I recently purchased and install my BL6 pods, integrated tail light, relay, license plate light, and fender eliminator. They are great products, and videos are so helpful. My fz07 looks awesome now.
I prefer the flush mount turn signals. In fact, I just installed them on my bike. Your installation video gave me the confidence to buy them and do it myself. Now get that integrated taillight on the market.
Your relay completely eliminated my need for load equalizers, saving me the need to splice wires and find a place to hide them on my XSR900. Thanls for doing homework so I don't have to!
And thank YOU for your comment. Since I saw XSR900 I paid more attention and saw the relay you were talking about and ordered one for my XSR900 too. :)
Don't like the front signals but can't wait for the tail lights to be integrated. Next on my parts list. Also I'm more of a two brothers fan. No knock to Yoshi
Loving the work you guys are doing! Not a big fan of the prototype signals, though. Does the GTR Halo signals fit the 09, or are you considering it? Waiting impatiently on the taillight :)
We appreciate the compliment and the feedback! We have considered developing Halos for the FZ-09 but one of our main priorities for that bike is the Integrated Taillight, which is currently in development. What you could do to stay up to date also be made aware of release, is to subscribe to that listing. I'll attach the link that will take you directly to the listing: tstindustries.com/TST-LED-Integrated-Tail-Light-for-Yamaha-FZ-09-MT-09-2017-.html
Absolutely love the fender eliminator, and close out. All looks super sexy! I see it is on your website with a price. I will be buying it as soon as it's in stock. Also since you are recommending the signal pods for the rear must mean it will be awhile for the integrated taillight. What is a rough estimate on when that might be available? Also with that full exhaust, does the bike have a flashed ECU or fuel controller of any type? Or can you run a full exhaust on this bike with no flash/tune, or fuel controller?
Right now we are still very early in the design phase of the tail light but are aiming to have significant update on the release of that product by early next year. Usually a project like that can take at least a year before we see a market ready product. As far as the exhaust is concerned, it solely depends on what you are trying to get out of your bike. If you use the OEM 02 sensor and install in on the full exhaust, the ECU will try to adjust the air/fuel ratio within the manufacturer set parameters to adjust to the new system. If you are looking for peak performance, we definitely recommend going with a proper air filter along with getting a full tune.
TSTindustries Not solely looking for performance right now. Just sound and looks. So would it cause any harm or damage to my bike with a full system and the baffle out, if I use the factory o2 sensor in the full exhaust?
You should be fine as the bike will try to adjust within set parameters. Just be sure during the installation of your exhaust to unplug the battery until the installation is complete. This will prevent the Check Engine Light (CEL) to appear on your gauge cluster.
Just bought a fender eliminator and tail light from you guys. They haven’t come yet but cant wait to see how they look and work on my r6. Beautiful bike btw
Absolutely! Sharing photos with us on our Facebook or Instagram is always welcomed or simply sending us an email to support@tstindustries.com would work.
I guess you have not seen our Yamaha R3 Superbike Spec build show. Here is a link to the playlist for all last year's episodes: th-cam.com/play/PLW7p4whHAHw1IjSsJ99ciJ2rGplb7kX3r.html
im waiting for the integrated tail light, then ill buy the fender eliminator aswell wich you had a vidio on how to install the plates light too i wa to install the plates under the tail.
We're looking forward to everyone seeing the finished product. Make sure you subscribe to the listing so you are made aware of the release: tstindustries.com/TST-LED-Integrated-Tail-Light-for-Yamaha-FZ-09-MT-09-2017-.html
Maybe something about that rough prototype didn't sit right with you. We have finished and released that product and you can see a better depiction of it here th-cam.com/video/6IJVN5xzK6U/w-d-xo.html
That we do! I have attached a link below taking you directly to everything we offer for the 2017 FZ-09. If you need any further assistance, feel free to reach out to us at anytime: tstindustries.com/Yamaha-FZ-09-MT-09-2017-/
Big fan of seeing what people do and also walk throughs for when I have to wrench. I thru on these parts on my 17 FZ09 so far Ohlins Rear Shock, changed the ride completely obviously set to my weight. Graves full Ti exhaust Passenger pegs deleted with R&G delete kit. Black Ebay levers, FTCECU flash, BMC air filter GPR Steering Stabilizer I still need to get rid of those awful mirrors, turn signals, and fender still and then just add carbon parts. I bought the bike 3 weeks ago so I've got alot done quickly since I missed 2 months of riding with 2 broken feet.
Sounds like you've already made a lot of progress in the short amount of time you've had your bike. We're sorry to hear you haven't been able to ride but at least, you were able to modify your bike! Also, the parts you're referring to, we will be releasing here soon. If you want to stay up to date, make sure to subscribe to the listing: tstindustries.com/TST-LED-Integrated-Tail-Light-for-Yamaha-FZ-09-MT-09-2017-.html
Not absolutely necessary for safety of the motor but you will not take advantage of any big performance gains until your bike is properly tuned on a dynamometer. I actually recommend FTECU tuning as opposed to a piggyback fuel computer.
I can't wait for the FE to come out! I will be buying as soon as it becomes available. That big ugly fender NEEDS TO GO I like that you can see the front blinkers from the front and the side, they just need to be cleaned up a bit. I've already installed the crash protection kit and the front blinkers that you guys currently sell. I love the products that y'all put out!
Good to hear! Have you subscribed to the listing yet so you are made aware of release?! If not, I'll attach the link below so you are able to: tstindustries.com/TST-Elite-1-Fender-Eliminator-for-Yamaha-FZ-09-MT-09-2017-.html
Not a fan of those prototype signal. Just looks awkward. Those flush mount led turn signals look nice but the left one I installed on my fz07 has condensation. They work so I haven't removed them. Just thought I should let you guys know so you are aware of the issue. Oh and they don't fit perfectly, but again just a minor issue.
We do appreciate your feedback! In regards to your flush mount signals, we would be more than happy to resolve the issue you're having. Would you mind emailing support@tstindustries.com about the problem so we can move forward in resolving.
Why would you not want hyper Flash turn signals that's the best thing to have on a bike? blinking that fast people are going to notice that you're turning
Some people do like to leave the hyperflash but most prefer a flash rate close to the OEM 85cpm. We just make the parts that people want and don't dictate what they should use.
We have a few products already listed for the XSR900 and are currently toying with the idea of an Integrated Tail Light set-up. You can view our full product listing at the link below! tstindustries.com/Yamaha-XSR900-2016/
At this time, the FE is not yet available. What you could do until then to ensure you are made aware of release, is to subscribe to the listing and you will be notified when it is available: tstindustries.com/TST-Elite-1-Fender-Eliminator-for-Yamaha-FZ-09-MT-09-2017-.html
I recently purchased and install my BL6 pods, integrated tail light, relay, license plate light, and fender eliminator. They are great products, and videos are so helpful. My fz07 looks awesome now.
Thank you sir. We appreciate you. I'm so glad that you are enjoying the products that we work so hard to design and manufacture.
I prefer the flush mount turn signals. In fact, I just installed them on my bike. Your installation video gave me the confidence to buy them and do it myself. Now get that integrated taillight on the market.
We're glad to hear our videos proved to be useful! Hopefully once our tail light is released you find you way back to shopping with us. :)
TSTindustries I will if it comes out soon!
Your relay completely eliminated my need for load equalizers, saving me the need to splice wires and find a place to hide them on my XSR900. Thanls for doing homework so I don't have to!
This is music to my ears. I am so happy when I hear stories about how our parts helped someone out. Ride safe.
And thank YOU for your comment. Since I saw XSR900 I paid more attention and saw the relay you were talking about and ordered one for my XSR900 too. :)
Absolute quality at awesome prices!!!...TST is 100%!!!!!
Yasssss!...thank you.
Love what you guys do. Excellent company!
Don't like the front signals but can't wait for the tail lights to be integrated. Next on my parts list. Also I'm more of a two brothers fan. No knock to Yoshi
The wait is almost over, my friend.
Loving the work you guys are doing! Not a big fan of the prototype signals, though.
Does the GTR Halo signals fit the 09, or are you considering it?
Waiting impatiently on the taillight :)
We appreciate the compliment and the feedback! We have considered developing Halos for the FZ-09 but one of our main priorities for that bike is the Integrated Taillight, which is currently in development. What you could do to stay up to date also be made aware of release, is to subscribe to that listing. I'll attach the link that will take you directly to the listing:
tstindustries.com/TST-LED-Integrated-Tail-Light-for-Yamaha-FZ-09-MT-09-2017-.html
Very much looking forward to the integrated tail light. I had one from you for my old 2016 FZ 07 with fender eliminator and I loved it.
Glad to hear you're looking forward to the Integrated Taillight! We are working diligently to exceed your expectations.
Awesome, now I just need the bike!
So pretty much the same signals for the new MT07 2018.
Love your stuff!
Scoobs_Motovlogs yes....but we have some new type signals also coming out soon. They will probably be out by February
Absolutely love the fender eliminator, and close out. All looks super sexy! I see it is on your website with a price. I will be buying it as soon as it's in stock. Also since you are recommending the signal pods for the rear must mean it will be awhile for the integrated taillight. What is a rough estimate on when that might be available? Also with that full exhaust, does the bike have a flashed ECU or fuel controller of any type? Or can you run a full exhaust on this bike with no flash/tune, or fuel controller?
Right now we are still very early in the design phase of the tail light but are aiming to have significant update on the release of that product by early next year. Usually a project like that can take at least a year before we see a market ready product.
As far as the exhaust is concerned, it solely depends on what you are trying to get out of your bike. If you use the OEM 02 sensor and install in on the full exhaust, the ECU will try to adjust the air/fuel ratio within the manufacturer set parameters to adjust to the new system. If you are looking for peak performance, we definitely recommend going with a proper air filter along with getting a full tune.
TSTindustries Not solely looking for performance right now. Just sound and looks. So would it cause any harm or damage to my bike with a full system and the baffle out, if I use the factory o2 sensor in the full exhaust?
You should be fine as the bike will try to adjust within set parameters. Just be sure during the installation of your exhaust to unplug the battery until the installation is complete. This will prevent the Check Engine Light (CEL) to appear on your gauge cluster.
TSTindustries Awesome, you guys are the freaking best! Thanks so much.!!
wish you guys had that fender eliminator for the fz07. i would buy it, see you guys on nov16
Do you mean the low mount? We considered making one but the other versions we have sell so well we decided to leave it be.
Just bought a fender eliminator and tail light from you guys. They haven’t come yet but cant wait to see how they look and work on my r6. Beautiful bike btw
Thanks Jake and we're honored to be a part of your bike build. We can't wait to hear your thought and hopefully see some photos!
TSTindustries for sure. Is there an email I can send them too
Absolutely! Sharing photos with us on our Facebook or Instagram is always welcomed or simply sending us an email to support@tstindustries.com would work.
Super nice
Not a fan of tye prototype signals. Everything else looks great though. Personally Im a fan of the sequential signals.
You got almost all the parts to transform any motorcycle! Why don’t you start building motorcycle like motonosity, and start making a build series?
I guess you have not seen our Yamaha R3 Superbike Spec build show. Here is a link to the playlist for all last year's episodes: th-cam.com/play/PLW7p4whHAHw1IjSsJ99ciJ2rGplb7kX3r.html
im waiting for the integrated tail light, then ill buy the fender eliminator aswell wich you had a vidio on how to install the plates light too i wa to install the plates under the tail.
We're looking forward to everyone seeing the finished product. Make sure you subscribe to the listing so you are made aware of the release: tstindustries.com/TST-LED-Integrated-Tail-Light-for-Yamaha-FZ-09-MT-09-2017-.html
Is there a way to move the center console to the center?
I like the size of the front indicators but the loop at the top does not sit well with the eyes.
What loop are you talking about?
Maybe something about that rough prototype didn't sit right with you. We have finished and released that product and you can see a better depiction of it here th-cam.com/video/6IJVN5xzK6U/w-d-xo.html
Do you guys have the fender eliminator available for the 2017 fz09 with the turn signals? They look pretty good.
That we do! I have attached a link below taking you directly to everything we offer for the 2017 FZ-09. If you need any further assistance, feel free to reach out to us at anytime:
tstindustries.com/Yamaha-FZ-09-MT-09-2017-/
Big fan of seeing what people do and also walk throughs for when I have to wrench.
I thru on these parts on my 17 FZ09 so far
Ohlins Rear Shock, changed the ride completely obviously set to my weight.
Graves full Ti exhaust
Passenger pegs deleted with R&G delete kit.
Black Ebay levers,
FTCECU flash,
BMC air filter
GPR Steering Stabilizer
I still need to get rid of those awful mirrors, turn signals, and fender still and then just add carbon parts. I bought the bike 3 weeks ago so I've got alot done quickly since I missed 2 months of riding with 2 broken feet.
Sounds like you've already made a lot of progress in the short amount of time you've had your bike. We're sorry to hear you haven't been able to ride but at least, you were able to modify your bike! Also, the parts you're referring to, we will be releasing here soon. If you want to stay up to date, make sure to subscribe to the listing:
tstindustries.com/TST-LED-Integrated-Tail-Light-for-Yamaha-FZ-09-MT-09-2017-.html
Does the bike need a power commander/tune after installing the full exhaust?
Not absolutely necessary for safety of the motor but you will not take advantage of any big performance gains until your bike is properly tuned on a dynamometer. I actually recommend FTECU tuning as opposed to a piggyback fuel computer.
this yoshi ohh baby
Esse mt ficou muito linda 😲
I can't wait for the FE to come out! I will be buying as soon as it becomes available. That big ugly fender NEEDS TO GO
I like that you can see the front blinkers from the front and the side, they just need to be cleaned up a bit.
I've already installed the crash protection kit and the front blinkers that you guys currently sell. I love the products that y'all put out!
Good to hear! Have you subscribed to the listing yet so you are made aware of release?! If not, I'll attach the link below so you are able to:
tstindustries.com/TST-Elite-1-Fender-Eliminator-for-Yamaha-FZ-09-MT-09-2017-.html
Yep! I'm subscribed to just about every new product y'all are making for the 2017 lol
Sounds like you're more than ready!
Im waiting for integrated tail light
While you await, make sure you have subscribed to the listing so you can be made aware as soon as it is available.
Not a fan of those prototype signal. Just looks awkward. Those flush mount led turn signals look nice but the left one I installed on my fz07 has condensation. They work so I haven't removed them. Just thought I should let you guys know so you are aware of the issue. Oh and they don't fit perfectly, but again just a minor issue.
We do appreciate your feedback! In regards to your flush mount signals, we would be more than happy to resolve the issue you're having. Would you mind emailing support@tstindustries.com about the problem so we can move forward in resolving.
Молодцы!
Why would you not want hyper Flash turn signals that's the best thing to have on a bike? blinking that fast people are going to notice that you're turning
Some people do like to leave the hyperflash but most prefer a flash rate close to the OEM 85cpm. We just make the parts that people want and don't dictate what they should use.
Does Tst Industries sell their product on ebay?
Yes, we do:
www.ebay.com/usr/tstindustriesllc?_trksid=p2047675.l2559
Luv ya work, any upgrades for the XSR 900, the tail light on that thing is awful
We have a few products already listed for the XSR900 and are currently toying with the idea of an Integrated Tail Light set-up. You can view our full product listing at the link below!
tstindustries.com/Yamaha-XSR900-2016/
Those rearsets look awesome except for that one piece of grey. Like why put that piece in there 😂😭
The DB killer is inside???
In this particular video we did not have dB killer in the can. It was left in the box the exhaust came in.
i need these mods on my mt09
Top speed for 2017 mt09 full stock?🤔
Sorry man, we only worked on a few of these bikes for customers. We haven't had the chance to rip one around a track yet to get it to its top end.
It is factory ECU speed limited to 132 MPH (212 km/h). A simple reflash of the ECU will remove the speed limiter for you.
@@AndrewB416 212 kmh is not right, I've done 225 with mine and I think 230 would have been possible if I wanted to but anyway you don't need more
Just started the video but is the FE available yet? Lol
At this time, the FE is not yet available. What you could do until then to ensure you are made aware of release, is to subscribe to the listing and you will be notified when it is available:
tstindustries.com/TST-Elite-1-Fender-Eliminator-for-Yamaha-FZ-09-MT-09-2017-.html
you already know i been subscribed. Now hurry the hell up lol, i need more TST equipment on my bike.
does the fixed high mount retain the keyhole lock?
$500 rearsets, no thanks