I have this wheel stand with a Gtech G29... with the addition of a wheel pan for a desk chair.. This is everything I need at the low level of sim racing that I am doing... I like vintage cars.. so if the wheel stand wiggles a bit when I am thrashing a MG-A.. I think it adds to the immersion.
I agree! It's not like a real car is going to sit perfectly still for you. It's going to fight you a little. I view the slight movement I've experienced as a net positive and, yes, oddly immersive.
Genau so ein Gestell (nur ohne Shifter holder) habe ich mir damals auch geholt für mein Fanatec CSL Elite. Und was soll ich sagen?! Ich nutze es immernoch. 😅
i just got this last week. instructions were _thee worst_ part (ive seen picture books do better) but when i got it all together it ran solid. logged in a bunch of hrs drifting in AC. there are arm supports you can buy to reduce the wobble. really wish it was included, but it's cool
i have the csl dd and clubsport shifter i dont mind screwing a hole for the csl dd but can the shifter mount on the shifter holder without screwing any holes?
I am going to bolt 2 pieces of angle iron on the side bars of the wheel holder and connect them to the bottom rail........This might stiffen the rig up a bit.
Sollte klappen, auf den ersten Blick sind die Löcher zum befestigen gleich wie bei den anderen Thrustmaster Modellen. Zur Not muss die Bohrmaschine ran. 😅
DON'T BUY THIS. I bought this stand because of this review and after a few minutes of use I regret it. The stand is ultra unstable and unusable. I bought a t300 rs and unfortunately it flies left and right and tilts all the way forward (on the driver). Reviews on the website are manipulated. After leaving a negative review, it did not appear on the website.
You can by two reinforcement bars that go vertical from bottom of stand up to arms. Night and day and highly recommend. It's actually sturdy with them.
I have this wheel stand with a Gtech G29... with the addition of a wheel pan for a desk chair.. This is everything I need at the low level of sim racing that I am doing...
I like vintage cars.. so if the wheel stand wiggles a bit when I am thrashing a MG-A.. I think it adds to the immersion.
I agree! It's not like a real car is going to sit perfectly still for you. It's going to fight you a little. I view the slight movement I've experienced as a net positive and, yes, oddly immersive.
Where do you have buy the addition for a desk chair?
This was a surprise would be nice to se more if this kind if content along with the normal stuff.
Genau so ein Gestell (nur ohne Shifter holder) habe ich mir damals auch geholt für mein Fanatec CSL Elite. Und was soll ich sagen?! Ich nutze es immernoch. 😅
i just got this last week. instructions were _thee worst_ part (ive seen picture books do better) but when i got it all together it ran solid. logged in a bunch of hrs drifting in AC.
there are arm supports you can buy to reduce the wobble. really wish it was included, but it's cool
Do I need to put the shifter part there because I don’t have a shifter
?😅
No, it’s an extra piece so if you don’t want it just don’t attach it. 👌
@@zocker1990 ok thanks
i have the csl dd and clubsport shifter i dont mind screwing a hole for the csl dd but can the shifter mount on the shifter holder without screwing any holes?
Thanks for the review. Will this wheel stand withstand my Thrustmaster T-LCM loadcell pedals?
wait you said it couldn't be attached with fanatec, but you did used a fanatec wheel base, so can you also put a fanatec wheel on it?
Can someone please post DIY solutions that eliminate the wobble of the Vevor Wheel Stand? Thanks a lot.
I am going to bolt 2 pieces of angle iron on the side bars of the wheel holder and connect them to the bottom rail........This might stiffen the rig up a bit.
I have this exact one and I have a direct drive from Moza racing
I am looking to buy the r5 bundle. what do you have and is it solid or does it move a little?
Is it compatible with. Thrust Master Ferrari gaming wheel?
👍 Gutes Review
Is it easily foldable with the wheel, or do I need to disassemble any screws or take off the wheel?
Look at 2:29 .
You can fold it with the wheel attached but it won’t become as small as without a wheel.
hast du ne ahnung ob auch ein Trustmaster T248 drauf passt ?^^
Sollte klappen, auf den ersten Blick sind die Löcher zum befestigen gleich wie bei den anderen Thrustmaster Modellen.
Zur Not muss die Bohrmaschine ran. 😅
@@zocker1990 die selbe Firma hat noch ein bissl stabileres wo das t248 direkt angegeben ist. Hab das mal bestellt^^ danke dir
is it for g923 too?
Man hört das du deutsch bist 😂💪👍
😎
Great rew, thanks
👏🏻👏🏻👏🏻
Thank you!
im about to order it for $70 :)
Did you order it? I got one from Ebay for $54 Free shipping
its on sale for $40
I seem to be noticing that you have a german accent
DON'T BUY THIS. I bought this stand because of this review and after a few minutes of use I regret it. The stand is ultra unstable and unusable. I bought a t300 rs and unfortunately it flies left and right and tilts all the way forward (on the driver). Reviews on the website are manipulated. After leaving a negative review, it did not appear on the website.
Hi, like I said in the review you get what you pay for. I guess you need a stronger rig in a different price range.
yeah the t300 is way to strong for this lil stand. this is more for those entry level like the G920 or the T150.
@cheapbstard hi, I am also cheap bastert will this be OK for g923?
@@cheapbstardfacts he needs the omega Gt 😂😂
You can by two reinforcement bars that go vertical from bottom of stand up to arms. Night and day and highly recommend. It's actually sturdy with them.
I got the worst instructions with mine.
Im so ready to get rid of this
could you put a racing seat on this and if you can is there one that already has the mount bracket?
Does it looks like that there's space for a racing wheel on a foldable wheel stand that Is 50cm long?