94-97 Honda Accord Fuel Filter Replacement
ฝัง
- เผยแพร่เมื่อ 12 พ.ค. 2021
- Replacement of fuel filter on 1995 Honda Accord.. Should apply specifically to 5th generation
(94-97) Accords.. Filter used in video fits 165 Honda models from 1992-2001..
Genuine Honda Filter 16010-ST5-E02: www.ebay.com/itm/182958668987...
14mm Crows Foot Wrench:www.homedepot.com/p/Sunex-Too...
Video That Showed Me How: • Honda Accord Fuel Filt...
![[LIVE] ใครคุยเรื่องบอล "พ่องตาย" #คุยให้เด็กมันฟัง EP.43 (13/7/67)](http://i.ytimg.com/vi/8bHYL8RuBqs/mqdefault.jpg)
Thank you Honda engineers for making a simple filter change so difficult 👏 and the Haynes Manual recommends this be done every 30k miles or 2 years 😂.
If you think these are difficult dont ever try to replace the filters on older Corolla and Camrys. The flare nut fittings on them were over tightening at the factory to the point that it seized the threads inside the filters. The fitting will turn extremely hard all the way out.
Honda deemed this filter a “lifetime” item. Even the technicians at the dealer had trouble with these.
Lifetime meaning every 100k miles.
Great camera work, you are truly magical. You have helped lots folks overcome Honda's ridiculous filter design. Replaced the filter on my 2000 Prelude(all day job). Same procedure but was able to use the crow's foot from top of engine.
Glad to have helped.. Thanks for reply..
I love Honda, but agree about some of the engine design as far as parts placement. Things that should be changed should be located without needing to get under the car and so that your arms and hands can fit there. I am also pissed about where the transmission fluid is supposed to go - not easy to find a funnel to get to that deep arrow or the tiny hole.
@@genkiferal7178 Yeah, I think most folks just attach a a long rubber hose to the end of the funnel and shove the other end into the tiny hole, hope for the best.
Underrated but very good content and very detailed guide for the job man. Keep them coming, i have honda crv and not accord but i kept watching all your vids. 😅 Cheers!
Thank God for your video. The Lord bless every vehicle you touch bro.
Hope so.. Thanks..
PB this detailed vid helped make my 94 filter replacement easy as fuck. Thank you. Happy new year.
Glad to help.. Happy New Year to you too..
Great video! Very helpful, I learned how to do this. I also enjoyed the comments and the patient skill you showed my friend.
Keep up the good work. GOD bless you PeanutButterMan. 👊🏼😊
250K miles on 94 Honda accord. Original filter. this going to be fun.
get ready to curse the engineers.. good luck!!
You do some great work! You should get a set of swivel sockets. I've been putting off getting some but it's next on my list when the wife says "what you want for Christmas " lol..
Thanks for the great camera work helped alot
You are welcome.. Thanks for reply..
On the 97 v6, its up top, so much easier to access
This was a great video very informative was on point thanks
You are welcome.. Thanks for reply..
Cool video. Very informative thank you
You're welcome.. Thanks for reply..
Great video, 👍
Man I am dreading this job, thanks for the tips and great video!
Google "94 accord fsm pdf" for full factory service manual.
@@westhouse4641 I have a physical one lol
@@Yappyboy11 just thought id help out if not. Here's another helpful tip.For reference in the book, under certain diagrams, mainly electrical ones, usdm models are referenced as "kh model". Its a big book, its easy to miss that tidbit.
Check your ecu capacitors too. Nearly 30 years old now. I just replaced mine last summer after finding some leaking.
@@westhouse4641 I appreciate it, I’m heavily invested in this chassis so before I inherited my wagon my dad got a FSM. And yea I just had to replace my ecu as it had 4 leaking caps and caused a bunch of CEL codes.
@@Yappyboy11 you know about majestic honda already? Cheapest genuine honda parts direct from a honda dealer on east coast.
Exactly why they put and cram it in so it takes longer to fix or change, but it is a good video you did.
Thanks..
Thanks for the video.👍
Glad to help..
This video was so well explained thank you so much for your help 🔥🔥🔥
You are welcome.. Thanks for reply..
Pull the upper intake plenum. Have all kinds of room. Also in case you didn't already have it, you can search "94 accord fsm pdf" on google and the first hit is the full factory service manual. I own 2 of these 5th gen accords and I have no idea how you fit your hand and a fuel filter underneath the master cylinder lol
Found the field service manual pdf.. Didn't have it.. Thanks for that.. And yeah.. If you have big hands/arms you're gonna have trouble doing it the way I did.. Might have to remove the plenum like you mentioned..
@@tongo117 glad i could be of assistance.
Could mine be in a different place on my 96 Accord V6? There is something that looks very, very similar, but it is much higher up - but still on the driver's side on the firewall.
I changed the filter on my 5th gen Prelude a couple years ago. Nightmare fuel.
No wonder mechanics charge so much for repairs, the average person don't have all these tools lol👍 I love my old honda , it's been so reliable.
I’m having problems tightening the filter at the bottom I tighten and tried starting the car and the fuel was leaking.
Was it bc of the washer or the line wasn’t tighten enough ? Please help quickly
No washers underneath so if it's leaking there it's likely not tight enough.. If the leak is up top, did you install 2 new crush washers? If so, that may also not be tight enough..
I'm pretty sure the fuel filters are original on both my 4th and 5th gen... they're both over 300k. Can't wait to saw into my filter to check the mediums on them.
yeah with 300k they'll be nasty..
I don’t know, but he’s in both ranches from the bottom. I could not get them next to each other and still have room to turn 14
😮Hi dude i have 1996 accord 2.2 F22B2 engine my problem is fuel pump broken then i changed fuel pump (original DENSO) but This fault continues both before and after the fuel pump is replaced.Engine stalls when slowing down while driving and the pump works very loudly, it seems like it is having trouble working.What do you think could be the problem? I couldn't figure it out. Could it be the fuel filter? Or is it related to the electrical wiring of the fuel pump and float?
Since you already replaced the fuel pump, I would recommend replacing the fuel filter and the fuel level sending unit. Those three items work together in series.
Ratchet wrench would have made that 10mm bracket bolt cake work..just sayin 🤣 great breakdown on this hell job
ratchet wrenches are on my wish list..
After I changed this fuel filter. My car stalls. Help !!!
Why would anyone put the same filter back on...if I'm ever able to remove mine, I'm gonna install an in-line Wix.
UPDATE: I used a 3 ft beaker bar with a crows foot and got the fuel filter off. It was a bitch but I was able to slide a 3/8 hose over the fuel line and got a clamp on it. I then installed an in-line filter. I did replace the hose from the fuel rail with a banjo bolt / hose bib. The new filter is looped around and is up against the firewall. I also relocated the oil filter. I now have to re-do the timing belts that my mechanic did; to get rid of the vibration. I also got rid of the captured rotors with new hubs from an Acura.
Soo no impact gun?
I cant find in my 98 honda accord ex
Is there not an aluminum crush washer on the bottom bolts as well?
There are no washers underneath.. Fuel line fitting screws directly to the filter..
@@tongo117 Oh ok great thanks!
I clicked on the link to get the 14mm crows foot wrench but Home Depot has discontinued it.
This is it.. same brand.. Sunex:
www.finditparts.com/products/1842990/sunex-tools-971014?srcid=CHL01SCL010-Npla-Dmdt-Gusa-Svbr-Mmuu-K1842990-L262&srcid=CHL01SCL004&{feed_item_id}&{extension_id}&gad_source=1&gclid=Cj0KCQjwxqayBhDFARIsAANWRnQXeNiVOekosGvVByFSGqtVPXta-_YVRXm5DUzHWhmCbLPp4AEuGzMaAuynEALw_wcB
@@tongo117 Thank you so much!
Have you ever found out what that ticking was at 12:30 by chance? Mines doing the same thing... it drives me crazy.
Valves tapping I assume.. Last adjusted them in 2017 th-cam.com/video/Dp-9YlSB0PM/w-d-xo.html.. May need to do so again..
me doing this with none of the right tools for 5 hours
I think whoever came up with the file filter bracket idea should get their ass kicked (provided they are alive).
lol is she faster now?
only difference I've noticed is a slightly smoother idle..
Doesn't matter if it go faster or nah, the big deal is the maintenance to prevent bigger issue to the car.