Ok, I ran a test based on some of the comments below and the issues of the processors not getting back into the system for version 1.20. I started a 1.20.1 world with AE2 installed and attempted to make the auto inscriber as detailed in this video. I did find there were a few changes for it, but nothing that would break the build. First, the top center inscriber used to combine the redstone, silicone and processor template into the final processor does not need to be turned anymore. It can just be placed upright and it will still put the 3 items into the correct slot. If you do turn the inscriber, it will still work fine. Another difference is that the export bus no longer need an expansion card to allow exporting more items. They now have a full row available at the start. Again, this still does not break the build but does make it a bit easier. An extra shoutout to @spencerx5176 for helping me with reporting and testing this for 1.20. 🙂
Glad that it worked well for you. I had done a test of this on my twitch and commented on this video that 1.20.1 does have a few differences in the build, but they are not things the really break this build, but do make it easier.
Hey double. I see you have made an attempt to start making videos again. The grind is hard but you got a good voice and ability to explain. Their are a few of us small creators playing All of Fabric mod pack on a sever hosted by dewstream. If you have any interest let me know.
I am considering but I also found out that the crystal growth devices are changing in 1.20. So it may be better to wait until after the new update comes out before doing a new series on AE2.
i was so confused why mine wasnt working... it made the finished circuit but never exported it back to the system i found out after rewatching ure cable connections to the pattern provider were different so i moved them 1 block now it works x.x thanks for the guide
hey i followed the tutorial, and it worked on other versions, although im on 1.20.1 and it seems that my inscriber make the following circuits but they don't get output to go to the final inscriber and i can't get it to work, any ideas?
Greetings. Usually the primary issue would be not setting the storage buffer correctly or the export buffer that is used to return the completed circuits to the inventory. I have tested this in 1.20.2 before and it does work.
Thanks for the video! I tried to do this in 1.18 and im having trouble where the crafting computer will not craft the items. I see that one of the front storage buses is empty (One connected to silicone printer), could this be an issue?
Greetings. Hard to say exactly what the issue is. The storage buses all need to have the correct raw and processed items in them to allow movement. The export buses also need to have the correct item set for those to move items as well. Then the crafting pattern also needs to identify what raw items need to be sent to the auto crafter.
Greetings. Did set the storage bus behind the top middle inscriber to hold the 3 completed processors and put the 3 completed processors into the export bus to export the finished processors?@@annasmith5216
Greetings. Did set the storage bus behind the top middle inscriber to hold the 3 completed processors and put the 3 completed processors into the export bus to export the finished processors?
Might need to see if you set the correct items in the storage bus's and in the export bus. If those are not set correctly then the items will not flow.
Greetings. yes it does work in 1.19.2 as I had made the video in 1.19.2. It is the same design that I had used in 1.18 as well. If you find an area to be unclear, please let me know.
@@spencerx5176 If the inscribers are holding onto their items then it may be the storage buses on the back are not set to hold the created inscriber item. I will have to set up a 1.20 world to test to see if this has changed in the current version and how to modify the design to work.
@@spencerx5176 I am going to start up a new world to test AE 2 on 1.20.1. Please join me on my twitch channel: www.twitch.tv/doublepixel42 and you can see me test this live so we can find out what works, and what doesn't.
You should have an export bus on the side of the top inscriber set with the 3 pressed circuits and then an export bus set with the 3 completed circuits attached to the original pattern provider.
@@doublepixel4210 I had done that. I think the issue was too many channels on one cable. Not using Dense. So I separated things around and now it seems to be working fine
If you have too many channels used then you missed a quartz fiber that would separate the lines. There were 2 places that I had used it to isolate one mini circuit for the silicone processing and one on the top of the first inscriber to keep it from being read twice. @@King_Georges_Calcified_Elbow
You might want to check to see if you have the storage buffers set correctly for the items they are supposed to hold. That and make sure you put the quartz fiber in the correct locations so you don't have too many devices on a single line.
May have added an extra cable somewhere. The inscriber that makes the silicon template is on its own network. Might need to pause the video in different areas so you can compare to the build.
It means you need to make a crafting processor first. You need that before the system can know how to handle the patterns. I believe it's a crafting cpu, coprocessor and crafting display for the simple crafting processor.
I got a Problem in ATM 9.. it says that the Printed circuit would miss. When i put the patter in the Pattern Provider it say that i need like 50 presses🫠 help?
Thank you for being very clear on this tutorial, this video is a hidden gem but it saved me!
Glad that it was able to help you.
absolutely love this tutorial, have been trying to think of how to make one for a while haha
Glad that it was helpful.
basically a year late but thank you so so much. You are a life saver. This is so useful
Ok, I ran a test based on some of the comments below and the issues of the processors not getting back into the system for version 1.20. I started a 1.20.1 world with AE2 installed and attempted to make the auto inscriber as detailed in this video. I did find there were a few changes for it, but nothing that would break the build. First, the top center inscriber used to combine the redstone, silicone and processor template into the final processor does not need to be turned anymore. It can just be placed upright and it will still put the 3 items into the correct slot. If you do turn the inscriber, it will still work fine. Another difference is that the export bus no longer need an expansion card to allow exporting more items. They now have a full row available at the start. Again, this still does not break the build but does make it a bit easier. An extra shoutout to @spencerx5176 for helping me with reporting and testing this for 1.20. 🙂
I can confirm it works like a charm in 1.20, thanks for the video!
Glad that it was able to help you. @@skepticalfrog
THANK YOU
this was such a huge help and still works perfectly in the 1.20 version aswel
Greetings and glad it was of help for you.
Thanks mate, really made it simple and easy to follow!
Glad it helped
Huge Thank You
Greetings and glad it helped you.
Cool tutorial :D really great and easy to follow.
Glad that it was able to help you.
Thanks for the video!
This worked on ATM8 1.19.2 as of 5/29/2023
thanks for the info
Glad it worked for you. I have used this design in 1.20.1 as well with only slight modifications.
Thank you a lot you explained everything clearly, it helped a lot😊😊
Glad it was helpful!
Thank you so much ! Well explained 👍
You are welcome!
Works amazing in 1.19. Thanks you so much!
Glad that it has helped you.
Finally!!!- it worked, thank you!
amazing tutorial, please make more AE2 tutorials, as many are outdated
Greetings. What issues were you wanting tutorials about? I may decide to start a private world specifically to address different issues in using AE2.
I am currently starting a world with ATM-8. I will be using AE2 in there.
Thanks man ! That's a great video .
Glad you liked it!
Dude, thank you so much, you're just something, you're just the most f***ing awesome.
you're amazing ! thanks
Great video! The system worked perfectly fine in ATM 9 (Minecraft 1.20)
Glad that it worked well for you. I had done a test of this on my twitch and commented on this video that 1.20.1 does have a few differences in the build, but they are not things the really break this build, but do make it easier.
Doesnt work for me :c
All I can suggest is to review the storage buffers and make sure you didn't forget the quartz fiber.@@DoraNx
Thanks! Clear instructions.
Glad it was helpful!
Perfect set up, thanks
Glad that it was able to help you.
Thank you! It helped.
Muuuuito obrigado! Me ajudou de mais!
Glad that I was able to help.
Thanks for the tutorial!
No problem!
Thank you so much for this!
You are welcome.
thanks this is a great tutorial
Glad that it was able to help you.
great video. this helped alot
Glad it helped
Works perfectly in ATM9 1.20.1 5/11/2024 :D
thank you for simple tutorial
Greetings and glad it was helpful for you.
Hey double. I see you have made an attempt to start making videos again. The grind is hard but you got a good voice and ability to explain. Their are a few of us small creators playing All of Fabric mod pack on a sever hosted by dewstream. If you have any interest let me know.
Greetings. Sure I am interested. Sorry I have not replied for some time, been rather busy with work and end of year for school.
amazing tutorial, but can you make an updated version with the extended inscribers so it's a little more compact? I couldn't get it to work on my game
you are the best
Thank you. That is quite nice to say.
Thank you !
You're welcome!
Awesome video, thanks a lot !
Could you do something similar with crystal growth ?
I am considering but I also found out that the crystal growth devices are changing in 1.20. So it may be better to wait until after the new update comes out before doing a new series on AE2.
i was so confused why mine wasnt working... it made the finished circuit but never exported it back to the system i found out after rewatching ure cable connections to the pattern provider were different so i moved them 1 block now it works x.x thanks for the guide
Glad that it is now working for you.
hey i followed the tutorial, and it worked on other versions, although im on 1.20.1 and it seems that my inscriber make the following circuits but they don't get output to go to the final inscriber and i can't get it to work, any ideas?
Greetings. Usually the primary issue would be not setting the storage buffer correctly or the export buffer that is used to return the completed circuits to the inventory. I have tested this in 1.20.2 before and it does work.
Thanks for the video! I tried to do this in 1.18 and im having trouble where the crafting computer will not craft the items. I see that one of the front storage buses is empty (One connected to silicone printer), could this be an issue?
Or do I have to do something with the ME interface because that is empty too?
Greetings. Hard to say exactly what the issue is. The storage buses all need to have the correct raw and processed items in them to allow movement. The export buses also need to have the correct item set for those to move items as well. Then the crafting pattern also needs to identify what raw items need to be sent to the auto crafter.
for me this works for the first prozessor, after which the whole thing just breaks and doesnt get recources to build the other ones
Hey!
I'm having issues with it staying on 'Scheduled'
Do you know how I can fix this?
same here
same
Usually that means you are not sending the created item back into the system. Might check to see if you have the processers set on the export bus.
I did everything properly and its not working do i need the crafting monitor as well and whats that on the back of your me controller
Yes, you do need a crafting processor to make the auto inscriber work as the crafting processor is needed to process the patterns.
MUITO OBRIGADO PELA AJUDA
Glad that I was able to help.
it's work on 1.16.5 ?
Thanks a lot
You are welcome.
Oh no it doesn't work for me (1.19) ! 😭😭 Everything is perfect until the final product stays in the last inscriber. Any suggestion ?
Thx you help me make a storage component factory
Glad it helped.
Does this work with Advanced inscribers ?
I don't know, but if they work the same as the normal inscribers so it should work.
processors are not extracted into the ME system, everything was done exactly as in the video
same mine will stack up in that final place until there’s a new type they don’t flush out
Greetings. Did set the storage bus behind the top middle inscriber to hold the 3 completed processors and put the 3 completed processors into the export bus to export the finished processors?@@annasmith5216
Greetings. Did set the storage bus behind the top middle inscriber to hold the 3 completed processors and put the 3 completed processors into the export bus to export the finished processors?
the printed silicon doesn't output for some reason, I replaced the inscriber and the export bus, the storage bus, and the quartz fiber
same
@@LudiStack so you need an me interface hooked up to the pattern provider. It wasn’t clear in the vid
@@TheLaziestOfNerds thank you for the answer!
I managed to fix it like 10 min ago after everything within the machinery seemed to break😂
Glad you found the issue and was able to have it work.
I don‘t get it, I’ve done it in the exact same way, step by step but it doesnt work 😢
Might need to see if you set the correct items in the storage bus's and in the export bus. If those are not set correctly then the items will not flow.
I did everything like the video, as if I had copied a schematic, and I have no idea why nothing came out
Circuits can get stuck in top middle inscriber, something is going wrong.
Most likely your storage bus is not set correctly for holding it or the export bus has not been set to return the finished circuits to the crafter.
i tried like 6 different tutorials all dont work
doesnt work ( doesnt show the patterns in crafting terminal )
does this work for 1.19.2?
yes
@@withamtimbo66 thanks for the response. then i definetly did something wrong. as it didnt work for me lol
Greetings. yes it does work in 1.19.2 as I had made the video in 1.19.2. It is the same design that I had used in 1.18 as well. If you find an area to be unclear, please let me know.
does this still work in 1.20
I have used it in 1.19.2 and it still worked. So unless there were some major changes in the mod between 1.19 and 1.20 then it should still work.
@@doublepixel4210 I probably did it wrong but its registering the 8 channels but it's not sending the items in the inscribers
@@spencerx5176 If the inscribers are holding onto their items then it may be the storage buses on the back are not set to hold the created inscriber item. I will have to set up a 1.20 world to test to see if this has changed in the current version and how to modify the design to work.
@@doublepixel4210thank you i will check them all again when i get home thats for the help
@@spencerx5176 I am going to start up a new world to test AE 2 on 1.20.1. Please join me on my twitch channel: www.twitch.tv/doublepixel42 and you can see me test this live so we can find out what works, and what doesn't.
it's not extracting the final item back in storage
You should have an export bus on the side of the top inscriber set with the 3 pressed circuits and then an export bus set with the 3 completed circuits attached to the original pattern provider.
@@doublepixel4210 I had done that. I think the issue was too many channels on one cable. Not using Dense. So I separated things around and now it seems to be working fine
If you have too many channels used then you missed a quartz fiber that would separate the lines. There were 2 places that I had used it to isolate one mini circuit for the silicone processing and one on the top of the first inscriber to keep it from being read twice.
@@King_Georges_Calcified_Elbow
Just doesn't work for me no items are input into the inscribers
You might want to check to see if you have the storage buffers set correctly for the items they are supposed to hold. That and make sure you put the quartz fiber in the correct locations so you don't have too many devices on a single line.
hmmm This does not work. Channels are busy.
5 storage bus
1 ME interface
2 exports bus
1 power chanel
Total 9, but maximum channels 8
May have added an extra cable somewhere. The inscriber that makes the silicon template is on its own network. Might need to pause the video in different areas so you can compare to the build.
@@doublepixel4210 Thanks for the answer! But I have already changed the system to Chests, hoppers and use e/i bus!
hey i did this on ATM6 and i have a problem it says "no crafting cpu avaible"
It means you need to make a crafting processor first. You need that before the system can know how to handle the patterns. I believe it's a crafting cpu, coprocessor and crafting display for the simple crafting processor.
I got a Problem in ATM 9.. it says that the Printed circuit would miss. When i put the patter in the Pattern Provider it say that i need like 50 presses🫠 help?