Can you guys make a 2nd configuration without the passenger pegs?? I don’t have pegs on mine and looking to have my plate relocated like the 2nd configuration like the video
Unfortunately the factory is having trouble keeping up right now. We have been selling 4-5 times faster than they can supply. Your best bet is to drop your email into the notification box on the product page. As soon as the parts are marked back in stock our system will send you an email. I would say at that point be ready to snipe because they are going to go fast.
hey tst I bought your guys plate holder and saw right above that reinforcement pice that theirs a plate missing that has a hole to the battery would u guys now the price number?
go to MRcycles.com and navigate to your bike model/year. The microfiche on that site is easy to navigate and prices are good. That is where we get our OEM parts.
I just checked all the microfiche for those components. When you remove your footrests the link will have no place to mount. I remember a customer that was in this situation. He had to use longer screws to screw through the subframe into the fender eliminator hinge bosses and that allowed him to still install our fender eliminator on that setup. I hope this helps.
that is touch to say without trying it on there. I would not recommend the lower setup with a lowered suspension though. It may not have enough clearance for the license plate in that location.
we sell these kits with and without license plate lights. The installation video does not show the license light installation because we have a separate video for that.
+WHITE LIGHTNING A number of companies made it under license from whoever invented it a couple years ago. I think at this point only Stanley tools still offers it. Look up Stanley tools...these aren't too expensive and make every job easier.
Can you guys make a 2nd configuration without the passenger pegs?? I don’t have pegs on mine and looking to have my plate relocated like the 2nd configuration like the video
try to buy it on their website, but it is not in stock, :( when will it be available again?
Unfortunately the factory is having trouble keeping up right now. We have been selling 4-5 times faster than they can supply. Your best bet is to drop your email into the notification box on the product page. As soon as the parts are marked back in stock our system will send you an email. I would say at that point be ready to snipe because they are going to go fast.
Just installed mine. I don't know how you got that nut on the screw for the closeout so effortlessly.
I just held it in place and rotated the screw from the outside
TSTindustries I put the screw on a L wrench and slid it over the screw. I love the look of second configuration.
good deal man!
Спасибо! Побольше делай видео на разные мото! Хорошего дня!
hey tst I bought your guys plate holder and saw right above that reinforcement pice that theirs a plate missing that has a hole to the battery would u guys now the price number?
go to MRcycles.com and navigate to your bike model/year. The microfiche on that site is easy to navigate and prices are good. That is where we get our OEM parts.
Will this still work if the rear pegs are removed?? only got the r1 yesterday so not sure what parts would remain if I removed the pegs
Craig Cadman is the dogbone shape link that goes between the rear pegs still present on your bike?
I still have my legs fitted but if I removed them can I still leave the bar on?? Or does it have to be removed??
Craig Cadman I believe that you can keep it in place. Then our fender eliminator attaches to that link.
I just checked all the microfiche for those components. When you remove your footrests the link will have no place to mount. I remember a customer that was in this situation. He had to use longer screws to screw through the subframe into the fender eliminator hinge bosses and that allowed him to still install our fender eliminator on that setup. I hope this helps.
Thank you very helpful I will just grab a couple of longer bolts 👍👍👍👍
If you snug the bolts light/tight enough you could have a pretty good flip kit if you want to reach back by hand. haha.
+Nathan illest Yea but then the screws would probably vibrate out easily
Will the low mount option still be visible if my bike is lowered 2"???
that is touch to say without trying it on there. I would not recommend the lower setup with a lowered suspension though. It may not have enough clearance for the license plate in that location.
I have a 2004 and I don't have that small metal spacer at the foot pegs.
The bottom of this tail looks nothing like my bike. I have 4 holes at the end of the tail, not 3 and one 1" hole close to the tail light.
what if I don't have the part for the lower option what would that pics be called?
That part is called "Reinforcement" by Yamaha, and the part number is 14B-27469-00-00. You can get that at MRcycles.com
Hell yeah thank you guys, love you guys
$99 bucks for this?Are you fucking shitting me?!!!!!!!!
CNC Machined, anodized black, fully adjustable, and allows mounting in two locations. OR you can spend $17 on our standard one, choice is yours.
TSTindustries I’ll just save my money and make my own.I ain’t paying $100+ for a damn license plate mount
@@seymourclarkson2336 that's cool
I would have to have a light to illuminate the the plate, it sucks that this doesn't have one :/
we sell these kits with and without license plate lights. The installation video does not show the license light installation because we have a separate video for that.
I will thank you
Sick!!!!!!!!!!!
Nice exhaust pipe,.
+o0oPau Thanks. We have a bunch of them ready to ship from our warehouse.
You can see more info on the exhaust here: tstindustries.com/Toce-T-Slash-Exhaust-Yamaha-YZF-R1-2009-2014.html
2011 r1 toce fender eliminator with tst industrieslicenseplate light
This video shows the installation of our own TST Industries fender eliminator.
What kind of ratchet is that?
+WHITE LIGHTNING A number of companies made it under license from whoever invented it a couple years ago. I think at this point only Stanley tools still offers it. Look up Stanley tools...these aren't too expensive and make every job easier.
+TSTindustries thank you
+WHITE LIGHTNING no problemo
Haha Bart you weren't lying when you said everyone asks about the ratchet.
we should just start having it for sale to make it simple for the folks that want that tool.
$100 for a lil bracket bruh y’all trippin
It's more than just a "lil bracket" but to each their own! Ride safe out there.