ฝัง
- เผยแพร่เมื่อ 2 ต.ค. 2024
- Aisin AMR500 Supercharger Disassembly
► Tilaa kanavani/Subscribe to my channel: tiny.cc/JoniK
► Tue videoiden tekoa/Support my channel (osta jotakin/buy anything):
tiny.cc/Ebay1 (Ebay) (AliExpress)
► Kanavajäsenyys/Channel membership:
tiny.cc/jasenyys
► Lahjoitus/Donate:
paypal.me/jonik1 (PayPal)
#jonik #puntodemobuild #team160db #autohifi #caraudio
Facebook: / suomenautohifiharrastajat
/ puntodemobuild
/ team160db
Instagram: / jonikallioniemi
/ puntodemobuild
Assembly video🔧:
th-cam.com/video/qAiUTrEGkW4/w-d-xo.html
Ok
Plastic ball cage is the weak link.
Yes that's correct
AYYYY MY BOII! Nice to see u here! I'm boutta use one of these for my 1/2 ACA Hurricane MKII. I will have it driven at 5,970 rpm to match the 199hz of the ACA hurricane's 3 lobe blower! I did some math and assuming this actually moves 500cc's each revolution, i should be getting 105.4 CFM airflow
Keep up the good work Jonik making killer TH-cam videos
The video is recorded mirrored. For a minute I was thinking, “What the!”.
😃
i just buy a new one but evey one part market ant the same Doing that wouldn't be worth a 100 bucks my time.
Was the timing gear case filled with oil, or just a light coating of oil? Did you remove the oil previously? Industrial blowers have an oil-filled gear case, with an oil change interval specifically for the blower.
Yes there was about 100ml of oil
hi when you buy the amr500 the pulley which is above the original boost how much? I would like to boost 0.5bar which pulley should I take? my engine is a 1.5l
Standard pulley should work fine
mine does not rotate that smoothly... shit
sangat teliti dalam pekerjaan nya...terima kasih vidio nya..🙏🙏🙏
Hi! I just bought for my 1.2 ltr engine with 81 hp I have seen many people saying that the noise of the Supercharger is very annoying do you know what to do to reduce it ??maybe using a muffler? And if it is reliable with stock internal? How much hp do you think it will Increase? Also love your videos they inspired me 😋
Place the supercharger after throttle body, it makes the whine a lot quieter. Yes it should work fine with low boost. Horse power depends on boost, with 0.5bar boost you have 1.5x power etc. With same pulley ratio as I have you should see about 140hp 😊
@@JoniK1 now that's exciting I was wondering in doing a a12 Datsun motor has 78hp give or take my goal at least 120hp to keep up with today's traffic the cars only 2100lbs so I'm sure it'll be quick
Awesome video man love the supercharger kit you made, your other video showed you started with 85whp and ended up with 145whp,60whp increase is a ton of power, try making that with bolt ons. You said the amr500 lasted a year right.
If they had made it possible to add on a oil cooler it would have probably lasted longer.
How many hours or miles did the previous owner have on the Supercharger? Any idea? How long can they Really last ?? Thanks for videos
Hard to say
Nice vídeo! I just bought this supercharger for my 1600 air-cooled engine! Did you find out what kind of bearings it uses? Since I bought it used, it would be nice to install new bearings before any use! Thanks
This is very helpful and informative. you did a great job
Hi Jonik ! Can you share here the references/dimensions of the bearings ?
Hi! Check my assembly video: th-cam.com/video/qAiUTrEGkW4/w-d-xo.html
Klo mau dapat bering super charger arm 500 pesanx dimn diindonesia susah cari beringx tolong infox
Is there a way to maybe custom make a set of twin scrolls for this to increase the boost?
Maybe 😃
or just put a smaller pulley on, then u wil have more boost
Nice...
Porque cojones le pones titulo en español si el video es inglés.
Perhaps it would be good to install a better quality of bearing right after purchasing one?
Nice video, but if you can help me i have an 1.8 ltr the engine 97 Hp and max RPM is 6000, if i install this AMR 500 will be a good idea or this supercharger cannot supply my engine?
Thanks! It works fine up to 150hp 😊
th-cam.com/video/w_0cQfNnYU0/w-d-xo.html
Thanks for the Video!!
soot rikottanut sen! :)
Is this the supercharger form the Punto? Seems like the flanges are the original ones, not the custom ones you made. Have the bearings fail this quickly?
This is the old one which broke in summer, flanges are taken from new one
@@JoniK1 I'm quite interested in this as I have a Yaris 1.5 that would benefit from it. However, I'm quite scared about the reliability of them. Maybe getting a used Subaru one would be better? What do you say?
BTW - nice work, very informative - keep it up :D
@@mariuszanfir5970 That's why I'm upgrading to Eaton soon, check my posts for pics 😊
Use penetrating oil wd-40 when dismantling bearings.
Tampereen laakerikeskus, siellä ainaki on jos jonkinmoista kilkettä. 👍
AMR500 ball screw application!
Could you Tell us, what bearings are or sizes? Many thaks!
I have assembly video as well
I need a cnc and modeling expert that can modify this gearbox so I can adapt it to something else, anyone interested?
Why do you need to modify the gearbox? All it does is keep the lobes of the supercharger in time.
@@kylec.5462 It's for something I'm building/designing.
Isn’t there suposed to be 90ml of gear oil or so?
Yes about 100ml 😊
@@JoniK1 Okay! :) Keep going!! ;)
IT SUCKED THE OIL AND THE GEARS RAN DRY I GUESS....THEN IT ATE THE BEARING CAGES ...MAYBE THE OIL LEVEL NEEDS TO BE VERIFIED EVERYTIME
justiin tälläsiä videoita on kiva kattoa mihnä näytetään ku tehään ja miten. lisää tälläsiä!
Tätä videota multa on toivottu useampaan otteeseen kun ei TH-camsta aiemmin löytynyt 😃
@@JoniK1 samalla tavalla teet hifienki rakennus pätkiä niin varmasti kasvaa katsoja määrät ku porukka haluaa varmasti oppia miten rakennetaan. 😁
Suurin ongelma on vaan se ettei kukaan kato näitä kokonaan, yleensä vähän alkua ja sitten skipataan suoraan loppuun. Parhaiten katotaan noin 5min videoita. Piti nyt tänkin videon statsit vilkaista, keskiarvo katseluaika 4min. Onneksi Jyrkkä tekee tollasia videoita lähes joka päivä niin ei ite tartte 😃
@@JoniK1 outoo.. kyllä minä ainaki videot katon loppuun saakka ku kerran alotan :D
nakkaa mulle messengeris laakereitten mitat niin käväsen kysyys tuosta yhestä liikkeestä.. sieltä löysin yheen omaanki vekottimista ku muualta ei löytyny :D
Where did you buy it?
so i won buy amr500
sitte ku tuo on kunnos niin alkaa tupla supercharger rakennus? :D
kannatetaan :D
Yhellä laturilla se muuten onnistuiskin kohtuu helposti 😃
Is the video mirrored or is it just me
Yes it's filmed with phones front camera
Tuo on sen verran paskana, että ei kannata korjata enään. Ei maksa vaivaa tuo remontti. Ja jos meinaat vaihtaa vaan toisen päänlaakerit, niin ei sitten ole kovin pitkäikäset. Tuolla on pesät aivan loppu ja roottorit pitäis koneistaa ja vaihtaa uudet hiilikuitu levyt.
Sain tästä videosta pienen korvauksen eli kasaan myös ja sain sen eilen jo tehtyäkin. Joo nuo hajonneet laakerit vaihdoin uusiin. Toisen puolen isompaa laakeria ei valmisteta enää niin jätin toisenkin vaihtamatta. Ne toki tarkistettiin samalla kun hain uudet laakerit ja oli riittävän hyvät. Tiedossa on kyllä ettei tästä uutta vastaavaa tule mutta olihan tämä ostettaessakin jo 20 vuotta vanha 😃
Mo
Onko täällä kellää kokemuksia noista kiinan kopio amr500 ahtimista? Alle 150 sais mutta olis mukava jos se vaikka sen vuoden kestäis ajossa 🤔
Mulla on, löytyy videoitakin vaikka kuinka 😃
@@JoniK1 pitääpä tutkia kanavaa tarkemmin!😎
Ja mihinkäs ne kuulat on menneet..ei kait kohti sylintereitä..
Maasta ne kaikki löyty 😃
@@JoniK1 hyvä sit...
Great video. Did you put 80w90 in the gearcase? There is supposed to be some added on install
Yes about 100ml
Number of oilseal?
Check my assembly video
what size bearing supercharger amr500?
Väärät öljyt tekee tollasta
Oikeat tai ainakin suositellut öljyt tuolla oli sisässä ja kyllähän tuo kohtuu kauan kestikin, näillä kuitenkin ikää se +-20 vuotta. Kokeilin silloin lopuksi kun alkoi pitämään ylimääräistä kolinaan vielä astetta jäykempää öljyä mutta siinä vaiheessa oli laakerit jo hajalla. Ei muuten löydy enää mistään noita kahta ehjää laakeria tai siis samoilla mitoilla, noita hajonneita kyllä saa
@@JoniK1 ei mistään SKF liikkeestä tai jostain tilaamalla sais laakereita
Vuorenmaa Lapua. Jos sieltä ei löydy oikeita laakereita niin sitte niitä ei ole edes valmistettu
Can I have your pulley 😬
How many miles till the super charger broke
This one didn't last long, it was hard to spin already when I got it
Hyvä video!