Correct. And depending how you wish to fill the overflow tank, you can use a funnel or do what I do and use a 2 oz MixMizer Injector with a 6-8 inch clear hose adapter to push in 2 oz of coolant at a time. More controlled. Less mess. Also, I use black electrical tape on the line just above the Full limit and also below the Low Limit line (electrical tape covers the L). This way, I have an "At a glance" visual and I am not squinting for the nearly invisible raised letters on the overflow reservoir. Apply the electrical tape nice and neat, Two 4-5 inch strips should be perfect.
Why put coolant in with the water wetter,doesnt help unless it gets cold where your at..Even so assumeing it gets freezeing then noo water and water wetter..
I'm going to do this next week. Just ordered some engine ice.
david anthony nice it is very simple to do. Good luck 🔧🔩
So basically to top it off if it's low I only gotta take the one top panel off under the right handlebar?
Correct. And depending how you wish to fill the overflow tank, you can use a funnel or do what I do and use a 2 oz MixMizer Injector with a 6-8 inch clear hose adapter to push in 2 oz of coolant at a time. More controlled. Less mess. Also, I use black electrical tape on the line just above the Full limit and also below the Low Limit line (electrical tape covers the L). This way, I have an "At a glance" visual and I am not squinting for the nearly invisible raised letters on the overflow reservoir. Apply the electrical tape nice and neat, Two 4-5 inch strips should be perfect.
Why put coolant in with the water wetter,doesnt help unless it gets cold where your at..Even so assumeing it gets freezeing then noo water and water wetter..
Craig_sez that would be a waste of using all water wetter. lol 😂 no difference or need for all wetter
Did you measure out how much water wetter you need?? Looks as if you used the whole bottle..lol Dude chk instructions..