ฝัง
- เผยแพร่เมื่อ 31 ม.ค. 2021
- In this video you will learn how to install a decorative plaster cornice. For this project we used the @KnaufAustralia 'Sydney' 90mm cornice for our installation. To learn more about this product please visit - www.usgboral.com/en_au/
TOOLS FOR THIS PROJECT BELOW -
Stanley Plaster Saw - amzn.to/1TeVM3V
Utility Knife - amzn.to/1SaFrwe
Hammer - amzn.to/1QXfwbf
Tape Measure - amzn.to/1NIY2sY
Plaster Knife 12" - amzn.to/1TeVTMQ
Plaster Knife 10" - amzn.to/1RkC7Az
Plaster Knife 6" - amzn.to/1TeVF8h
Mud Hawk - amzn.to/1QXdiJ9
Ladder - amzn.to/13EEvey
More videos and action coming each week. For more visit - renovationjunkies.com.au/ and follow along socially below -
Follow - RENOVATION JUNKIES - For Ideas and training.
Web - www.renovationjunkies.com.au/
FaceBook - / ...
Instagram - / renovationj...
Twitter - / reno_junkies
Follow OurBuild -
ourbuild?h...
/ our-bu...
/ ourbuild
Thanks Guys, any questions please leave them in the comments below.
Cheers, James. - แนวปฏิบัติและการใช้ชีวิต
Its nice cornice that. All the new builds use shadow line system but its a bit of a pain to paint. Give me old fashioned cornice.
Agree mate. We went P50 shadow line in our last reno to go for the modern architectural look, but to be honest I prefer this as well.
i realize Im kind of off topic but does anybody know a good site to stream newly released series online?
@Kristopher Alexis i watch on Flixzone. Just search on google for it :)
@Kristopher Alexis lately I have been using Flixzone. Just google for it =)
@Kristopher Alexis i would suggest flixzone. Just search on google for it =)
An excellent demo and lesson.
You made it look so easy, it showed your 'skill level', and professionalism
Well done to both of you.
Great tutorial, thanks for sharing! EPS plaster-coated coving is absolutely the way to go for DIY jobs. It's budget-friendly, moisture-resistant, easy to install and paint. I've used Homemerce for coving and trim in my whole house - top quality, huge range of styles, and the best value around. Everything they sell is meant to simplify DIY projects and provide a high-end finish.
Good job,I'm a plaster in morocco that's a nice work good luck
Plasterer a top bloke. Great video
Great work! Some good tips! Small tip from a plasterer to a fellow bro plasterer! Try a gauger trowel instead of the plastering trowel, easier & quicker to lick the cornice with the mud!
Ha. I know the apprentice Benny. He worked with us quite a few years ago now. Good to seeya back at it mate. Me and my Mrs do it on our own now. Geez that manly/sydney cornice is a bit of fun. Lol.
Good aussie bloke benny but mate have you ever heard of deodorant 😮😅
Very clean workmanship.
Hi James, nice video. I’ve muddled my way through installing a fair bit of 90mm Sydney cove cornice on a large owner build project. This included two challenging rooms that had walls at odd angles ( both 112.5 degree and 67.5 degree corners ) but also raked ceilings at 30 degrees. Took me a while to work out the correct way to joint the corners so they looked perfect, this involved small wedged shape pieces in the corners to adjust for the odd angles. Anyway my question re your vid. You say to mark down 90 mm on the wall. Wonder if this should have an extra couple of mm added to account for the cement thickness. Obviously a 90mm cornice will project onto the ceiling and walls by 90 mm plus cement thickness. I assume if you do an exact 90 mm mark on the wall and put a nail in at that point to sit the cornice on , then you’ll end up with a slight rotation of the cornice getting more than 90 mm projection onto the ceiling but importantly the corners won’t exactly align. Cheers.
Nice work. And so much better than all the American ones with all that feet and inches nonsense 😂
Now i know what is cornice..thanks for sharing this video ..i like it..
Great informative video
Great video ! Thanks a lot !! Quick question, I need to install a plaster cornice but the wall is in Brick. What would you recommend to hold it in place during the drying time ? (considering I may not want to actually drive screw into the brick wall everywhere, looks a bit tedious)
This is awesome, thanks so much. Don't mind taking the extra time to get it right, what's a few hours compared to the lifetime it will look good? Top video and very clear, thanks for the real, constructive help!
Thanks guys first class job bob uk.
This is good shit; I need to do one wall of cornice at home and hopefully wont make too much of a mess after this vid
Only 1 wall, what happened to the other 3
Very nice video sir.. Thank you for sharing 😁 keep safe always 😁😁
Cheers mate 👍
Which brand of mitre box do you use ?
If you are marking out using your coving offcuts at the start - doesnt this rely on a perfectly level ceiling? shouldnt this be done with laser level so that the bottom line of the coving is true level. Any discrepancies can be made up against the ceiling where everything will be painted white ( usually) . Im looking at a big renovation job as a DIYer so this video is great thanks!
Hi was wondering how I would do this on a tiled wall? Obviously I can't drive screws in to brace the cornice
Don't be a clown, use sky hooks, u great galar 🎉
I am randomly looking around to find home repair vids. Just in case the Poop show in Texas turns bad. So far no busted pipes for me. Anyways, I had to do a double take because you kinda look like an actor called Grant Bowler lol.
You’ve confused me on the long & short points. Does long go 20 to nothin or does the short?
20 to nothin.... 🤣🤣🤣 Stick to test tube mixing mate 😄
It's Witch Craft, I've never been able to get it right. Thanks for the vid.
I agree mate, it takes practice over and over again
The guy in the pink shorts is just so cute. Nice info also
Very slow way if doing it.laser measure two short ladders and a plank to cut on and a tapepro cornice head will speed thing up about 50%
Agreed mate, most professional contractors would have that gear, but for the average person looking to DIY they are only going to have the basic tools.
You've shown a very informative and basic, but true, installation of cornice.
Some people forget, learn the 'old ways' first, then, if you ever have issues with the new way, the 'old way' is always the solution.
Excellent workmanship all round, from the explanation, fixing, and filming
That process is way to slow for me,be there all day
must be expensive install
He installed it upside down. lol. A cornice like this should be oriented as a cyma recta, but it was installed as a cyma reversa. Most people won't know the difference, but it's not correct according to classical rules and tradition.
Wrong
@@OurBuild nope, I've installed miles of moldings and read dozens of books on classical architecture. Look at any book on the classical orders, the final molding, the cyma, is a cyma recta. It's either upside down or you installed a molding that isn't a cornice. If you like it, then who cares? Either way, it's not traditional.
@@CheeseBae Well if you're installed miles of 'Sydney 90mm' cove by Knauf then you've installed it upside down - www.knaufapac.com/en_au/products/cornice/decorative-cornice/sydney-90mm-profile-decorative-cornice.html
@@OurBuild fair enough, you installed it according to the manufacturer and have an excuse, but it doesn't change the fact the manufacturer designed something that is historically incorrect. Not surprising as 99% of modern manufacturers have no understanding of classicism.
What's with the large tool belt and professionals will do a mitre joint in the middle of a long run and not a butt joint,!!
Where was the butt joint??
Pink shorts n white socks,nooooo!!!!!
This method is so slow 😂
Yes but its by the book 😉
the answer at 1:39 made no sense at all, sorry