Thanks bro! I really appreciate it 😁 yeah, those electronics are a lot heavier! I think it's time to gear up, maybe try a 22 tooth pinion haha (it was running 17)
Matt a great piece of kit to invest in is a air compressor, cost around £100 English pounds and are a god send for us RC guys, just give your cars, trucks a good blast with compressed air after each day of use & keeps your RC collection looking like new still. I have used one for many years & wouldn’t be without mine. Stay Safe Matt 🤜🏻🤛🏻
@@MatthewSimm tbh mate probs a bit of both lol.. I like to fix things up but also like to get them out the box as I am thinking of building a 6s M/T next year tho man
infraction? dumborc is fricken amazing. it lacks end point adjustment i would recommend the radiolink rc4gs v2. awesome distance and fully programmable radio.
I now like to use an air compressor am a small brush, after every run u just give it a quick blow down and sonetime I use a bit of tyre shine on a cloth to make the plastics looks new again
I'm putting in a Hobbywing Max 8 G2 with the 2500kv motor, 4s, in my Slash Ultimate. What is a good gear and spur gear ratio? Nothing insane, moderate will be fine. Thanks heaps :)
I just threw in the same system on my slash 4x4 with a 54 spur and 17t pinon wondering whats a better gearing too go faster right now I tried it on 3s and it felt slower than the vxl on 3s
i haven't played around a lot with gearing however, id just start of small, try 19, then go to 21 or 22 etc.. but, be sure to keep checking your temperatures. the stock vxl uses a 13tooth so it will have more accelerating.
@@MatthewSimm yea I just tried the 21t pinon with the stock 54 spur on 3s and it felt like my vxl 3s on a 13t pinion not even close to the 19t pinion it comes with I need more juice. What gear setup where you running it seemed allot faster on 4s which is less juice but im guessing the 6s battery is heavier
Hey, just curious, other than the spur gear did you have any upgraded gears in your drivetrain? I want to swap mine to 6s but not sure if my drivetrain could handle it
Hey dude, its completely stock, handles it fine, although I'd actually recommend 4s over 6s, 6s is alot more weight and if you don't plan on running a big pinion for those high speeds, then 4s will be better just my opinion dude, have fun 😀
Didn't have space to test the range to the max but got 300 yds without a problem, that was nice,my TQ had some issues, at 100' I'd be walking to reconnect not anymore...
What chassis is this? I don’t think this would fit in the regular slash 4x4 chassis because the motor, esc and servo are all in a row and stuff would need to be rearranged to fit.
Bro your videos are starting to get so enjoyable, I do think those heavier electronics are weighing it down a little but it’s still crazy fast!!!!!
Thanks bro! I really appreciate it 😁 yeah, those electronics are a lot heavier! I think it's time to gear up, maybe try a 22 tooth pinion haha (it was running 17)
Matt a great piece of kit to invest in is a air compressor, cost around £100 English pounds and are a god send for us RC guys, just give your cars, trucks a good blast with compressed air after each day of use & keeps your RC collection looking like new still.
I have used one for many years & wouldn’t be without mine.
Stay Safe Matt 🤜🏻🤛🏻
Dude! That battery is massive!
Maybe not the best idea for speed running, it’s heavy as well!
Congrats on 1k subs!!!!!!
Thanks bro 😀
Nice speedrun bro!!! Congrats on being so close to the 1000 subs mark💯😊 Thats awesome keep up the good work😜
Thanks Josh 😁
Great video I hit 120 km on VXL 3S my last video About to shoot another video tomorrow showing that it has more in it on 3s
Another great vid Matt. Looking forward to the new rig.
Thabks Paul 😀
Great vid, love the enthusiasm. Just finished my own super slash, to take my buddy out of the top spot on the podium. I'm predicting 120, but will see
Hahaha well done man I'm interested in this project you'll definitely have the road space congrats on the 100👊
Cheers mate 😀
Mate u made that build look easy as hell haha..
Also that's a beast now man I wanna build a 6s but not sure wot yet
Thanks dude! 😁
Would you buy a new rc or turn what you have into a speed car?
@@MatthewSimm tbh mate probs a bit of both lol.. I like to fix things up but also like to get them out the box as
I am thinking of building a 6s M/T next year tho man
infraction? dumborc is fricken amazing. it lacks end point adjustment i would recommend the radiolink rc4gs v2. awesome distance and fully programmable radio.
id love an infraction, one day! and i decided to g o with a RadioLink RCG6S v2, super excited for it, i just ordered it haha
The phone is probably creating the flat surface that causes the up force causing it to flip
a little bit yeah, but i have a gps now haha
Nice to think I was an og subscriber when you get massive!
Thanks bro 😊
Awsome mate perfect perfect perfect magnificent video thing can definitely move 🔥🔥👌👌😃🔥👍💣
Glad you enjoyed it 😀
What's the goal setup your using?
I’m about to do this to my slash
Nice dude!
Where are you in Australia brother? Keep Vloging nice Content! Good bless you
Mildura dude 😀
Thanks heaps, I just subbed to you!
Wow how do u keep ure Rc cars so clean
I now like to use an air compressor am a small brush, after every run u just give it a quick blow down and sonetime I use a bit of tyre shine on a cloth to make the plastics looks new again
I have one 4076 2200kv and i only run 4s change all the bearings and after 10, 15 min run the motor is very hot and is new 😫 run 18t pinion 54 spur
I have the same pair of socks
I'm putting in a Hobbywing Max 8 G2 with the 2500kv motor, 4s, in my Slash Ultimate. What is a good gear and spur gear ratio? Nothing insane, moderate will be fine. Thanks heaps :)
Hey dude, hard to tell but I'd start off with the stock gearing, see how you like that, and go up from there.
@@MatthewSimm Ok, will do, thanks :)
Which pinion you had use
I just threw in the same system on my slash 4x4 with a 54 spur and 17t pinon wondering whats a better gearing too go faster right now I tried it on 3s and it felt slower than the vxl on 3s
i haven't played around a lot with gearing however, id just start of small, try 19, then go to 21 or 22 etc.. but, be sure to keep checking your temperatures. the stock vxl uses a 13tooth so it will have more accelerating.
@@MatthewSimm yea I just tried the 21t pinon with the stock 54 spur on 3s and it felt like my vxl 3s on a 13t pinion not even close to the 19t pinion it comes with I need more juice. What gear setup where you running it seemed allot faster on 4s which is less juice but im guessing the 6s battery is heavier
Keep it up! Awesome 😎😎😎
Thanks dude :)
I did the same thing to my ultimate what else do you think I gotta upgrade I put metal spur and metal driveshafts
Good job with that slash it seems like it will be really fast but you definitely should get a gps speedometer rather than using your phone lol
Most definitely haha! I will be getting one soon, I keep forgetting to order it hahaha 🤣
Awesome
Thanks Leroy 😀
Lol i dont have much fun breaking stuff i cant relate
Nice swap tho
Hey, just curious, other than the spur gear did you have any upgraded gears in your drivetrain? I want to swap mine to 6s but not sure if my drivetrain could handle it
Hey dude, its completely stock, handles it fine, although I'd actually recommend 4s over 6s, 6s is alot more weight and if you don't plan on running a big pinion for those high speeds, then 4s will be better just my opinion dude, have fun 😀
Hey just got a few questions I got a new platinum what do I need to make it handle the 6s system
Another review of the DumboRc ain't a bad thing programming one is a plus...
Illnsee what i can do :) I've been meaning to get one for a while
@@MatthewSimm got one on my rustled xl5 with a 2s...more punch out of the hole to start....big 😃 😃
@@mattreetz3361 what about the range? is it as good as some claim?
Didn't have space to test the range to the max but got 300 yds without a problem, that was nice,my TQ had some issues, at 100' I'd be walking to reconnect not anymore...
What chassis is this? I don’t think this would fit in the regular slash 4x4 chassis because the motor, esc and servo are all in a row and stuff would need to be rearranged to fit.
It's all the same, everything is interchangeable 😀 I've tried it.
Put on the body u will go way over 100
I only had the body off because last time I caused a smoke show haha
If u want the ultimate range on a budget order up a radiolink
Cheers mate, ill take a look!
Wait a second that looks like a fauxxas lol
Waw👍 nice 👍👍
Thanks 🤗
Clean the cars before change the Electronic
Traxxas Hoss 🤔
Bro can I pay u to help guide me through buying and installing my first brushless motor system in my ecx amp mt???? I'm new and need help
No need to pay me dude, spend that my on rc parts haha, message me on instagram and let me know what you need help with 😀
@@MatthewSimm is your ig Matthew sim?
Nice video, but for the love of God please clean that RC.
8s? Hahaha
120mph, not kmph
Can we guess multiple times?
Just the once :)
Traxxas or arrma
It could be anything haha
Then it is a Arrma outcast
wtf lmao this video has 4k
that moment when you realise the phone has a crack in the screen after he drove it
had a crack before too haha... i think