I've now fitted a Cobb Redline Carbon Fibre Intake to the car and have a new similar video on my channel for it, might be of interest if you're keen to compare the sound & performance to a proper CAI intake!
When I had my first car that my dad sold me when I was 18 I was the only one with a 297 WHP 1998 Saturn SL2 it was a total sleeper and a monster. But before it became the quarter Mile sleeper I built it to be over time one paycheck at a time, I had a K&N high flow replacement panel air filter in the stock air box but since I was just starting out with it I couldn't afford a cold air intake so my dad suggested that I drill holes thru the bottom of the stock air intake filter box to make it loud and also increase air flow which it did that was one of my first little homemade mods to make the car "sound cool" lmao. Eventually as I saved my pennies I slowly modded it one thing at a time starting with basic bolt ons like a real cold air I intake, big bore throttle body, headers, custom glass pack exhaust with a cable operated dump pipe just before the cat then it was onto top end mods like performance head and hot street cams and Eventually me and my pals pulled the block and built the entire bottom end bored and stroked with all forged internals for a final compression ratio of 10.9:1. I was 18 so I blew every dime I earned to soup up that car and I loved it cuz nobody expected to get burned by a saturn and it was before saturn came out with the redlines and I would be ridiculed by all the Honda guys. But I shut up their shit talking when I smoked their turbo Honda SIs with my fully built all motor saturn shooting flames from the dump pipe under the car. I got taunted for racing out that car but I saw it's potential and I like to have a car that is something unique. And it all started with drilling holes in the bottom of the air filter housing to make it sound cool when I picked up my friends man I felt so cool like I was driving a loud muscle car lol
Dont block the hole, get a quality aftermarket filter and you 100% can hear the difference. (09 foz sh5 XT) Note: remember hole if going throught high flood water
I had a 2006 Foz XT that had a silencer delete and a cone filter mounted down low in front tof the driver's side wheel and there was loads of amazing turbo flutter. I wonder if a previous owner had also blanked off the BPV.
Which means worse mpg, more revs, and more wear on your car. When I removed my intake resonator, it was back on not even a day later😂, made cool noise but also made it feel like half the oomph left the car
nice video! I went stage 1+ on my 2020 STI and the induction noises are amazing! I hooked up some mics in the cabin and made a few videos on it already. I'd say it's about 3x louder than the intake silencer mod you did. Check the vids out. I think it's worth going Stage 1+
@@BenCad Hello 🙋, I got a question, I removed the air duct, resonator and filter housing for cleaning, I noticed small holes in the resonator and filter housing so I filled them with silicone. What is the purpose of these little holes, and if I seal them would it be a problem? Please, answer me 🙏
@@omartakhaineh3943 hey Omar, I think I know what you’re talking about. Eg there is one tiny hole at bottom of the silencer. I’m not an engineer but I’ve assumed it exists to let out small amounts of water and any particulars that may fly into your intake while driving.
What were the measurements for the citronella candle lid? Thinking of getting pvc push on cap, they have then in 50mm 90mm and 100mm, could always machine down to size but if you know off-hand could you let me know? I'll be doing this plus muffler delete and let you know how it goes.
Hey Lachlan, okay I still have the candle out on my deck so just gave the candle opening/hole a quick measure. It’s 70mm in size - that’s the opening only and not including the edge. Including the glass container edge it’s approx 87mm. Hope that helps!
I just bought a prl drop in box with air duct came with a cover for the hole to remove the resonator but I cept mine in to keep fresh air. The resonator is made to hole back pressure of clean air in and circulation to keep air pressure built up.ive dyno cars before and they actually lost pressure in the system and dround out the performance.to my eyes it was proven by real numbers .kind of like a exhaust you want back pressure. Not the people that do resonator cat deletes and do straight pipes. You actually kill the car performance
Hello 🙋, I got a question, I removed the air duct, resonator and filter housing for cleaning, I noticed small holes in the resonator and filter housing so I filled them with silicone. What is the purpose of these little holes, and if I seal them would it be a problem? Please, answer me 🙏
if you have a larger intake = and turbo - a K&N filter = you will benefit a little more = + driving the car for 1 hour will see it retune it`s self ! = i did it and yes a little and high RPM - 3hp . = my ej207 rev`s to 8,500 rpm ! so all is a little differant = GOOD LUCK = turbo subaru ! YES .
I've now fitted a Cobb Redline Carbon Fibre Intake to the car and have a new similar video on my channel for it, might be of interest if you're keen to compare the sound & performance to a proper CAI intake!
When I had my first car that my dad sold me when I was 18 I was the only one with a 297 WHP 1998 Saturn SL2 it was a total sleeper and a monster. But before it became the quarter Mile sleeper I built it to be over time one paycheck at a time, I had a K&N high flow replacement panel air filter in the stock air box but since I was just starting out with it I couldn't afford a cold air intake so my dad suggested that I drill holes thru the bottom of the stock air intake filter box to make it loud and also increase air flow which it did that was one of my first little homemade mods to make the car "sound cool" lmao. Eventually as I saved my pennies I slowly modded it one thing at a time starting with basic bolt ons like a real cold air I intake, big bore throttle body, headers, custom glass pack exhaust with a cable operated dump pipe just before the cat then it was onto top end mods like performance head and hot street cams and Eventually me and my pals pulled the block and built the entire bottom end bored and stroked with all forged internals for a final compression ratio of 10.9:1. I was 18 so I blew every dime I earned to soup up that car and I loved it cuz nobody expected to get burned by a saturn and it was before saturn came out with the redlines and I would be ridiculed by all the Honda guys. But I shut up their shit talking when I smoked their turbo Honda SIs with my fully built all motor saturn shooting flames from the dump pipe under the car. I got taunted for racing out that car but I saw it's potential and I like to have a car that is something unique. And it all started with drilling holes in the bottom of the air filter housing to make it sound cool when I picked up my friends man I felt so cool like I was driving a loud muscle car lol
Dont block the hole, get a quality aftermarket filter and you 100% can hear the difference. (09 foz sh5 XT)
Note: remember hole if going throught high flood water
I had a 2006 Foz XT that had a silencer delete and a cone filter mounted down low in front tof the driver's side wheel and there was loads of amazing turbo flutter. I wonder if a previous owner had also blanked off the BPV.
Same here but left the hole open and removed the fog light for more air intake!
LGT 2005
Cheers
My 2008 wrx snorkel mod was just cutting the black hole out with a hole saw. It was already outlined. Should have done it sooner. Huge difference.
To my ears the difference was definitely noticeable. I probably wouldn't bother with plugging the hole though.
Thanks. Great video. Appreciate the time you put into it
Thanks! Appreciate the feedback :)
I've always thought that's like a catch can for small water ingest :)
Literally same here
Great video, informative- yep, thorough comparison- yep, mythbusted- plausible. Can’t wait for the next video. Cheers from Syd,AU.
Cheers! Thanks for the feedback Shane :)
Had the same result as you - Own a Forester XT 09
Hemoltz resonators arent just for engine sound attenuation. Its part of the breathing for the engine. Removing it hurts low end torque.
Which means worse mpg, more revs, and more wear on your car. When I removed my intake resonator, it was back on not even a day later😂, made cool noise but also made it feel like half the oomph left the car
@@ib1424 those guys called "engineers" knew what they were doing lol
nice video! I went stage 1+ on my 2020 STI and the induction noises are amazing! I hooked up some mics in the cabin and made a few videos on it already. I'd say it's about 3x louder than the intake silencer mod you did. Check the vids out. I think it's worth going Stage 1+
either way, if you want to stay under warranty, that silencer delete would still be a close second if you want to bring out some induction noise.
Thanks for the comment, had a look at your vid, yeah that sounds ideal! Definitely next on my to do list.
@@BenCad Hello 🙋, I got a question, I removed the air duct, resonator and filter housing for cleaning, I noticed small holes in the resonator and filter housing so I filled them with silicone. What is the purpose of these little holes, and if I seal them would it be a problem?
Please, answer me 🙏
@@omartakhaineh3943 hey Omar, I think I know what you’re talking about. Eg there is one tiny hole at bottom of the silencer. I’m not an engineer but I’ve assumed it exists to let out small amounts of water and any particulars that may fly into your intake while driving.
@@BenCad Thank you 😊
so glad my 2019 USDM WRX didn't have that cow udder sound sound box/water trap
Doing this to my 00 Outback. It seems mild not to over bearing 100%. I don't wanna blow $450.00 on a intake when a water pump is $175.00.
i’m almost positive silencer is a joke subaru engineers named the catch can for debris that can potentially be sucked up through the scoop
Mine us missing the duct that goes from the air filter box to the radiator support. It's kinda loud.
I left mine open on my mazda cx7 and notice a big difference when i put my foot down
How has this run since you've done it? I know subies are extremely sensitive, especially relating to most mods requiring a tune.
Drives exactly the same, can’t notice a difference really. I’ve got a proper CAI waiting to go on soon.
What were the measurements for the citronella candle lid? Thinking of getting pvc push on cap, they have then in 50mm 90mm and 100mm, could always machine down to size but if you know off-hand could you let me know? I'll be doing this plus muffler delete and let you know how it goes.
Hey Lachlan, okay I still have the candle out on my deck so just gave the candle opening/hole a quick measure. It’s 70mm in size - that’s the opening only and not including the edge. Including the glass container edge it’s approx 87mm. Hope that helps!
@@BenCad Legend
I have a cool thing for the intake want to have a look at it?
great video, thank you!
Thanks for the comment Adrian!
what is the point of the silencer? noise I guess-- don't make sense to me
You Definitely will lose HP by removing the intake silencer. It’s main function is NOT for sound. Look it up.
I just bought a prl drop in box with air duct came with a cover for the hole to remove the resonator but I cept mine in to keep fresh air. The resonator is made to hole back pressure of clean air in and circulation to keep air pressure built up.ive dyno cars before and they actually lost pressure in the system and dround out the performance.to my eyes it was proven by real numbers .kind of like a exhaust you want back pressure. Not the people that do resonator cat deletes and do straight pipes. You actually kill the car performance
Does it need a tune? Sorry, stupid question
Shouldn't :)
This must be an australia thing. My usdm does not have this white box
Interesting - Wouldn't surprise me though, Australia has some tight rules on cars.
I did the same thing on my usdm sti and nothing 🙃
Leave open more air flow
You should've left the hole open
Hello 🙋, I got a question, I removed the air duct, resonator and filter housing for cleaning, I noticed small holes in the resonator and filter housing so I filled them with silicone. What is the purpose of these little holes, and if I seal them would it be a problem?
Please, answer me 🙏
@@omartakhaineh3943 they’re simply drain holes in case water were to get in the intake it’s probably not a big deal to fill them
@@Volvo760T Thank you 😊
@@Volvo760Tthanks!
if you have a larger intake = and turbo - a K&N filter = you will benefit a little more = + driving the car for 1 hour will see it retune it`s self ! = i did it and yes a little and high RPM - 3hp . = my ej207 rev`s to 8,500 rpm ! so all is a little differant = GOOD LUCK = turbo subaru ! YES .
replace your air filter ha looks really dirty...
CAI is on the way :)
@ben what CAI did you get?
K&N best 1