TRANSPORT WHEEL TRANSFORMATION | DIY Guide to boring, painting, and installing cap clips.
ฝัง
- เผยแพร่เมื่อ 10 มิ.ย. 2023
- In this video, I will go step-by-step through how sand, prep, paint, bore, and install hubcaps on your transport wheels! To achieve this look, I used rattle can paint and Simple.Clips to install hubcaps!
Check out www.simplec10.co for parts, merch, and DIY tutorials!
Parts mentioned in the video:
Buy Transport Wheels Here: simplec10.myshopify.com/produ...
Simple.Bore: simplec10.myshopify.com/produ...
Simple.Clips: simplec10.myshopify.com/produ...
Hubcaps: simplec10.myshopify.com/produ...
Duplicolor White: amzn.to/3UrUIyg
2K Clear Coat: amzn.to/3Pf8OSK
Tack Cloth: amzn.to/3N0v1Bl
Tape with Plastic: amzn.to/43jy0fs
Painters Tape: amzn.to/3KFmOCJ
Green Scuff Pads: amzn.to/3KoCbyb
Goo Gone Adhesive Remover: amzn.to/3nRnY5b
Goo Gone Degreaser: amzn.to/42CetFw
1-inch Spacers: amzn.to/3GvaNNO
Oreillys Custom Paint Info: www.oreillyauto.com/store-ser...
Other Transport Wheel Videos:
Simple.Clips Video: • C10 | SIMPLE.CLIPS | I...
Simple.Bore Video: • C10 | SIMPLE.BORE | DI...
Transport Wheel Video: • Custom Transport Wheel...
→ Become a Simple.C10 Subscriber!
→ Website: www.simplec10.co
→ Instagram: / simple.c10
→ Facebook: / simplec10
→ My Channel Home Page: @simple.c10
→ As an Amazon Associate, I earn from qualifying purchases.
If the video was helpful, remember to give it a "thumbs up" and consider subscribing. - ยานยนต์และพาหนะ
Love that color combo
Thank you
Awesome content
Love all the hard work
Thank you
Looks awesome
Thank you
Wow! Those turned out awesome!
Thank you. They are my best set to date and have held up really well. The 2k clear is great spray paint.
Boa noite congrats carros vai amén bom trabalho
Thanks
Thank you for your detailed videos, it’s really helping me on my build. Question, the measurements for the tires your running on this build?
255/30/22
Love the way the tires turned out I am no expert but I think when you cut the tape after you laid down the primary color had you left the plastic and only pulled the tape from the inside you could have saved yourself at least 4 decks of cards and a lot of time. Love the shots and explanation great video
Thanks for the suggestion. I’ve tried taping it multiple ways and this go around with the cards it saved me at least an hour of taping. I’m all for trying new techniques though!
Looks great! Where do you get the hub caps?
Detroit steel had these
How many spray cans did you use to paint the white wall and the center in total?
Awesome video! Greetings from the netherlands 🇳🇱
I would recommend 1 White, 3 Color, and 3 Clear. It all matters how heavy you coat them. I feel as though I used the bare minimum on this truck. If I would have had one more can of clear I could have put a final heavy coat on.
Would you recommend a spacer for the rear? just got a set in for my 1963 c10 fits my front disk looking for the rear
If it’s a stepside get a 1 inch spacer. If it’s fleet, use my bore kit.
What tire size are you running? Looks great
255/30/22
Hell ya
Thanks
Do we have to spread the clips widely to hold the caps on , no rattle etc
No adjustment is needed. The template has them with a tight fit.
since you threw out the names of some aftermarket wheel manufacturers, what is the benefit to going with GM transport wheels? Are they cheaper?
Prices vary but yes they are cheaper in most areas.
whats the cream color you are usuing
I color matched my interior.
What color white do you use?
I usually use the the bright white in duplicolor perfect match. Any white will do. I’ve used the GM white and Toyota before. It all looks about the same.
What do you do for the backside?
Leave it alone.
I would as well , but they are new and the backside already showing surface rust in the cracks. Maybe just a wipe down and a clear coat?
What size are the hubcaps?
10.25 dog dish
What size are the tires?
255/30/22
What's their weight?
About 55lb each
I want transport wheels I can’t get them
I have a 66 c10 new engine gas tank everything thing. Transport wheels I can’t find any help I would appreciate 😊
I have them available on my website now and can ship. simplec10.myshopify.com/products/transport-wheels-22x9
Why tap them? Just use ss screws with nuts and lock washers.
I like to be able to replace them without taking my wheel off to get to the backside. Either way would work though.
Got it, beautiful wheels, don't see them in my area.