anyone have any issues or can offer some advice?
Thanks in advance.
Looks Great…I have a similar set up and considering a Vertex system for my truck, just asking what traction bars are you running?
How many miles do you currently have on this suspension? Wondering how long they last thanks!
How much lift are you running? Not including what you have with the tires. Just the suspension. Thanks
If your running the rear shocks on setting 1 do you wish they had the ability to go even softer?
Question for you, I have seen other people with these coilovers installed and I noticed the reservoir hose faces the front side of the truck, meaning it goes under the side of the upper control arm that faces forward, whereas I noticed your hose goes under the back side of the upper control arm. Is there a correct way to install? Do you think this makes a difference?
Can you do a vertext 6inch lift on a 2019 fordf150 2WD only finding the vertext kit for 4WD?
With a spindle lift UCA isn't needed like a strut lift or spacer
How are they offroad? These shocks are for offroad.
Looking at getting the vertex shocks, how much do you like them and how many miles have you drove within them?
I have a 2010 f150 and want to get a RC with lifted struts. One question... do u enjoy the 6" or would u go higher?? I was debating between 6 w/35 or 8 w/37 inch. Do u feel taller on the road with the 6 ??
Good video keep up the work 💪
You can tell you sit higher in a 6 inch lift. You could go with either of those set ups but I personally wouldn’t go any higher than 8 on any 1/2 ton truck, once you go higher than that it doesn’t look good anymore.
The knobs on the reservoir aret the height correct?
No sor that changes the compression. Makes it softer or harder depending on terrain.
AGAIN HOW ARE THET OFFROAD?
What do the settings mean? Is 1 really hard or really soft?
How much is the whole set up including labor…ball park figure pls. Interested Ty I’m from Moyock, NC
Getting mine done in Oklahoma 6-7.5 in lift vertex coil overs up front and HD tie rods ends plus alignment and coil over height adjustment right at $2200 before tax then I added rear traction bars for 400$ more
There’s absolutely no difference with the upper control arms…it’s an unnecessary mod, only for looks unless you’re Baja racing
Will you continue to upgrade the interior? I have the same interior on my STX and hate it lol
That’s the plan but parts are taking forever to ship
upper control arms have nothing to do with ride quality.
That’s just simply not true man…
@@texanerection492 the angle of them do, how they are built has absolutely nothing to do with it
What psi do u run ur tires in the summer?
You ever tried them on 8 the stiffest how does that ride?
Yeah I have, they’re super stiff, it feels like you’re riding on the leaf springs with no shocks on the truck at all 😂
@@blomeoutdoors2134 for a first timer what 6” lift would you recommend and what size wheel and tires for a 2016 f-150
How do they perform off-road?
On some trails, washboard roads, gravel, etc.
I’m having a hard time deciding on what to purchase. Currently have the RC 6” lift with the N3 shocks and struts.
Debating on trying the fox 2.0 in the rear or the vertex shocks. Any info you have would be great!
Hey man, end up making a decision? I’m not lifted, but thinking about leveling my Tundra. I’m genuinely thinking about the vertex, but there aren’t many in-depth videos about them.
@@texanerection492 hey bro! I did end up buying them! They’re doing great! I got about 4,000 miles on them. The fact that you can soften or stiffen the ride is a huge deal. I switch over to 6-8 when going off road and also when towing. I think they’re worth the money.
@@alanramos7464 damn man, I was subconsciously hoping you wouldn’t say that👀. I’d be 100% down to buy them, but there’s a good chance I’ll be out of country for a long while. I’d hate to spend a whole bunch of money on this shit to only get to drive it for 15 months… Have any experience with other struts/coil-overs? I saw that you mentioned the N3’s- trying to avoid those haha.
Your rear wheels dont look centered
Dude are you forserious that was a waste of time! Do you ever stop talking? Pete and Repeat were walking down the street and Pete fell down who was left??
😂xtra 200 dlls and u woukd of had fox