Getting the Most out of Bilt Hamber Touchless and Touchon
ฝัง
- เผยแพร่เมื่อ 15 มิ.ย. 2024
- Bilt Hamber Touch-less
tinyurl.com/534hn4r8
Bilt Hamber Touch-On
tinyurl.com/mw93d968
Try code "forensic" for 10% not sure if it works with all products.
----------------------------------------------------------------------------------------------------------
MY CAR DETAILING COURSE COURSE - CAR DETAILING FUNDAMENTALS - IS OUT NOW!!
The Forensic Detailing Channel special offer price is now £39*, (usually £249*) just follow the link below and use launch code: FORENSICDETAILING (if it doesn't embed automatically with the link).
This price gives you access for 60 days, but annual or lifetime purchases are also available.
*Prices may vary depending on which currency you use but discount percentages are the same. Discount will be applied automatically at checkout.
ioa.pxf.io/c/2687409/1012495/...
----------------------------------------------------------------------------------------------------------
Become a Forensic Detailing Patreon for exclusive product reviews:
/ forensicdetailing
----------------------------------------------------------------------------------------------------------
Facebook: Forensic Detailing Channel
Instagram: @forensicdetailing
Twitter: forensicdetailing @rover8200
My Vlogging Camera
amzn.to/2YncEhP
My Main Camera
amzn.to/2V9puhN
Bargain £1 Mini Inpection Torches
amzn.to/2Hu9Eo9
Bargain Amazon Wash mitts
amzn.to/2Wp2xFg
Recomended Products
**TRY DISCOUNT CODE FORENSIC FOR 10%**
Pre-Wash Snow Foam
tinyurl.com/y8xnhp2l
Shampoo
tinyurl.com/ybk8guwb
All Purpose Cleaner
tinyurl.com/ydxd2orh
Fallout remover
tinyurl.com/yatmso96
Tar and Panel Cleaner
tinyurl.com/y9ttdbqb
Clay Bars
tinyurl.com/y7ggze7z
Clay Lube
tinyurl.com/ycu4stm3
Paste Wax
tinyurl.com/ycy629nb
Drying Aid/QD Concentrate
tinyurl.com/ya5ralad
Sealant
tinyurl.com/yagvpxxe
Detail Spray
tinyurl.com/ydamwfs8
Water Spot Remover
tinyurl.com/y9wczlco
Tyre and Trim Dressing
tinyurl.com/yb6fopsj
Machine Polishers
tinyurl.com/ybpsrvjj
Polishing Pads
tinyurl.com/y8j8nhsp
Polishes
tinyurl.com/y9yd5zzx
Panel Wipe
tinyurl.com/y8vcnxj3
Microfiber Buffing cloths
tinyurl.com/yaau8m97
Twisted loop Drying Towel
tinyurl.com/ybr3nhmp
Mini Plush Drying Towels
tinyurl.com/ycykoxep
Wash Mitts
tinyurl.com/y7vqlx74
#forensicdetailing #detailing - ยานยนต์และพาหนะ
![เกิดใหม่ทั้งทีก็เป็นสไลม์ไปซะแล้ว ซีซั่น 3 - ตอนที่ 59 [ซับไทย]](http://i.ytimg.com/vi/GmW4a8prWUQ/mqdefault.jpg)
I'd love to see a bilt hamber factory tour or interview. I'm amazed that in today's world there's still a company that constantly pushes into development of (quality) producs rather than marketing, they would deserve that
I think brands like ADBL, Shiny Garage, CleanTech/Cleantle, Deturner, FX Protect, etc are doing the same.
Used touchless today on my golf which after 2 weeks of piss awful weather was filthy. Absolutely brilliant stuff took virtually all the dirt off and made washing so easy.
John thanks again for the information. Like the free bottle hack 👍. Glad to hear you can use over ceramic coating and asual very well explained. Answered every question you could have great video. 👍
Another great video Jon, I tried Touch-On in a snow foam cannon after washing my car with Autobrite Magifoam and Purple Velvet shampoo and didn't have any problems. I was quite impressed with it.
Broooo you confirmed my insane suspicion this morning!!! I had to crack a brand new gallon of touchless in between washes today and the last two Washes of the day had thicker suds & better cling!! I was pleasantly shocked!! That was the thing I didn’t enjoy about the previous version of touchless, just a smidge to runny to last effectively as a mobile detailer here in Carlsbad California.
I used it for the first time today, amazing results!
I'm just about to get touchless so this help out alot, first time buyer too so hopefully it lives up to the hype
I did notice my last bottle of Touchless foamed more. Thanks for explaining!
Nice one Jon, loving the hack 👍🏼
I like to work one panel at a time, and I do like to make one small exception when using Touch-less on a vehicle and thats to make contact with a detail brush on emblems, rubber trim, glass, etc and even use a magic eraser on the glass and side mirrors during the normal dwell time, before the rinsing off. This then allows Touch-on to bond better in those areas, incredible finish on glass with only Auto QD to finish up later on in the detail
I find BH Touchless so insanely good at pre washing that my quick washes consist of just touchless then a drying towel. i know this as I have always had spotless clean rinse buckets numerous times and by the feel of the paint.
As long as the wax keeps the dirt from sticking it always all comes off.
I dont get that with any other products. So good.
Great video.
Here's a suggestion for those who want a thicker foam but retain the properties.
When mixing your lance, add 10 ml of a thick foaming soap like Magifoam or Chmical Guys snow foam. I've found that it worked for people with low pressure machines and pump sprayers to get a better foam. Just remember that it's not about getting whipped cream on your car, the foam has to be able to slowly migrate down the sides of the car. For this reason, also remember to give the adjustment knob a few clicks when you start by foaming the roof to thin it out a bit there.
I'll definitely be trying Toughless when my current snow foam runs out 👍🏻
When I use Megs HCW in a wet manner (I use a noodle mitt rather than spraying it all over the place!), I finish by spending 1 min on the windscreen with a clay mitt. Get's off the over sprayed product and makes the wiper blades silent! I'm going to get some Touchless soon as my Auto Foam is almost run out. I'll skip the Touch On, purely because I am happy with Megs HCW (dry application base layer or wet application, spray off).
No tried it but i’ve been meaning to - looks awesome. I’d use the leftover in a bottle for wheels i think especially in winter. What is inside the sachet i.e a liquid or a gel or a powder ?
I'm a novice detailer but learning quickly from your channel. I had never heard of BH products before but am now using them and I'm very impressed. Getting low on Touchless so I will be interested to see if the next lot performs differently for me. I will definitely be trying the Touch-on as well. Keep up the great work.
I brought touchless recently. I think it maybe the tweaked version. I usually like a thinner foam as easier to rinse away from the car and drive. But this surprise me with how easy it washed away even with it being quite thick on application and was still effective pre wash.
Event at 2% PIR it instantly reacted with dirt on the tyres almost like an APC. Which is usual for a snow foam. I don't think auto foam does that a 5%. However it was only summer dust so can't really make a judgement on the cleaning. Its does smell like Sugar soap from a DIY store, which make sense as it is a sugar based product.
Fantastic review as always thank you
Can I ask if if this process can be added with Auto QD.
You can use auto qd afterwards
Thanks for this, Jon! I'm going to have to research sources of *Bilt Hamber* products over here. All the best from Switzerland, Rob
Great idea about making up the bottle after. I’d just say that apparently it doesn’t keep for ever once mixed, Bilt hamber recommend no more than a month I believe
Just bought a pet drier off ebay. Haven't seen you review these yet....wonder where you stand with them...the ultimate way to keep the swirls at bay? Love the content Jon. 👌
Great info on Touch On and nice hack 👍🏽
I'd like Jon to dig a little bit deeper and explore how to maximise B.H products and testing to see the difference. Seriously good stuff- favourite product (might have guessed somehow). My method- Touchless on dry paint, B.H shampoo then snowfoam Touch-on as an LSP, dry. Perfect and protective results every time. Occasionally I'll use Autogylm ceramic detail spray (got for free £20 Halfords voucher with my car insurance using Confused and another £20 Halfords to buy more detailing tools from my house insurance too 🤫). Can't knock B.H a superb brand and proud its British. Thanks to Jon for being their product champion otherwise I would never have got into loving this brand. 🙏
Hi mate, this is an unrelated question, I think
... I wash my car very rarely due to time constraints and it gets covered in bugs due to high mileage done in the country side also covering the car in mud. As a pre wash I've been using the BH touchless with a touch of BH surfex hd mixed in a snow foam lance. Question is, is that an overkill for a pre wash or acceptable, essentially am I wasting one or the other product by mixing them together in a snow foam lance? Cheers John, much appreciated the content you release !
John that sachet stuff wauld you rate it better then gyon wet coat because I tuck your advice on it few months back & I love the stuff
The built hamber stuff is all amazing but the touchon stuff I have been using for about 10 years. It was sold as wetwax2000 £25 for 25 litres of concentrate that I mix down 50:50. Its actually a product designed for car washes where the car is rinsed before it goes under the big blow dryer. It leaves an amazing shine and after applying and a really low pressure rinse the car is almost dry the water just runs off.
Fantastic informative video John, thanks for always being so honest. Bilt Hamber really does take some beating.
I thought I’d got my pir wrong somehow, because I’ve been getting really good foam with the touch less compared to what others have been experiencing. It’s a great product and does exactly as it should and, it’s very well priced. I’ve not got round to using the touch on yet as I’ve not long waxed my own cars but, the next wash I’ll give them both a go. Love the double speed wax my vans never looked so good! coupled with the bilt hamber QD as a dying aid mixed at 10-1 mixed with RO water
What equipment are you running?
Lance, HP washer, pressure, l/hr? Also, what ratio of product to water are you using in your lance?
What I do is not economical, but I like it. First , pre wash with Touchless. Then contact wash with auto wash. Last but not least Touch On in the foam lance and pressure wash off. Very satisfying.
I’ve gone through your video list and can not find a video on engine bay detailing. Can you do one please ?
Loving the new touchless however i cant say the same for touch on.. The water spots from rain are considerably worse on my black car vs using koche chemie protector wax, same goes for slickness... I could feel straight away while towel drying the paint was alot more grippy, and near instant water stains on windows after rinsing the product and towel drying, maybe its me so user error but ive gone back to koche chemie as nothing for me has beat it
Two great products and another nice helpful video 👍🏽 what is the current recommendation for a snow cannon? I’m looking to buy one (hopefully to fit my Titan (Screwfix) pressure washer) 😎
mjjc pro v2 mate
@@ForensicDetailing I’ll get me one and hopefully I can get it to work with my pressure washer fittings. Thanks 🙂
I used touchless and touchon for the first time today because of this video. I am now an addict.
The Touchon product seems very similar to the Autoglym Polar Seal that I use regularly. I'm not sure I get 1 month protection from the product and I would typically reapply every 2-3 weeks. I would be interested in a cost and performance comparison between the two products.
It works best in a snow foam canon and for many works as a brilliant topper on DSW or any other base wax.
If you apply touch less with a lance, then rinse before applying touch on with a lance and then rinse and dry, you haven’t done a contact wash… would that still leave the car dirty?
I would probably still stick with the autoglym polar series they have been working like charm for me
Just got in from washing the car with touchless. Wasn’t particularly dirty but it was pretty much spotless after rinsing it. I don’t think I will be using anything else!
one thing i do john, is when i use these ceramic low foam products, they always say to rinse off then dry, i usally skip the rinse and go straight to drying as the coating cures you dry and then the protection is stronger
I will try this mate thanks
Hi John
I keep getting extreme swirls on black German cars.....
Quastion
Why dont people just wet sand whole car with da polisher and then 1 step polish when wanting to polish out swirls and scratches
I feel this way you dont need rotary and all that risk as well as pain in the a... Holograms
Hi Jon, brilliant video, one thing to ask and I've probably missed it. You mentioned about using touch on in a trigger spray or pump sprayer, can you suggest a ratio or at least point me in the right direction? Thanks
use the liquid the comes out of your lance and you dont have to worry about ratio.
@@ForensicDetailing Jon, unfortunately I don't have a Lance and won't be buying one anytime soon, hence me asking about trigger and pump sprayers
Jon mentioned that it can be used as a contact wash, 1 sachet to 15litres of water, I'd just make up a bucket full and decant into trigger bottles as a spray on
I don't like product on my glass so my method is Touch-Less, Auto-Wash then Touch-On via a pump sprayer.
I’m a heathen and spray my windscreen with touch on and do nothing after… and honestly have no issues with my windscreen clearing after. If anything it acts a bit like rain-x.
Would be interested if you could get a bilt hamber expert opinion on if the touch on will break down over time when you leave it in a mixed water state… I assumed that’s why it came in the sachets!
Yep. I agree. I like it on the windscreen. It acts like rain x.
I use one sachet for 3 washes. They are brilliant.
Off label question for touchless? I really like Touchless, it’s cleaning ability and scent. I have been using it at 2% in a spray bottle around the house, cleaning shower, sink, counter, etc. works fantastic and so cheap. Do you think it’s safe at 1-2% to clean car interiors? Similar to Surfex HD? Since it rinses free, good on fabric?
Not sure m8 but I would use surfex for that. Touchless is sticky not sure if it ok in fabrics
hi
is the Bilt Hamber Touch less safe to use on cars with PPF?
i love your videos, honestly you are doing 'gods work' here being a 'real life' proof laboratory. I really need to get my hands on Bilt Hamber touchless but haven't been able here in Spain. I did get 1 'dropshipper' through Amazon but i think paying 40 quid on delivery for just 1 can is really not worth it. I wrote Bilt Hamber, hope they respond.
I think at the moment its really hard for companies like bilt hamber to get the products to other coutries and stay competative on pricing. But as they grow Im sure it will happen.
John have you tested Koch chemie super foam and active foam? Don't know if you get those in UK.
no mate
I will buy 10 satchels of touch on and use it in a trigger sprayer as a spray on and rise wheel sealant. Not only is a pack of 10 satchels cheaper than a dedicated spray and rinse sealant it will last 10 times longer.
I’ve always wondered what touch on would be like if you emptied the 30ml sachet into a litre spray bottle with the rest topped up with water. Would it be like a TW dry’n’shine? Might have to mess around with some
Can’t see it being far off tbh. Probably better with less issues with smearing etc. Plus the cost of TW has gone up now.
Hi Jon, any ideas on using Touch-on as a drying aid? 5-10ml in a litre bottle?
Yer why no m8 give it a whirl although the qd at 1 to 20 works great for that
Hi ,I’ve just bought 5lt ,of this bilt hamber, touchless , and only purchased due to great reviews, I applied this at a ratio of 200ml to approx .0.6lt water ,using the Ava premium snow foam cannon, I gave my van a good coating , allowing a good 5 minutes dwell time ,anyway it came to rinsing of the foam, and tbh quite disappointed, didn’t really do anything, and my van wasn’t really dirty, I ended up in using a soft hose brush, and pressure washed as I went along , this was a much better result, and could of saved myself £30
Or just should of purchased some tfr
Heh.. I still have my S-7050 (10 wpc) from high school (and the no name speakers). Yup, power switch blown. In the early 2000’s i started buying the rest of the line, from the ads in the day, where all the units were stacked up. S-8900A, S-7200, the S-7100 and bought another 7050 to be used for parts, but it was pristine, so I’ve left it alone. I only paid $9.95 for the other 7050, paid more in shipping! I just use a cheap power switch now. Nice video, thxs for the review.
You probably won't see this Jon but I was wondering if the vonhaus orbital polisher is any good and if you or anyone else has had any experience with it. I am new to detailing and trying to get in to it and have been binge watching your videos. Any help would be amazing thanks.
go DA8 mate
@@ForensicDetailing I would but its just a bit to far out of my price range unfortunately 😕
New sub here…so what would be the best Bilt Hamber routine for a new car? Also, should I have it ceramic coated as well?
Hey jezza don't coat it if you like detailing it. It's. Long question mti answer with smartphone m8
@@ForensicDetailing absolutely no plans for ppf or ceramic coating unless you recommend it.
Hi Jon, i need some advice, finally after 6 months i should be picking up my new car next week, m340i tourer, i wont to ceramic coat it myself, iv told them not to touch the car as i will prep it myself, what would you use ?
Gyeon mohs evo
anyone know if this is good for ceramic coated cars cheers
What is the mixing ratio of touchless
How is touchless compared to Auto Foam with regards to ceramic coatings? I know Auto Foam is reasonably safe for them but haven’t found much information on Touchless
fine mate.
V2 looks thicker and seems to cling to the panel better, imagine this will give a longer dwell to give a slightly better performance, maybe?…..
looks like the Argos DA. might be ok for a light polish but not for heavy hard cuttting. extra 20 quid gets your a DA8 pr DAS pro plus.
Who is the distributor in the USA?
How do you feel about using this and not doing a contact wash after? Black vehicle and ceramic coated
U need to contact wash m8
Hi, how much product to how much water do you put in your snow foam bottle please?
Sorry that’s for the touchless.
so touchless, then autowash for the touch part, then use touch-on monthly or as needed ?? can auto wash be used in a foam cannon or bucket is best ?? would be my first time with these.... (debating gtechniq w4, w1, and the rest or Koch-Chemie gsf, with green, not sure about the spray on protection part.. ) thanks for your time. I was using regular car wash as a pre wash, with little success. living in snow and salt, this will be good for winter wash as well.
bucket best for AW m8
Given the high Ph of this product, does it destroy the surrounding landscaping? Anyone care to comment on washing outside long term impact? Thanks
Destroy the landscaping... Wtaf...
“If you’re still in the camp that pre-washing is pointless” love the ‘then you’re an idiot’ chuckle 🤭 😂😅
Hi John, would love your help. I've seen your video on how to calculate our PIR. My foam canon came to 14L. On my calculations, with the Bilt Hamber 4% it means I have to use 560ml on my 1L foam canon, correct? Were I live, touchless comes at 36.95€ per 5L, that comes to 4.14€ per foam canon. Currently I'm using LaboComestica Primus, 1:10 as recomended by them, on a price of 46.95€ per 4.5L which work to 0.95€ per foam canon. Is my math correct? Any chance you have to test Labocosmetic products? I don't find much on them but I'm loving them. Keep up the great work :D
I dont find many prewashes can work at 1:10 in the lance on heavy films. you dont need to run at 4% PIR but you can if required.
What kind of foam cannon do you have? 14 litres??? Most are 1 litre or even less.
Anyhow, if what you have is a pump up sprayer and not a foam lance, you don't need to use 14 litres for a wash - that should last you 20 washes or more unless it is insanely inefficient. I like a 3% mix for my cars and I use 500 ml of water in a lance to foam up a car, i.e a full bottle on my MTM lasts me two cars. That comes to 15 ml per wash which equates to 330 or so washings from a 5000 ml jug. Anyhow, for 3% you need 420 ml for 14000 ml of water. Unless you overuse it somehow, I'd say there's about 200-250 washes in a 5l jug for you. That's a lot of detailing...
Where are you located that makes pricing that high? I'm in Europe and pay about 25 Euro here in Denmark.
@@AB-80X 14 liters for the PIR % requested by them. I have an MTM Hydro, 1L. The 14 liters are from the video Forensic made in order to calculate the 4% dilution ratio. I'm in Portugal and here all UK products are very high priced.
I’ve used a lot of different brands of detailing products and my Arsenal is slowly depleting and being replaced with all BH products. Best value for money and in my opinion no nonsense and great results! Just look at the branding no all singing all dancing just straight to the point products.
good call. I've been exclusively BH for 12 months now and have zero complaints. The only thing I get that isnt BH is Carpro Perl as a tyre shine.
@@jamesuk9 yep I am very happy with BH products, kind of old school in the ways of marketing but quality speaks for itself but with the internet and social media nowadays lesser brands are blowing up with all kinds of gimmicks. What is your take on the auto foam and touchless? Do you have a preference?
@@fastlane2914 I prefer Touchless, simply as it's less foamy. Both clean equally well in my experience.
@@jamesuk9 GT tyre serum gets a lot of hype. Not sure if it is better than CPP though. That gets a lot of hype as well.
@@kwl189 I find CPP gives brilliant value for money and it's really resilient.. 1 litre diluted 1:1 gives 2 litres and it goes a long way as a tyre shine. For a weekend warrior like me it will easily lasts 2 years with once a week application.
I have Bilt Hamber Auto Foam and have had it for about 2 years, but it doesn't foam up anywhere near as well as their Touch-Less foam in your videos.. Am I mixing it at the wrong ratio? Is it a characteristic of the Touch-Less? Or is it just my generic foam lance not being capable of producing thick foam?
It could be a combo of a lot of things. But the foam cannon he is using is known to have the best foam out of all other foam cannons. Also if you have hard water that will lower your foam as well. The MJJC cannon that he has imo is the best cannon for foam that's out right now. If you have the money and want good foam then I'd buy this one.
Agree with the hard water shout.
Mine isn't great at 500ml in autoglym foamer
John uses a MJJC lance which uses a lot of product but also makes a lot of foam. No doubt John will also have a orifice mod you can do on the MJJC to make thicker foam as well. It’s market leading and high quality but you do have to pay for that. It’s no standard lance.
I do exactly this with Touchon. I mix 15 litres of water with one sachet in a jerry can and then use about 1.5 litres of the solution in a pump sprayer. 5 or 6 applications (6 months) per sachet. bargain!
Is it safe to use this touch the stole from every week? Wil I lose protection on my car ?
safe mate.
Is there any way to tell if you’re buying the V2 of touchless? I’m due to restock soon and would like to try the new stuff
I think the bottle is different
Buy direct from BH and you will definitely get the new version
Good question.
@@ned9344 The one Jon showed is the same as the one I have so that's not an indication.
We need a definitive answer on the V2 and when it was launched from the main man himself.
Can I ask you to please recommend a snow foam bottle/Lance as mine doesn't seem to foam anywhere near what yours does and has pretty much run off in a minute. End gets absolutely no dirt off. Thanks.
Try mixing your snow foam up initially with distilled water and then use it. I had the same trouble with useless snow foam. I live in SE England and the water is really hard. I know that you still have to put tap water through your pressure washer and lance, but it made a big difference to the thickness of my foam👍🏼
mjjc pro v2
@@ForensicDetailing thanks. Just watch your video on it so will get one thanks.
Totally forgot ratios. I’m half and half. Old cars. Doesn’t have to be scientific to the max ? Also both my 5 year old Karchers Eh Or-ing or flat out leaking. Think I need a new one. Wait these die. They’re old. Didn’t get used in 3/4 years. Have you a link to a £200 power washer. ESP one that links to your gun. The better or the two guns , thanks.
Can you use touch-on with an already ceramic coated car? Sort of as a reload?
Yes m8
Hi re touch on it says
Bucket:
Pour 30-60ml into a bucket then fill with 10 litres of water
Trigger spray:
Add 30ml to trigger bottle and top up to 1 litre with
My question is if it's fine at 30ml to 60 ml 10l in a bucket. why can't I use that on a spray bottle as would last a lot longer. What's the difference if I made up a bucket then just put it in a spray bottle can't see a problem
Just go with in structures bro. It's a fair enough question but just trust them
Does water hardness change how products work? I'm in Cornwall with very soft water. I have same foam cannon as you and use Bilt Hamber. You do seem to get s dryer foam that me. Although admittedly I have a lot to learn to get the most out of it. I'm mindful the flow rate on the cannon and the initial dilution is something i could do with improving, although I do wonder if water hardness makes a difference.
Do u have k7 karcher?
@@ForensicDetailing no. Just a Nilfisk 140.3. Is the pressure or flow a big differential? The way formulas a tweaked got me thinking of water hardness, mindful it has quite a hit on pH as well as trace elements.
The k7 whips up better foam m8 specially with mjjc pro
@@ForensicDetailing Thanks. Is that just down to higher pressures d you think?
Touch on is absolutely brilliant. Through the snow foam cannon gets it into all the nooks and crannies especially your wheels.
I find especially this time of year with autofoam/touchless/HD as a prewash there is absolutely no need for any two bucket method as the contact wash, as it is virtually clean already.
The only bad thing I’ve heard is they are on the top end of pH which I’ve also heard isn’t necessarily good too. So how do you recommend to neutralize it so you can use it as a true touchless wash?
sorry chris. but you are falling into a trap. measuring alkalinity is not a measure of a products ability to strip protection or be like more harmfull or corrosive (at best it could be a vague finger in the wind). For example pure IPA is PH7 but it will strip protection more than any car surfactant even a PH13 one for example. the industry tries to sell you a PH neutral "mild" approach to cleaning. Things that make product strip LSP are caustic materials like sodium hydroxide, potassium hydrocide, phosphoric acid etc etc... Funny enough there are tons of mild ph neutral foams that use sodium hydroxide. Sodium hydroxide to this day is use in some old fashioned paint strippers.
@@ForensicDetailing I don’t think so, no but I’m not disagreeing with you though at all. One of the channels I watch how measured the ph level straight out the bottle for Bilt Hammber Auto Foam that come to be pH 13 but once it came thru the foam with more water it pretty much neutralized to 7 then is what I was trying to get at my bad. So I was really if it would work well for doing touchless washes? Also not have to do a contact wash other then getting bugs off course because I would really prefer to do true touchless washes if possible on all customer vehicles
I'm looking for a product like touch on. What would you consider the best for applying through a snow lance? Thanks
They all work m8. I think touch on is pretty cheap. You could try polar seal or wax is dead ceramic foam.
@@ForensicDetailing thanks mate, really appreciate it.
Hi, is the touchless capable to strip down/deteriorate in any way soft99’s fusso coat? Thanks!
Not strip but all prewash or detergents slowly degrade lsp
@@ForensicDetailing Thanks for the speedy reply, just bought 10l of the touchless as I was pretty convinced by its cleaning abilities (as demonstrated in your tests), was just worried that I’d have to re-apply the coat after every wash..
Hi John. Ive just washed,clayed,machine polished,IPA wiped and its ready for touch on. Do i have to towel dry it after applying it as i bought a really good towel but it left holograms all over the car (VW Arteon) and i used bilt hamber QD at 1/10. Could i blow dry it. Thanks
hey there touch on is more a quick maintainence product. So after full prep you should use a sealant or wax really. Double Speed wax is very good for the money. then in a months time just spray on the touch on after washing and blast off and dry with a towel mate. sounds like soft paintwork so just be really gentle when you contact it.
Thanks John.
LOVE BILT HAMBER :D :D :D
That snowfoams going on like something out of ghostbusters 😂😂😂
I purchased 2 touchless from 2 differnt places in the past 4 months how do I know if I have the new one jon 😭😭
I think the latest iteration has just been released. dont worry the old one works the same really the new one is just thicker.
Can you blow dry rather than towel dry.
Thanks
yes you can. but I think when you use a spray and rinse its worth buffing out the panels a bit when you dry.
Just seen this video, going to try the touch combination, shout out to the E36 328is ❤❤ I had one and put an m50b25 inlet manifold and throttle body on it, went well! But no matter how I drove it i couldn't get more than 220 miles to a tank🤣
I forgot to add how does touch on compare to Gyeon wet coat?
I 0refer wet coat
Touchon is a great product and price point if you just want to buy a sachet every few washes.
How does it compare price wise cost per wash (I know it's a slightly different product) to Gyeon Wet Coat? We are starting to get more Bilt Hamber products here in Aus.
I think it's abput a pound a sachet here
@@ForensicDetailing yeah you said the price of the Touchon in the vid, i meant cost per use compared to a bottle of spray on product like Wet Coat. I gues you'd use 1/4 of a bottle of Wet Coat each time you used it once every few months or so.
Gyeon wet coat is good stuff but pricey to use the way Gyeon intend you to use it and it doesn’t get the best durability either doing it their way.
@@kwl189 I got 6+ months out of it doing it their way. It was ready after the wash on the 7th month.
@@fordyford I’ll never know how you get that durability out of it. Nobody else I know gets that length of durability out of it but if it works for you.
If i want to use surfex hd in 1 litre snow canon what would be the correct ml of product to use in there to achieve about 4% PIR?
See how to calculate pir video
@@ForensicDetailing thanks but isn't surfex meant to be diluted much less than touchless? Or is it the same?
So, Touch-less, then Touch on, or Touch-less, Autowash the Touch on? Thanks.
generally TL AW TO
I see jon can wash the car in a hour , I struggle to do it in 2 hours , it can take me nearly 3 hours if I’m doing the wash , wheels and tyres , drying and tyre and trim dressing, I don’t Know why I’m so slow , when I’m doing a contact wash then I find that once I’m washing the last side the other sides have already near enough dried so recently I been doing it in sections and rewetting the clean sides with water if it’s drying
Same here mate.
Me too buddy... 3 hours is normal rate for me... I try to cut corners here and there but the car is not really clean. 3 hours is normal if you want clean car IMHO... aaand I`m not slow... :)
1 hour is mind blowing, 90 minutes minimum, just to wash the wheels, snow foam, contact wash and dry for me. Add in some QD and a glass clean and there's 2 hours gone as a bare minimum.
Thank god it’s not just me , I seen videos of mobile detailers who say they do the inside and outside in a hour , I don’t know how true that is , if I’m really quick then I can maybe do inside and outside in 3 hours but even that might be pushing it , anyway thanks for the feedback as I thought It was just me , however when I’m doing it then I’m not working slow
And me, I always guessed I was just being thorough.
How can I telll if a bottle of touchkess is the Version 1 or Version 2 .... I know the PIR ration halved but thats nont onvious unkess you can pick it off a shelf to read it which isn't always possible
I think it's all new now. Ask seller if not 💯 sure m8
@@ForensicDetailing .... Its stuff advertised on-line Jon by Auto Parts, they mainly specialise in car parts but gave a decent detailing section on-line which I can collect as my local shops only a few miles away only they don't stock it in the shops
@@petersmith7126Touchless is a high demand product that sells very quick, by now I doubt that any seller has the Old Formula still in Stock.
Hi Jon, I’m Looking for the best way to remove debris from my paint, every time I wash my car the paint feels ‘gritty’ I have tried auto finesse tripple but it fails to remove the grittiness? Do I need to clay bar my paint ? I have never done it before and am hesitant 😟
Yes m8 clay bar
@@ForensicDetailing gulp ! Have you done a clay bar for beginners vid ? If not, it may be worth a go 😎 thanks man
Yes m8 check fundamentals playlist on homepage
250k🥳👍🏻👏🏻
If i have 1ltr Canon and i want to achieve PIR about 4%. What is the estimate ml of touchless also estimate ml for surfex and estimate ml water?
I want to save money and want it to be more effective than using touchless on its own
50 50 typically
@@ForensicDetailing I don't get that.
So 250ml surfex, 250ml touchless, 500ml water?
My Touchless (older version) does not 'snow' at all. It seems quite runny. Is that normal? Or could it be my lance?
try MJJC pro V2 lance. and if that doesnt help put the 1.1 orrafice in it. you will have thick foam then mate trust me.
@@ForensicDetailing okay will do thanks for the reply 👍
@@fvresonanator also make sure you are putting in the correct amount of product in your lance as everyone ratio will be different because of there pressure washer , snowfoma lance and tge rate water flows through your hose
Hi John.
Thanks for another great video. Here’s an off topic question!! Just about to order a pair of Hey Dude shoes and noticed they seem to be your choice of footwear! The question is that I’m told whilst they come up true to size in length they’re a wide fit! Would you agree with this? Cheers.
Same. I bought mine almost a year ago here in Canada and it BARELY foams even with a 2.2GPM Gas pressure washer + PF22.2 foam cannon.
Great review, does it stink?
No smell m8
do the 5L versions not exist anymore? cant seem to find any, theyre all out of stock
see "new touchless" video. they made a formula change. so phase in new 1L waited for old 5l to phase out and are now phasing in new 5L
@@ForensicDetailing ah ok thanks, ill just buy a 1L bottle for now then
Make sure you use the right cannon before you get attacked 😅
How do you get a thick layer of foam using touch less
mjjc pro v2 lance
@@ForensicDetailing that is what i am using but it wasn’t thick. Which orifice are you using in it?
@@ForensicDetailing how many ml of touch less do you use in the Lance and do you fill the rest with water so you have a full 1L Lance bottle
Used touch on since it was released gets better the more you use it, bucket method not a fan of with this, but perfect in a pump sprayer
Bucket method doesn’t get the results. Canon or trigger spray/pump up sprayer does the trick.
Why squirt the diluted Touch On in to a bucket, and not just pour it from the snow foam bottle into the spray bottle?
Because the ratio will be different. Think about it
@@ForensicDetailing So pour it across and dilute if you and to.
@@wabbeybloke4175 yeah but at what ratio do you dilute it? when you spray it from the canon, it’s diluted perfectly for you to use.
The only way it makes sense to take it from the canon is if you’re planning to use it again in the canon at a different time.