Nice. Amen on proper maintenance. I started out with airguns for less lethal defense but the plinking with various projectiles has really become a lot of fun. I recently tested some BBs at high power in my TCP shooting 30 at a time.
@@RWMAirgunsmithing Well it wasn't optimal the way I packaged them in plastic wrap. They fired mostly as a wad but I have plans for how to optimize. My goal was to get a big spread sort of like birdshot! The video of my pilot test is posted on my channel: th-cam.com/video/e5_OlYqGyiw/w-d-xo.html
Where do I buy the bushmaster barrel and what type of barrel is it or if you could send me the link to see if I can buy it in advance, thank you very much
If you mean that short suppressor, it doesn't really have a brand, it's a "JBU M4 KURZ suppressor" airsoft replica. Make sure you include airsoft shops in your searches, you will find all the mil sim parts. Edit : the inner barrel is the stock bushmaster barrel, i just cut 5/8" off to fit flush with the suppressor... fyi.
Tested.. the 4" plates can't handle it (classic bb ricochet hasard). The 10" plates from the crosman pellet trap angled at 35-40° can take a full mag like a champ no ricochet.
@@johnnybbgunner2136 Me too hehe, I want to test out more brands of bb's also seeing as the 1077 barrel has a bigger diameter. Lots of information to be collected xD
@@johnnybbgunner2136 I am betting the extra 5" compensates for the bigger bore diameter... so equal fps but slightly better ballistics from the extra 5". I am going to make a part 2 magazine video since the awesomeness of the M4A1 made me realize my mags from 2018 must be dirty AF!!! xD I can almost tell when the valve moves between co2.
I have the DPMS SBR, completely stock mechanically, and over my chronograph it shoots at 480fps for the first few shots with full CO2's, at about 70deg F. After the first mag is emptied, it shoots around 440fps on the second mag and then slowly drops in the mid-300's after about five mags, before going empty. So it's not bad for power, it has good power for a short range weapon, and of course the guns like these are extremely fun, especially in full auto mode. But full auto mode really freezes the C02's quickly and it's good to let it sit a few minutes and warm back up after dumping a mag on full auto.
In England we're only allowed a semi automatic version of this rifle although the change lever does state full auto. Do you have a workaround to modify the UK version to full auto?
Finally got around to swapping my semi-auto fcg from an R1 to my DPMS "sniper" setup. The safety/fire selector is the same on both the semi and full auto models. What changes is the part directly behind the "hammer/sear" that is kinda like a disconnector. Technically you could potentially machine yourself the part and replace it if for some hypothetical reason you were to void your warranty and maybe end up with a prohibited airgun ... but of course we all know that would be wrong ... hehe ;)
The workaround might be to buy a full auto version from somebody in the U.S. and have them ship it to you, discreetly of course. At least that's how we do things in this country. If it's illegal, just find a way around that stupidity. I mean it's just a BB gun!
@@trevorjameson3213 that would definitely be one way, if both parties are mechanically inclined you could take apart the fcg and just ship the "disconnector" and spring. Not sure what the odds of a fully assembled fcg making it in the mail are xD I'm kinda square when it comes to rules and regulations though hehe. I wouldn't try it personally lol. Btw I have a semi auto and a full auto fcg in my lower receiver full breakdown video.
it's the Mags. the only diff. is the US. ver. if you look at the valve the UK. version does not have the flat sides for the co2 to the full auto feature and i've also usre a dremmel to enlarge the ports and use a bigger tube in the Valve to get 600/700 and 800 fps. you'll have to Port and retube the Valve for more power the max. tube Dia. is OD.4mm and for max Power the Inner dia. must be no more than 3MM.
I reached out to Crosman telling them I was disappointed because my A4P came with a unfinished silver buffer tube (reached out a few times actually), last week someone messaged saying they would try to get me a black MPW buffer tube from "Warranty" if possible. Today I was pleasantly surprised to find a MPW buffer tube complete with the M4 type stock and springs in the mailbox.
I already painted my A4P buffer tube black and it seems ok, so maybe now ill remove the buffer tube and that plastic from my DPMS SBR and put the new stock assembly on that.
Wow Nice! Nothing like getting good customer service xD I should try and have them send me a bolt catch assembly lol xD It's kinda weird that they send out the unpainted buffer tubes, considering there is significant wobble with the lower receiver when unpainted. Edit : duude, and you got extra/spare parts!! So jealous lol
@@RWMAirgunsmithing I messaged support@crosman but it was Sally that hooked me up and the email she used was support@velocity-outdoor ..... I been working on these airguns lately and switching things around, you know! and yes some spare parts I have as I'm sure you have LOL I was thinking at some point we should all show our spare parts and maybe do some trade offs.
@@donye_mfkn_east8161 hope my modest videos helped you out xD really love your enthusiasm hehe, these are amazing and super tinker friendly. I'm hoping crosman starts selling parts like they do for most of their long time bestsellers, that would solve so much.. ive only ever had the issues with the bolt catch in my dpms (mentioned in my warning video)
40-60 feet is about the max for best accuracy. Nice job.💪🏻🇺🇸
Thx, love plinking with these guys xD
Nice. Amen on proper maintenance. I started out with airguns for less lethal defense but the plinking with various projectiles has really become a lot of fun. I recently tested some BBs at high power in my TCP shooting 30 at a time.
lol , like a shotgun round? hehe, how did that go!?
@@RWMAirgunsmithing Well it wasn't optimal the way I packaged them in plastic wrap. They fired mostly as a wad but I have plans for how to optimize. My goal was to get a big spread sort of like birdshot! The video of my pilot test is posted on my channel: th-cam.com/video/e5_OlYqGyiw/w-d-xo.html
@@ScaredyCatTactical Nice stuff xD you got some interesting ideas hehe
how do you change the stock of the dpms sbr?
You can't technically change it without a bit of mods. I have a beginner to expert level video out for the dpms
here is the link th-cam.com/video/mL7zXBKktJE/w-d-xo.html
What stock is on that pistol ?
On the bushmaster? It is a king arms brand retractable stock (for airsoft).
Where do I buy the bushmaster barrel and what type of barrel is it or if you could send me the link to see if I can buy it in advance, thank you very much
If you mean that short suppressor, it doesn't really have a brand, it's a "JBU M4 KURZ suppressor" airsoft replica. Make sure you include airsoft shops in your searches, you will find all the mil sim parts.
Edit : the inner barrel is the stock bushmaster barrel, i just cut 5/8" off to fit flush with the suppressor... fyi.
Can you do 3 round bursts on each plate?
Hate to admit I've been neglecting the FA ever since i downloaded a shot timer app definitely gonna test it out now
Tested.. the 4" plates can't handle it (classic bb ricochet hasard).
The 10" plates from the crosman pellet trap angled at 35-40° can take a full mag like a champ no ricochet.
NICE!!😎👍🏻👍🏻
Love these guys, just trying to share xD
Have you ever tested your rifles on a chronograph?
Neg, I want to buy one, its on the list of things to do, just have to do it hehe
The FPS must have gone up some with almost 5” of barrel length gained.
Just curious.
@@johnnybbgunner2136 Me too hehe, I want to test out more brands of bb's also seeing as the 1077 barrel has a bigger diameter. Lots of information to be collected xD
@@johnnybbgunner2136 I am betting the extra 5" compensates for the bigger bore diameter... so equal fps but slightly better ballistics from the extra 5".
I am going to make a part 2 magazine video since the awesomeness of the M4A1 made me realize my mags from 2018 must be dirty AF!!! xD I can almost tell when the valve moves between co2.
I have the DPMS SBR, completely stock mechanically, and over my chronograph it shoots at 480fps for the first few shots with full CO2's, at about 70deg F. After the first mag is emptied, it shoots around 440fps on the second mag and then slowly drops in the mid-300's after about five mags, before going empty. So it's not bad for power, it has good power for a short range weapon, and of course the guns like these are extremely fun, especially in full auto mode. But full auto mode really freezes the C02's quickly and it's good to let it sit a few minutes and warm back up after dumping a mag on full auto.
In England we're only allowed a semi automatic version of this rifle although the change lever does state full auto. Do you have a workaround to modify the UK version to full auto?
Finally got around to swapping my semi-auto fcg from an R1 to my DPMS "sniper" setup. The safety/fire selector is the same on both the semi and full auto models. What changes is the part directly behind the "hammer/sear" that is kinda like a disconnector.
Technically you could potentially machine yourself the part and replace it if for some hypothetical reason you were to void your warranty and maybe end up with a prohibited airgun ... but of course we all know that would be wrong ... hehe ;)
The workaround might be to buy a full auto version from somebody in the U.S. and have them ship it to you, discreetly of course. At least that's how we do things in this country. If it's illegal, just find a way around that stupidity. I mean it's just a BB gun!
@@trevorjameson3213 that would definitely be one way, if both parties are mechanically inclined you could take apart the fcg and just ship the "disconnector" and spring. Not sure what the odds of a fully assembled fcg making it in the mail are xD
I'm kinda square when it comes to rules and regulations though hehe. I wouldn't try it personally lol.
Btw I have a semi auto and a full auto fcg in my lower receiver full breakdown video.
it's the Mags. the only diff. is the US. ver. if you look at the valve the UK. version does not have the flat sides for the co2 to the full auto feature and i've also usre a dremmel to enlarge the ports and use a bigger tube in the Valve
to get 600/700 and 800 fps.
you'll have to Port and retube the Valve for more power the max. tube Dia. is OD.4mm and for max Power the
Inner dia. must be no more than 3MM.
@@joseglenn20 negative, the semi auto/ full auto firing options are 100% determined by the FCG.
There's absolutely no point in any of these rwm videos. USELESS !
I reached out to Crosman telling them I was disappointed because my A4P came with a unfinished silver buffer tube (reached out a few times actually), last week someone messaged saying they would try to get me a black MPW buffer tube from "Warranty" if possible. Today I was pleasantly surprised to find a MPW buffer tube complete with the M4 type stock and springs in the mailbox.
I already painted my A4P buffer tube black and it seems ok, so maybe now ill remove the buffer tube and that plastic from my DPMS SBR and put the new stock assembly on that.
Wow Nice! Nothing like getting good customer service xD I should try and have them send me a bolt catch assembly lol xD
It's kinda weird that they send out the unpainted buffer tubes, considering there is significant wobble with the lower receiver when unpainted.
Edit : duude, and you got extra/spare parts!! So jealous lol
@@RWMAirgunsmithing I messaged support@crosman but it was Sally that hooked me up and the email she used was support@velocity-outdoor ..... I been working on these airguns lately and switching things around, you know! and yes some spare parts I have as I'm sure you have LOL I was thinking at some point we should all show our spare parts and maybe do some trade offs.
@@donye_mfkn_east8161 hope my modest videos helped you out xD really love your enthusiasm hehe, these are amazing and super tinker friendly.
I'm hoping crosman starts selling parts like they do for most of their long time bestsellers, that would solve so much.. ive only ever had the issues with the bolt catch in my dpms (mentioned in my warning video)