ฝัง
- เผยแพร่เมื่อ 29 พ.ค. 2021
- In today's video, I'll be showing you how how to replace your headlight ballasts to get your BMW's headlights working again!
PRODUCTS USED:
BMW HID Headlight Ballast: amzn.to/34uhtsf
T-20 Screwdriver: amzn.to/3c0i8FV
Save time and money by SUBSCRIBING for more helpful videos! 🔔
INSTAGRAM: / izzysakran
BAVMODS WEBSITE: www.bavmods.com
MY FAVORITE UPGRADES:
BMW Digital Gauge Cluster: go.www.bavmods.com/ancCXJ
Carbon Fiber Flat-Bottom Steering Wheel: go.www.bavmods.com/JZbTTB
BMW E92 Smoked LCI Taillights: go.www.bavmods.com/tpaY7a
BMW E92 Seatbelt Extender Arm Fix Hooks: go.www.bavmods.com/DfZ0Zo
BMW Carbon Fiber Paddle Shifters: go.www.bavmods.com/KhI3xM
My Exterior Modifications:
E92 M-Sport Style Bumper w/ Fog Lamps Included: amzn.to/3ySPnXg
E92 M3 Style Front Bumper w/ Braking Ram Air Ducts: UNAVAILABLE
E90 M3 Replica Front Bumper w/ Braking Ram Air Ducts: amzn.to/3vUJXrg
BMW E92 Smoked LCI Taillights: go.www.bavmods.com/tpaY7a
Gloss Black Double Slat Kidney Grilles: amzn.to/3re9ok7
CSL Style Trunk Spoiler: amzn.to/3ci0b6p
M3 Style Carbon Fiber Mirror Caps: go.www.bavmods.com/lzFMZI
Aluminum Triangle Tow Hook: go.www.bavmods.com/km7bOu
Black Sequential Turn Signal Side Markers: go.www.bavmods.com/JwnoKO
White LED Front Turn Signal/DRL Bulbs: go.www.bavmods.com/X5Gbfk
BMW E9X Aluminum Roof Racks: amzn.to/3tUNh7z
BMW Black Emblem Set: go.www.bavmods.com/2voyo9
BMW 170-Degree Reverse Camera: go.www.bavmods.com/ISRlEX
Carbon Fiber Fuel Cap: go.www.bavmods.com/1EhSTE
BMW Carbon Fiber Shark Fin Antenna: go.www.bavmods.com/vCbw78
My Interior Modifications:
BMW E9X Digital Gauge Cluster: go.www.bavmods.com/ancCXJ
Carbon Fiber Flat-Bottom Steering Wheel: go.www.bavmods.com/HQrhIr
Carbon Fiber Parking Brake Handle: go.www.bavmods.com/eSFhlS
BMW M-Performance Alacantara Shiftknob: go.www.bavmods.com/Dx0sGw
Carbon Fiber F30 Style Shiftknob: go.www.bavmods.com/EbOJvI
BMW E9X Carbon Fiber Armrest Lid: go.www.bavmods.com/YdPGwZ
BMW E90/E92 Manual Style Shiftboot: go.www.bavmods.com/Mvq8r2
Carbon Fiber Interior Door Handle: go.www.bavmods.com/Fgsjhb
5D High Gloss Carbon Fiber Wrap: amzn.to/31cC7eJ
White LED Interior Lighting Kit: go.www.bavmods.com/ENgtuO
License Plate Suction Cups: amzn.to/3facO55
Red Gloss Push Start button: go.www.bavmods.com/mM3zGt
German Flag Carbon Fiber Seatbelt Pad Covers: amzn.to/2NJzlKR
BMW E90/E92 F30 Style M-Sport Pedals: go.www.bavmods.com/gMNl6L
Black BMW Steering Wheel Emblem Kit: amzn.to/3HsooWJ
E90 E92 Gloss Black Push Start Button Ring: go.www.bavmods.com/d8wFiQ
E90 E92 Leather Keyfob Case: go.www.bavmods.com/I4d9YJ
Aluminum Seatbelt Buckle Chime Clip: go.www.bavmods.com/fdGHUK
BMW E9X Carbon Fiber Dashboard Panel Inserts: go.www.bavmods.com/68LkXn
Custom BMW Air Freshener: go.www.bavmods.com/8SJ7t0
Upgraded iDrive Knob: go.www.bavmods.com/yNBQ6P
My Performance Upgrades:
Solowerks S1 Coilover System (RWD): amzn.to/3s8o9rw
Megan Race-Spec Strut Bar: amzn.to/2PlnlQd
Upgraded Air Intake Inlet Silicone Hose: go.www.bavmods.com/WUyv8y
Aluminum Cylinder Head Coolant Hose Fitting: go.www.bavmods.com/alfiGm
Injen Technologies X-Pedal PRO Black Edition Throttle Controller: amzn.to/3yFSssf
BMW 328i PowerSport Drilled/Slotted Rotors and Ceramic Pads: amzn.to/3foVVCK
BMW 335i Drilled Slotted Rotors: amzn.to/3Hq0tHC
BMW E9X Air Intake Ram Air Scoops: go.www.bavmods.com/MiRkpM
StopTech Stainless Steel Brake Lines: www.fcpeuro.com
M/Sport Full Aluminum Oil Filter Cap: go.www.bavmods.com/vhBOWF
Upgraded Aluminum Oil Filler Cap: go.www.bavmods.com/Mvc1oh
Upgraded Aluminum Expansion Tank Cap: go.www.bavmods.com/MjOQKv
CSF Aluminum Radiator: amzn.to/45CIRCo
Performance Cabin Air Filters: go.www.bavmods.com/VVTXm1
My Wheel Setup:
Niche Misano 18 inch 5x120MM Rims: amzn.to/3lJALkR
5x120MM Hubcentric 15MM Wheel Spacers: amzn.to/399oXmZ
5x120MM Hubcentric 20MM Wheel Spacers: amzn.to/3f3Rv5j
Black Aluminum Barrel Tire Steam Caps: amzn.to/3rmVmwV
My Lighting Upgrades:
DMEX D1S 6000K Cold White Xenon Bulbs: amzn.to/3cc08Zy
BMW 40W H8 360-Degree White LED Angel Eye/Halo Bulb Set: amzn.to/3Qurj4b
White LED Interior Lighting Kit: go.www.bavmods.com/ENgtuO
White LED License Plate Lights: amzn.to/3se8lSN
Black Sequential Turn Signal Side Markers: go.www.bavmods.com/JwnoKO
BMW E92 Seatbelt Extender Arm Fix Hooks:
go.www.bavmods.com/DfZ0Zo
My Diagnostics Scanner Tool:
Foxwell NT510 BMW Full Diagnostic Tool: amzn.to/3c6b0Fc - ยานยนต์และพาหนะ
Perfect review. Wish me luck!
Wanted say thank you bro
Awesome. Great video.
Awesome... I was thinking the same but youve confirmed it...Other peops have you taking the headlight unit out ie bumper removal etc and I was like wtf... hopefully i can do it your method cheers dude
Well he doesn’t have the big oil cooler in the way like most n54s. If you have the oil cooler your not getting to the ballast without taking the bumper off
Thank you.
Awesome! Easier than I thought! Hope that's what's the problem with my car. 😎👍
Can you verify the cable orientation for the driver side? My driver side is the one im replacing, however, the actual housing for the ballast will not fit the wires in this formation.
Tip for the future bro, blur your name and address from the packages
I appreciate you looking out for me 💯
Nice video have to get that wheel cover replaced though. That’s whats causing the outage the water is flying up in the ballice .
IzzyE9X: Great video. Is the ballast really that easy to get to on the driver’s side too? Because I’ve been told the bumper needs to be removed. I have a 2009 E92 M3 that needs a driver’s side ballast.
Will this work on my 2012 x3 please, great news if it does😅
Is this the only ballast? 2011 328i coupe
Niceeee I’m ordering my balist now. Headlight for sure still not working.
Nice video bro!!
Question:
Does a Ballast effect the brightness of the bulb... so if there on there way out and getting old with they be less brighter and will new ballast be nice and bright? My E92 is 2008 which us fairly old and I just dont find the lights very bright nor reach very far ... so im thinking of replacing with new bulbs n ballasts
Cheers
I’m fairly certain the new ballasts due affect light output! I did a trial and used two new bulbs and only one new ballast and noticed one light was more yellow than the one with the new ballast as well
I’ve used this same ballast , changed mine about sep 2021 && April 2022 my headlight is out again. I have a back up ballast so we’re going to see if these Amazon parts are worth it.
Hmm, maybe an underlying issue or just bad luck? I’ve had mine in the car for about 2 years now and it’s still working perfectly fine
Will this work bmw 325i 2006
I think I’ve did it wrong 😅
I’ve connected wrong the connection
I have to mention that my wiring was a mess
All the cables were cooked so I’ve isolated them
Now I’m going to test
If it works
Well great
Otherwise new balast module
Thx for the video❤
Any problems so far? if you watch Raymond Urias's video on his ballast replacement he mentions how the aftermarket ones melted and failed due to rubber connectors instead of plastic ones. Upon reading the reviews on this AA ignition ballast, it doesn't seem like there is any melting issues. I also don't understand why the amazon description of them say they're not compatible with my 2011 e92 m3 if it says it replaces the same part number that my m3 uses.
Should still be the same exact ballast for the M3
Hi Izzy, I watched your video. can this ballast work on my 2009 BMW 328i Xdrive? I have my headlights and my passenger side indicator which does not work. thank you
Yes! It does!
Thanks
of course!
I have to same light configuration as you can you point out where the angel eye bulb are… my drivers side went out and I can’t find where to replace it, I am told it’s a h8 bulb
That is correct it is not an H8 bulb. If you go to 1:32 in the video, you’ll see where a circular little area with some metal inside, that is supposed to be where the angel eye bulb cover goes. The bulb simply twists out
There should be gasket goes into the bottom of the assembly. I am not sure which way should I place that gasket.
hey man can u link all the tools u used in this video ?
BMW HID Headlight Ballast: amzn.to/34uhtsf
T-20 Screwdriver: amzn.to/3c0i8FV
10MM Socket: amzn.to/3hm94hv
Hey bro my angel eyes and xenon wont work, only the side marker, could it be the ballast? I have a 07 335i
Did you figure out if it was the ballast bro?
Did it make a weird high pitch noise when u tried to turn on the lights
I didn’t notice any noise but that could be from the bulbs/ballasts shorting or from the automatic headlights angling themselves
What if all 4 Angel eyes are Flickering constantly , can it be the Ballasts that are faulty or About to give out?
That would be the halo bulbs or the fuse, the ballast controls the headlight high and low beams. The halo bulbs are separate
@@IzzyE9X So I coded the DRL and Cold and warm test off and no more flickering during the day. So when I power on headlights by pressing Fog lights botton turns on everything well. Headlights low and highs, fogs work great but angel eyes flicker constantly. I have a bmw 2011 328i coupe and i wonder where the angel bulbs are? I opened the housing from above and there is bulb in the middle and the angel eyes clear tube goes toward the bottom of the headlight housing.
Are you working on a E92? Why are people in other videos of e90,92s removing the front bumper to do this job? I have a 2009 e92 328i and I would love to replace the ballast without removing the front bumper. Thanks.
It is an E92, I see no situation where you’d need to remove the bumper! to remove the whole headlight assembly you will need to, but definitely not the ballast
Thanks for the reply. After reading some comments I think the other videos that show bumper removal to change the ballast the cars being worked on are 335s and there was mention of an oil cooler being in the way of doing the job from the wheel well.
I have a E93 not working fog lights and headlight left, help me please bro Replace the bulbs
I have a video on my channel on how to replace the bulbs
Do you need to turn off to battery for this?
I would to be safe so you don't short anything out
I have a w 328i 2007 coupe brand new ballast and bulb but my light doesn’t turn on. Only my halos are on
check your fuses
I have 330d 2006 but has lci headlights can this be done on car thanks also the wire what plugs into the Ds1 bulb it smells burnt can anyone help I have new ballast also my indercater still works the high beam does also halo just not bulb tnx
If the ballast is new and the turn signal, the halo and the high beams all work but the headlight bulb doesn’t it’s most likely the headlight bulb or fuse.
@IzzyE9X no the ballast in the car is the old one and they all work apart from main beam I have a new ballast to go into car when I take the wire-plug off the back of the ds1 headlight bulb it smells burnt 😳
Also looks abit melted aswell but still goes onto plug so all I can think its the ballast???
you think that is good for 2012. 328
How come your old ballast 2:10 only have 4 pins and the new one 3:15 have the black plastic on it man? Do they still fit in the harness even the black plastic is on it
The old ballast wore out so much that the black plastic piece came off when I unplugged it. It’s supposed to have the black piece
Can you make a video on how to rewire the headlights my wires are just the pure wire it doesn’t have the coat on it
for a short term fix, you can use some electrical tape.
@@IzzyE9X how if my hand barely fits in there 😭 is there a way to remove the headlight and take the inside of it out
I was very interested in fixing this issue on my car but when I seen the ryobi drill I quickly left
what year is your e92
2007
6/up Salut!!!
Is the brand you bought good quality?
They get good reviews across Amazon and online. They’re the same price as the OEM ones but lifetime warranty and Amazon Prime is a plus. I’d probably do OEM since it’s the same price, but Prime means next day arrival
08 BMW 335xi not the ballest, It's the Adaptive light control modual the Ballest is close to the radiator!!!
So you skipped the damn part I need most how do I unplug that “fried” plug you were so worried about
This is if you don’t have an oil cooler on your n54. I have one so it’s right in the way of the ballast. So this video isn’t accurate for all e92 n54s.
Thanks man! By the way weird Fkn fingers and whats up with your thumb? Hope you are not a proctologist! All good, thanks!