Same here. We were replacing a lid switch and couldn't get the cabinet back on. In other videos we watched with this machine, they just said line the tabs to the holes to get it back on but didn't mention the lip on the front of the frame needed to go up inside the cabinet at the front. Thank you for demonstrating this so clearly. Boy were we so glad to find you. All is fixed and I don't have to worry about not having the money to buy my son's Halloween costume.
My math teacher always said 'I'm going to teach you the tricks because that's how you'll learn'. You are AWESOME. I've been struggling with this for two weeks, it came off easy but...! There's no instructional out there like yours. Subbed :)
Poor, single female here. I appreciate this video. From the bottom of my heart I thank you. I replaced the lid switch myself, because I couldn't afford to pay a repair man $150. (the part was $30ish) I couldn't get the cabinet so sit properly. I've cut my fingers on the metal (thank God for Tetanus shots)and I've dropped the lid on my fingers twice. I've screamed from pain 6 times. I lost count of how many times I've screamed from frustration. I've sworn so much that I've created new 4 letter words.
I totally feel your pain and frustration! I was having an issue getting clear enough instructions from the other repair videos..... This man is awesome!
The absolute best tutorial on these God forsaken cabinet replacement, I was going nuts getting this bastard back on, after watching this a sense of calmness washed pun intended over me and in what was taking over an hour I got it done in less than 10? Thank you sir!
Thank you for all you knowledge that you share so freely. May you be blessed beyond measure ! Appreciate your other video on getting the sock out of the pump . It wasn’t the case for us but it narrows down the problems that it could’ve been. From Milton, Fl. Family
Your attention to detail and in depth description is exactly what I needed. I was having so much trouble getting mine back on. I really appreciate you man, this was a great service.
Thank you Reggie!! I struggled for 45 mins trying to get the cover back on my Kenmore 80 Series washer after a repair. I appreciate the fact that you didn't get it on right the first time (like everybody else watching this video) and how to correct when that happens. Also, great lighting...I could see everything you were doing perfectly. And thank you for pointing out the pressure hose... I would have never thought to make sure that was not being pinched. Watched your video and 2 tries later, it was on! Thank you again!
Omg thank you, thank you, thank you for this video!!! I was trying to get my whirlpool shell back on and talk about a lot of cussing! This video saved me!! Thanks so much for the detailed video. Every one of the notches were flat and needed to be reset upright. It still was a pain, but at least I was able to finally get that shell on, cause I had about given up. Have a great day!!!
Why oh why did I not see this BEFORE I screwed around with mine for almost an hour till I got it right. So F'in difficult to get that thing to sit right. Man, the cuss words were flyin'. Thank you for this video. If only all of us could meet at a bar and each tell our stories. That would be a knee-slapper !
Dude I been messin with this stupid dryer for 45 mins... and that was after I found the problem (baby sock in the pump) I started puttin everything back together... job went smooth made lil mess but not too bad... everything was as close to perfect as a man could ask for... now let's talk a min, I'm an auto technician and don't know anything but cars... I can take the most complex engine and do anything you need done.. but this freakin washer has drove me crazy cause I could not figure out how to put the outter shell back on... so seriously thank you very much and I know I may sound stupid and when it come to certain things I guess I am lol... but man thank you for this video cause I would have been out here for lord knows how long because it was gonna be done and workin tonight... period!!! Well I didn't know the front panel went under that piece so I kept swappin the hole thing either to the top or bottom and it felt like it was goona fall apart... all flimsy and definitely not right 🤣🤣🤣🤣 it is perfect now and I'm goin to bed.... P.s. with clothes washing HAAA!!!! Y'all have a good night and again brother THANK YOU VERY MUCH!!!!
Thank you so much for your informative video. My wife and I struggled for hours before we watched your video. We didn’t realize that our tabs were bent down. You saved us. 👍🏻🤓👍🏻
Like others have expressed thier appreciation I can't thank you enough for explaining this. I was at the point you described sweating and cussing and then you saved me big time! I spent an hour trying to get that cover on and it less then a minute to do after watching your video. Thanks again!
Reggie, thank you so much. Your videos helped me save lot's of time and tool throwing...... I appreciate you're willingness to share your knowledge with others. The world needs more people like you.
Thank you so much Reggie! You literally saved my a$$ from buying parts that I didn't need! I'm a lifetime subscriber. I really appreciate you brother! Thank you again sir!
Thank you very much for your video. Your description of how the bottom of the washer cabinet goes with the bottom metal frame helped me a lot! Also thank you for pointing out that the tabs on the bottom of the metal frame need to be up. Thumbs up!
Thank you so much! Following your video, my husband and I were able to reattach our outer shell and stop our machine from making a terrible knocking noise. You explained it perfectly. Thank you again!
Thank you. Just pulled my sons sock out of the pump from watching your other video and you mentioned that you had this video on putting the shell back on. Saved me $160. God bless.
Just seeing this video. Thank you for your patience and the personal time you took to show DIY 'er the proper way to reinstall the outside shell of a washing machine correctly.
Reggie you are a good Friend to share these Videos to help us who want to flip and fix Appliances !!!! You should have a place where Flippers who need used parts to fix their machines can find used parts like a list where everyone can place what they have and prices ....Thanks again !!! Joe From Massachusetts
trying to be helpful to my husband I went ahead and took my Kenmore apart!! Dreading the time to put it back together we went to the laundry mat to avoid the hassle! Now I don’t have a choice, It has to go back together!! I appreciate your knowledge in the video as I watched it before fighting with my appliance !!
Thank you so much!! Just watched 2 of your videos and was able to save my washing machine from a rogue sock! Very good, easy to follow instructions. Thank you.
I’m about to replace my lid switch for the 5th time. I NEVER can reliably get the cabinet back on. Thanks to your detailed instructions, I’m feeling good about it this time. Thank you!
Thank you so much for a detailed explanation on how to get the cabinet back on. I had to replace the water inlet valve and couldn't figure out how to get it lined up right.
Reggie you are the man! Between this video and your other one on fixing a washer that won't spin or drain you saved us during the Corona lockdown. Subscribed.
Thank you sir! I thought I was going to need a strap to keep the cabinet from shifting out of alignment while trying to put my Kenmore washer back together. Appreciate your thorough & helpful instructions.
Ok so one smashed finger and some choice words later, your video saved the day. Thank you so much, I thought it was going to win. I even had a husband and two 80 year old inlaws "helping". LOL
Thank you I've been trying to find you for a couple of days and I thank you very much for showing me how to put them stupid clips on you're the best I have subscribed again thank you very much sir and now I can wash my clothes out there I put the water pump back on
Love the tips and knowledge you share with all of us. Have to say you have taught me so much. I'll keep watching. Out of curiosity if you make a house call and the washer shutoff valves are old and crusty do you turn the water main off? I have worked in a few homes that the shutoffs looks old and crusty and don't want to take a chance so I turn off the whole house. Making a call later to an old house with stuck valves!
Appreciate the love thank you for watching my channel. If the main water valve is accessible then yes that would be a good safety precaution typically if the valves are questionable and bad I don't hook up and I recommend they called the apartment maintenance team or I refer them to a handyman I know. Only time I've done this is when I see someone cut a water hose or left one hose on the valve. that's usually a red flag
thank you! i was feeling like a dumbass, fixing my washer only to have no clue how to put the pieces back together. i felt like a kid tryna fit a block in a round hole...derrrrrrr. thank you!
Thank you very much . i would love to get info from you on my brand new speed queen washer throwing an error code. I have not been able to find any info at all.
Thank you thank you ! I managed to take the washer apart, fix it, clean it, but when it came to putting it back together ... UGH. Without your video I would still be at it!!
Thank you for spending your time helping others. Now my question is can you send me that model # to that washer cuz i bought one just like it in 2020 not knowing it hade no model # tag. Now i need a few parts but cant order cuz you know... 👍
I have a Whirlpool Ultimate Care II. It spins super slow. I took everything off and nothing is broken. I'm scared it's the motor bc it spins like a snail. Literally. I can't find anything on resetting it just I'm case it's a fuse or something. How do I do that? The machine is pretty new. 3 years. Old, bought from Lowe's.
Quick question? I am taking online courses for repairing washer and dryers. When you started did you start with COD or warranty companies? If you started with warranty companies, what information did you have to have to get the warranty business?
Thanks so much for this! I definitely let fly a few (or more than a few!) cuss words this evening, and we've given up for the night, after trying to get our wrap back on for more than an hour. We'll try again tomorrow. We did have some bent tabs which I straightened, and I did finally figure that the front lip needs to go under the frame, and we tried that method a few times, but then in the back it seems like we are not back far enough to drop onto the back tabs. And when we try to push back more, the front rides up and out from under the frame. Maybe that means we are never quite getting fully under it.. I'll try to tip it more like you showed here and see if we can get it tomorrow. I'll send an update
A follow up to this, I got it! The thing I wasn't doing when putting it on was having the lid open so I could see what was going on at that front edge. Having the lid open I could see it was getting hung up a bit when I got to the frame. Giving it a little kick got the front lip of wrap underneath the frame, and then it dropped on fine, just had to push in the back sides and push down some to get the back of the sides down in place. Thanks a ton for your video!
Same here. We were replacing a lid switch and couldn't get the cabinet back on. In other videos we watched with this machine, they just said line the tabs to the holes to get it back on but didn't mention the lip on the front of the frame needed to go up inside the cabinet at the front. Thank you for demonstrating this so clearly. Boy were we so glad to find you. All is fixed and I don't have to worry about not having the money to buy my son's Halloween costume.
You are seriously my hero! I've been going to the laundromat for EIGHT months cuz my washer was taken apart. THANK YOU❤❤
My math teacher always said 'I'm going to teach you the tricks because that's how you'll learn'. You are AWESOME. I've been struggling with this for two weeks, it came off easy but...! There's no instructional out there like yours. Subbed :)
Poor, single female here. I appreciate this video. From the bottom of my heart I thank you. I replaced the lid switch myself, because I couldn't afford to pay a repair man $150. (the part was $30ish) I couldn't get the cabinet so sit properly. I've cut my fingers on the metal (thank God for Tetanus shots)and I've dropped the lid on my fingers twice. I've screamed from pain 6 times. I lost count of how many times I've screamed from frustration. I've sworn so much that I've created new 4 letter words.
This is not easy my son and I are having a hard time putting the shell back on we should of bought a new washer it's a pita s pain in the ass
I totally feel your pain and frustration! I was having an issue getting clear enough instructions from the other repair videos..... This man is awesome!
Thanks Reggie. I went from frustration to easy peasy. Subscribed.
Awesome. Happy to Help
The absolute best tutorial on these God forsaken cabinet replacement, I was going nuts getting this bastard back on, after watching this a sense of calmness washed pun intended over me and in what was taking over an hour I got it done in less than 10? Thank you sir!
This young man did an extremely detailed and good job. Because this can be nerve-racking job well done.
Thank you for all you knowledge that you share so freely. May you be blessed beyond measure ! Appreciate your other video on getting the sock out of the pump . It wasn’t the case for us but it narrows down the problems that it could’ve been. From Milton, Fl. Family
Your attention to detail and in depth description is exactly what I needed. I was having so much trouble getting mine back on. I really appreciate you man, this was a great service.
Glad to help! Thank you for the feedback
Thank you Reggie!! I struggled for 45 mins trying to get the cover back on my Kenmore 80 Series washer after a repair. I appreciate the fact that you didn't get it on right the first time (like everybody else watching this video) and how to correct when that happens. Also, great lighting...I could see everything you were doing perfectly. And thank you for pointing out the pressure hose... I would have never thought to make sure that was not being pinched. Watched your video and 2 tries later, it was on! Thank you again!
Omg thank you, thank you, thank you for this video!!! I was trying to get my whirlpool shell back on and talk about a lot of cussing! This video saved me!! Thanks so much for the detailed video. Every one of the notches were flat and needed to be reset upright. It still was a pain, but at least I was able to finally get that shell on, cause I had about given up. Have a great day!!!
Why oh why did I not see this BEFORE I screwed around with mine for almost an hour till I got it right. So F'in difficult to get that thing to sit right. Man, the cuss words were flyin'. Thank you for this video. If only all of us could meet at a bar and each tell our stories. That would be a knee-slapper !
This was a mighty fine and detailed tutorial and I thank you for showing us how it's done correctly.
Dude I been messin with this stupid dryer for 45 mins... and that was after I found the problem (baby sock in the pump) I started puttin everything back together... job went smooth made lil mess but not too bad... everything was as close to perfect as a man could ask for... now let's talk a min, I'm an auto technician and don't know anything but cars... I can take the most complex engine and do anything you need done.. but this freakin washer has drove me crazy cause I could not figure out how to put the outter shell back on... so seriously thank you very much and I know I may sound stupid and when it come to certain things I guess I am lol... but man thank you for this video cause I would have been out here for lord knows how long because it was gonna be done and workin tonight... period!!! Well I didn't know the front panel went under that piece so I kept swappin the hole thing either to the top or bottom and it felt like it was goona fall apart... all flimsy and definitely not right 🤣🤣🤣🤣 it is perfect now and I'm goin to bed....
P.s. with clothes washing HAAA!!!! Y'all have a good night and again brother THANK YOU VERY MUCH!!!!
Thank you so much for your informative video. My wife and I struggled for hours before we watched your video. We didn’t realize that our tabs were bent down. You saved us. 👍🏻🤓👍🏻
Your welcome, glad i could help. Thank you for watching.
Like others have expressed thier appreciation I can't thank you enough for explaining this. I was at the point you described sweating and cussing and then you saved me big time! I spent an hour trying to get that cover on and it less then a minute to do after watching your video. Thanks again!
Reggie, thank you so much. Your videos helped me save lot's of time and tool throwing...... I appreciate you're willingness to share your knowledge with others. The world needs more people like you.
🙏🏾☺ Thank you
Thank you so much Reggie! You literally saved my a$$ from buying parts that I didn't need! I'm a lifetime subscriber. I really appreciate you brother! Thank you again sir!
Thank you very much for your video. Your description of how the bottom of the washer cabinet goes with the bottom metal frame helped me a lot! Also thank you for pointing out that the tabs on the bottom of the metal frame need to be up. Thumbs up!
Thank you so much! Following your video, my husband and I were able to reattach our outer shell and stop our machine from making a terrible knocking noise. You explained it perfectly. Thank you again!
Thank you. Just pulled my sons sock out of the pump from watching your other video and you mentioned that you had this video on putting the shell back on. Saved me $160. God bless.
Just seeing this video. Thank you for your patience and the personal time you took to show DIY 'er the proper way to reinstall the outside shell of a washing machine correctly.
Reggie you are a good Friend to share these Videos to help us who want to flip and fix Appliances !!!! You should have a place where Flippers who need used parts to fix their machines can find used parts like a list where everyone can place what they have and prices ....Thanks again !!! Joe From Massachusetts
Excellent. Just what I needed after spending more than an hour trying to get the damned thing back on. Many thanks.
Thanks!
Thanks for being a lifesaver. I didn’t know what I was doing wrong. You are awesome!!
trying to be helpful to my husband I went ahead and took my Kenmore apart!! Dreading the time to put it back together we went to the laundry mat to avoid the hassle! Now I don’t have a choice, It has to go back together!! I appreciate your knowledge in the video as I watched it before fighting with my appliance !!
You got this!
Fantastic video! You just made my day and saved me a repair bill! Thank You!
Thanks, very straightforward and easy to follow.
Thank you so much!! Just watched 2 of your videos and was able to save my washing machine from a rogue sock! Very good, easy to follow instructions. Thank you.
Awesome - thanks so much for taking the time to video this.
Excellent video! I didn’t record how I disassembled my washer, and you saved me lots of trouble! Thanks from Washington State!
Thanks. Was having a bit of a bear trying to get the shell back on. This clarified things!
Awesome
I’m about to replace my lid switch for the 5th time. I NEVER can reliably get the cabinet back on. Thanks to your detailed instructions, I’m feeling good about it this time.
Thank you!
Thank you so much for a detailed explanation on how to get the cabinet back on. I had to replace the water inlet valve and couldn't figure out how to get it lined up right.
Reggie, my new friend!!!! THANK YOU!!! Totally saved us. I really appreciate your video!! My husband and I were able to fix our washer.
Reggie you are the man! Between this video and your other one on fixing a washer that won't spin or drain you saved us during the Corona lockdown. Subscribed.
Awesome!!!
Answered my question and gave me a pointer or two I wouldn't have thought of. Thank you!
Thank you sir!
I thought I was going to need a strap to keep the cabinet from shifting out of alignment while trying to put my Kenmore washer back together.
Appreciate your thorough & helpful instructions.
Ok so one smashed finger and some choice words later, your video saved the day. Thank you so much, I thought it was going to win. I even had a husband and two 80 year old inlaws "helping". LOL
a great professional instructional video. Thanks
Thank you for the thorough and thoughtful explanation. I've been fighting with one for a bit now and this should help heaps!
Thank you I've been trying to find you for a couple of days and I thank you very much for showing me how to put them stupid clips on you're the best I have subscribed again thank you very much sir and now I can wash my clothes out there I put the water pump back on
Thank you. My washer was about to sail out the laundry room door I have cussed it for an hour already
Thank you for this how too video. Just what I needed. Well done.
Thank you for all of your help!!!
Thank you for doing that outside in bright light and explained it so well 😊
Thanks so much for the instructions! Worked great on my whirlpool washer
Love the tips and knowledge you share with all of us. Have to say you have taught me so much. I'll keep watching. Out of curiosity if you make a house call and the washer shutoff valves are old and crusty do you turn the water main off? I have worked in a few homes that the shutoffs looks old and crusty and don't want to take a chance so I turn off the whole house. Making a call later to an old house with stuck valves!
Appreciate the love thank you for watching my channel. If the main water valve is accessible then yes that would be a good safety precaution typically if the valves are questionable and bad I don't hook up and I recommend they called the apartment maintenance team or I refer them to a handyman I know. Only time I've done this is when I see someone cut a water hose or left one hose on the valve. that's usually a red flag
thank you! i was feeling like a dumbass, fixing my washer only to have no clue how to put the pieces back together. i felt like a kid tryna fit a block in a round hole...derrrrrrr. thank you!
Excellent video! I appreciate the detail.
Love you're work great detailing, everything is perfect, this is what I want to get into thanks for everything
Perfect! Thank you so much for going into such detail. Best video on how this is done.
Thank you for your expertise. So helpful.
Very helpful! I took my washer apart to fix the capacitor, and was having trouble getting the cabinet back on. Thanks for the guidance! ^_^
Thanks for posting, solved my fitment issue. thumbs up!
Thanks for the extremely helpful tutorial sir. Keep up the good work!
Thx Andy
previous tenant had lad left the cover barely attached, thank you so much. Now i just have to wrestle with it in a tight space
Thank you so much for this video. It has cleared a lot of issues I was facing.
Right on bro... Thank you
Amazing. Just the video I needed. Thank you
Much love brotha.!!! Thank you for sharing!!! Liked and subscribed. Your vid on this and the sock in pump is awesome!!
Thank you for both videos! Helped out a lot!!!
Your a bloody legend mate
Thank you very much . i would love to get info from you on my brand new speed queen washer throwing an error code. I have not been able to find any info at all.
Thank you thank you ! I managed to take the washer apart, fix it, clean it, but when it came to putting it back together ... UGH. Without your video I would still be at it!!
Thank you for this! Helped a lot.
Thank you for spending your time helping others. Now my question is can you send me that model # to that washer cuz i bought one just like it in 2020 not knowing it hade no model # tag. Now i need a few parts but cant order cuz you know... 👍
My Kenmore 400 has another set of clips that are smaller. How do those go back in place?
Lol , that's exactly what I needed. Thank you 👍
Great video thanks for the help!!
Great video. Helped me out. I appreciate it!
Thank you for the video! ❤
Thank you!
great job
thanks man you are a seasoned pro in the washer dryer buis thanks so much !
Good stuff. My water pressure switch I think is not working.
I have a Whirlpool Ultimate Care II. It spins super slow. I took everything off and nothing is broken. I'm scared it's the motor bc it spins like a snail. Literally. I can't find anything on resetting it just I'm case it's a fuse or something. How do I do that? The machine is pretty new. 3 years. Old, bought from Lowe's.
great video, some videos skip the re install.
Quick question? I am taking online courses for repairing washer and dryers. When you started did you start with COD or warranty companies? If you started with warranty companies, what information did you have to have to get the warranty business?
I started with picking up unwanted washers and dryers practicing on them and reselling them.
Thank you for your help sir!
Awesome!!! Thank you so much!
I wish you had also showed how to get the back panel on
Thank you
Thanks so much for this! I definitely let fly a few (or more than a few!) cuss words this evening, and we've given up for the night, after trying to get our wrap back on for more than an hour. We'll try again tomorrow. We did have some bent tabs which I straightened, and I did finally figure that the front lip needs to go under the frame, and we tried that method a few times, but then in the back it seems like we are not back far enough to drop onto the back tabs. And when we try to push back more, the front rides up and out from under the frame. Maybe that means we are never quite getting fully under it.. I'll try to tip it more like you showed here and see if we can get it tomorrow. I'll send an update
A follow up to this, I got it! The thing I wasn't doing when putting it on was having the lid open so I could see what was going on at that front edge. Having the lid open I could see it was getting hung up a bit when I got to the frame. Giving it a little kick got the front lip of wrap underneath the frame, and then it dropped on fine, just had to push in the back sides and push down some to get the back of the sides down in place. Thanks a ton for your video!
This is the exact washer I’m trying to fix the belt and can’t find it. Someone please tell or help me. I have the cover off already
your video was very helpful to me, Thank you
Thank you thank you thank you.....you saved the day.
Best Regards,
Dan Rom
again!! thanks for the help!!!
Thanks! This helped a lot!
Thank you for the video Sir!!!!!! Life savor😊
Lifesaver! Thank you!
Thank you so much I was so lost
Thanks. Great Vid!
Thank you for watching DeWayne.
Thank you Sir!
Very helpful thanks
Neighbors tossed out washer , I need one for the kids and cabinet separated . I knew their had to be a procure. Retired HVac
You saved me!
How much will you charge me to show me how to fix my washer virtually?
Depending on how much training you need. Text me 678-615-8317 Reggie
Dude.... I'm struggling. Help.