You adhere the license plate light to back of license plate. Route wire to the inside of the bike either through a hole that you drill through subtray, or around and up the subtray. Then connect like shown in the license plate light video
Yes, you can get a license plate light on there. I typically make a small hole through undertail to run the wires inside. There are ways to route theough gaps between panels also but i like the convenience of the hole right where i need it. -BR
Yes, you can either return the full kit and purchase the adjustable one or you can only purchase the adjustable upgrade. Just email our Support Team and they can help out.
+Mrrhanson We have two projects we need to finish for the R3, one for the FZ-09, and then we will be designing a proper signaling system for the rear of the R1. The taillight is too slim to integrate signals into. On a taillight that slim it will not be apparent which side you are signaling to. We have a better system thought out and it will just take some design time to get it realized. Please stay tuned and check out our blog from time to time to get updated on the progress. You can also like our Facebook page to get updates posted to your feed.
+aadrianlee Not yet but we are in the process of getting that bike in the shop. When the bike arrives we will design a nice FE system for it and it will be launched soon thereafter.
We have one with same placement on the R6 but a little different manufacturing technique. Check it out here: tstindustries.com/Fender-Eliminator-R6.html
If you actually watch the video you see that same components mount to different places on the bike, so the location of the license plate is up to the owner of the bike.
Haha no. Just fukin with ya a bit. Was referring to the end where the extension and Allen comes out of the bolt and gets close to the painted body work.
haha...you should see that bike now. Paint condition is the last of our worries. I crashed it twice last year during races. Now it's getting some long deserved rebuild time.
makes perfect sense to manufacture something that is not DOT approved, because every track racer needs a license place relocation kit ☹☹☹☹@@TSTindustries
Can't wait to get this in...now, all I need is the postal service to quit messing up my delivery date and get it here! Great vid!
Right on!
@@TSTindustriesHello can you sand me the link for 2023 r1 please thank you
Very helpful video,i have the fender and the rear light from tst..works and look so good thx guyz
Thanks for the love and support!
How can this channel not have million plus 😖
i have this, best license plate relocator ever! and their light is the shit, bright AF. good job TST
Thanks man!
Great job, very smart of u putting the bike key in ur pocket.
Thanks for video! Great job. Please link below were i can buy exetly this plate number eleminator ,
The link is in the description of the video.
Hey , great quality. Although i have a question, how do i get the license plate light to work with low mount
You adhere the license plate light to back of license plate. Route wire to the inside of the bike either through a hole that you drill through subtray, or around and up the subtray. Then connect like shown in the license plate light video
for the mount to the undertail is there a way to have a license plate led light? or is that mount not able to have a light?
Yes, you can get a license plate light on there. I typically make a small hole through undertail to run the wires inside. There are ways to route theough gaps between panels also but i like the convenience of the hole right where i need it.
-BR
Looks great, mine was shipped out this morning can't wait to install it when it gets here. Will take before and after pics.
+Ricky Whitted I hope you can post some photos on Facebook and show us.
+TSTindustries I tried post some before and after pics with a review on the company timeline. But im not sure if it posted or not. Didnt see it lol.
Thanks buddy. I read through it and saw the pics. Looks good.
instablaster
What if I bought the standard kit but wanted the adjustable could I just get the adjustable bracket and send back the standard one
Yes, you can either return the full kit and purchase the adjustable one or you can only purchase the adjustable upgrade. Just email our Support Team and they can help out.
@@TSTindustries ok thank you
when you buy the product, the “TST undertail closeout” is also included or do you have to buy them separately
Thankyou
The Elite-1fender eliminator includes the closeout
When you guys planning to make a Integrated taillight for 2015 r1?
+Mrrhanson We have two projects we need to finish for the R3, one for the FZ-09, and then we will be designing a proper signaling system for the rear of the R1. The taillight is too slim to integrate signals into. On a taillight that slim it will not be apparent which side you are signaling to. We have a better system thought out and it will just take some design time to get it realized. Please stay tuned and check out our blog from time to time to get updated on the progress. You can also like our Facebook page to get updates posted to your feed.
do you do one like this for the bmw s1000rr ???
+aadrianlee Not yet but we are in the process of getting that bike in the shop. When the bike arrives we will design a nice FE system for it and it will be launched soon thereafter.
so interesting...can u sent to Thailand?
As always a very helpful video!
Keep these videos going
rico reci Thank you. We will definitely keep turning them out.
Thanks for the video...extremely helpful with my new bike{installation}
We're glad to hear we were able to help you out and be a part of your bike build. Ride safe out there!
Très beau support de plaque pour nos radars, merci TST
Do you have this style for a 2016 r6
We have one with same placement on the R6 but a little different manufacturing technique. Check it out here: tstindustries.com/Fender-Eliminator-R6.html
Where I came buy that i need that for my Yamaha r6 2017
tstindustries.com/TST-Elite-1-Fender-Eliminator-for-Yamaha-YZF-R6-2017-.html
thanx for this video and your effort.
+Hafiz Amer You're welcome. I'm glad our video has helped you out.
are you in FLorida ? Congrats for the video
Yes we are and you're welcome!
+TSTindustries you guys don't do tag lights with you kits? I don't wanna get pulled over as I have before with the same issue.
We do but that part has a separate installation video. Please check our website for details.
+TSTindustries ok.
Is this position for license plate is legal ???????
You would have to check your local laws.
@@TSTindustries Thanks for information
Thanks for the Video!
you bet!
Is this street legal?
this plate on this place is as legal as dealing weed on the entrance to the police station
If you actually watch the video you see that same components mount to different places on the bike, so the location of the license plate is up to the owner of the bike.
very clean very nice!
+fauxhemia Thanks!
Easy there buddy... @1:50
Are you talking about us speeding up the monotonous screw turning?
Haha no. Just fukin with ya a bit. Was referring to the end where the extension and Allen comes out of the bolt and gets close to the painted body work.
haha...you should see that bike now. Paint condition is the last of our worries. I crashed it twice last year during races. Now it's getting some long deserved rebuild time.
TSTindustries Shows what I worry about lol. Mine has yet to see the track 😢. One day....
Too many parts for a simple setup. Other setups has less finicky small parts.
We keep our kits versatile through this kind of design.
Haha, the mighty "elite-1 fender eliminator"
+Koenjour Yes yes...the mighty Elite-1
+Koenjour In my opinion the best system out there for the 2015+ R1....but my view is not objective since I designed this system.
***fyi, this relocation kit got me lit up by the cops because it is not visible with in 50 feet.***
We do state in the product page that this kit is not DOT approved. It is the riders responsibility to check their local laws. -TST
why the hell would anyone need this for a race track then...stupid@@TSTindustries
makes perfect sense to manufacture something that is not DOT approved, because every track racer needs a license place relocation kit ☹☹☹☹@@TSTindustries
funny how the plate was the only prob! -CP NATION@@TSTindustries
and actually the law states that the license plate must be visible within a certain feet of readable distance...🤣@@TSTindustries