hello, I have a problem, the light won't turn on when it gets dark, and I have a problem with the power supply, I charge it with an xed-5013s power adapter, what could be the problem, I apologize for the bad English
I hope your ok, have you checked the voltage at the camera to make sure this is ok? And to check the IR LED work , change the mode from auto to night more to force them on
Great tutorial. Is there a way to send the license plate number to a third party database or an outside system? (Standalone mode- Without using NVR and hikcentral)
Hi and thanks , we have some integration with Zatpark system and we have a full SDK and can use ISAPI to get the data into a 3rd party system , does that help?
@@DVSLTD but, this means that an external application has to pull out the data, right? Why not sending a http(s)-request with all parameters, or (better) a post request with a picture and all the data?
Nice demonstration. I have seen your car just going at low speed probably between 20-30km/hour at night. How about the result in IR at night when the car goes at 80-100km/hour, are the numbers plates readable in same camera at high speed. Need your useful advice on that.
@@DVSLTD Thanks for the advice. Just saw some more videos on shutter speed after your advice. What was your shutter speed in the demo or you went with the default values and for this model camera what can we put maximum shutter speed to capture the clear number plate of a car moving on highway at a speed of 120km/hour with Infrared is ON. As this is our current requirement.
@@YasirIslam01 Hi , mine was set at 2000 , but you can play around with it to get the best results as each deployment can be different , can you loan one of your local HIK Rep or distributor and then you can check it works and your happy and don’t have to commit to the cost of the unit ,
Hi, you have any knowledge on whether the iDS-TCM403 is available or if not when it will be released? Even the iDS-TCM203 looks to be very difficult to source and find a price for online. But I need the 403 for the extra MegaPixels and to run dff 12V power
Hello, I have just taken 1 ampere camera from India. Its model number is tcm 203 I have to configure it. i use hik Central and pstor with both license and I wanted its complete installation configuration and features in a new way. Please help me sir and how to capture number plate and how to export report and black list configuration and with firmware support with nvr model
hello Dvs , thanks for all , im ammar from iraq , i have question when i connect ANPR to NVR 7608NI-K1 and search the cars , i cont find it , can you help me
Hello, I need, help me, with the following. How do I perform a factory reset to the iDS-TCM203 camera. Another question. How does the reset button work? the one located next to the micro SD Greetings and thanks
reset button if you hold it down and power camera up and then wait for 20secs and release it will factory default it, to do web reset under system tab select the option for factory default
I’ve been racking my brain on one of the capabilities of the camera but not sure which video it was I heard it on. There was the ability for the camera to only view reflected light and not direct lighting…. If I heard right PLEASE ease my brain…. How does this feature/ability work. I not in the field at all and don’t know optics very well but I’m very curious on how this is achieved.
Hi and thanks for the comments, actually we can read plates in the day time with no issues, in the night we use IR LED , and we set the exposure level to quite high, this negates the headlight effect and allows us to reflect and then read the plate detail using OCR
Hi sir, I need a camera for night vision on road traffic. (20 to 20m distance I need a clear image for which brand vehicle, driving person, human face and structure). Give a good and the best support camera for my need. Thank you..
2:08 - "Colour and make of vehicle is being worked on," and here we are in late 2022 and it is still being "worked on". Truth be told it is totally useless at detecting make. Most of your detections will be something obscure like a random truck.
Does it require to insert sd card for detecting license plate? When i placed my camera over the bridge and ran the internet explorer it did not let capture ay license plate numbers? The footage was good just curious why, i did not had a sd card in the camera. please help. Rah from Chicago. Thanks
Hello, I want to use this camera in Shopping Malls, for Parking entry and exit, what is your suggestion to use for car and bike. What should be the height and distance. what should be done for night time incase of head light is on? Please suggest.
Thank you so much for sharing these great videos with us!! I’m having problem with push notifications from the LPR blacklist or white list. I would love to have this feature up and running but for some reason it doesn’t work. I spent five days already with five or six different Hikvision Tech Support guys on the phone and every time I hear different suggestions since no one really knows why it shouldn’t work. The last Tech Support from Hikvision told me that currently push notification for LRP (White list and blacklist options) are not available yet. Not directly from the camera and not even through the NVR. And the only option he told me is email notification. Could you please confirm if this is true or perhaps if you know the process would you please share with us?
Hi , and sorry to hear you had so much issues, actually its email at this point , we are looking to include this but for now it does only work via the email , sorry to have caused so many issue , I will chase it up for you 😊
Hi , the 7 line Camera DS-2CD7A26/P model will work , albeit we recommend the NVR For the ANPR camera for all functions , but Turbo will save plate Data still
Hi Dave! Thank you for the video! I would like to ask how can I set up this model for constant licence plate recognition. not to leave the live view open all the time if I have more than 5 cameras
you can add to an I series NVR and this will record all plates across all cameras and allow search and export , and also you could use HIK-Central as the software interface if you wanted a nice interactive piece 😊
se ven pocos vídeos mostrando la cámara en la oscuridad como emiten ese haz de luz roja (ir led) lo cual hace la cámara totalmente detectable y siendo fácil de inutilizar no entiendo porque no aplican leds IR de 940nm . Para mi las cámaras en cuestión fallan en que no dispone de IRled de 940nm por lo que e la oscuridad la cámara será bastante llamativa y accesible (emite una serie de luces rojas) pudiéndola destrozar o robar o inutilizarla. Las cámaras deberían llevar un sistema de IRleds que en la oscuridad no se iluminasen en el mercado ya hay modelos que utilizan leds de 940nm los cuales no emiten ningún tipo de luz en la oscuridad y por tanto hace que las cámaras pasen mejor desapercibidas, es importante que dispongan de WDR, IRCUT, P2P, codec H.265 o H.265+, conexión POE, wifi , aspectos como sensor PIR, PTZ, son cuestiones a valorar y que mejoran bastante la seguridad
gracias por los comentarios, este video y otros que he producido muestran el video por la noche y qué tan efectiva se vuelve esta unidad en su captura incluso con la luz intensa que se alimenta a la cámara, no estoy seguro de en qué país reside, pero el Reino Unido no tenemos el problema de que las cámaras se destruyan debido a los leds IR rojos, tenemos millones de cámaras de CCTV implementadas que serían más accesibles y, por lo tanto, destruidas por lo que está reclamando, y simplemente no, tal vez su región tenga un problema diferente, pero entonces usted necesitaría que todos los CCTV estándar sigan la misma regla, con ANPR generalmente también los ajustamos más arriba o en postes que los hacen más difíciles de acceder por naturaleza, ayudando nuevamente a resolver el problema que describió, también podemos obtener unidades con una longitud de onda de 940 nm si el proyecto lo exige, pero la distancia IR efectiva se reduce al usar esta longitud de onda, pero gracias por el comentario que apreciamos, el español no es mi lengua materna, así que disculpe si esto no está bien establecido.
@@DVSLTD bueno hay modelos de DAHUA UIR con leds de 940nm que la distancia es muy considerable y se está viendo que cada vez se está implementando más este sistema por seguridad, tenga en cuenta que en muchos sitios no se puede colocar en zonas muy alejadas o alturas determinadas.
just mout the lights cube cree 1200x4 by led on a plate mount cam cant c anything and tun on when passing the cam i use flat numbers paperthe plate to trich the cam sun tan lotion helps block IR reflect to and IR lights mounted facing fwd work just fine for me
Thank you , we can offer a solution but it varies on the installation type and parameters , it’s the CSR Radar device HIK make and the IDS-TCV product line , you will need to involve the local HIK team to put a solution together
currently this model doesn’t have the Wigand output , we have another model that does have this function , it has white list function , we are in the process of improving this
Thanks for the time you put into the review. I am new to the lpr setup. Can you say if this model will work in Jamaica or is the algorithm region specific?
Hi , and thanks for the feedback, a lot of countries are supported , I would ask your local HIK Rep to confirm as I don’t have this listed as supported but you probably will find it is
@@DVSLTD Thanks for your reply. Unfortunately the division dealer here does not carry these models.They mainly carry the entry to mid level models so I have to seek information elsewhere. Is there any info that I can send you to determine if the camera would capture the license plates here in Jamaica. I have a customer that is interested in this system for two gated communities. I would greatly appreciate any help you can offer. Thanks
@@DVSLTD My meaning is different. I not talking about detecting the speed of the car. I am talking about the max speed of the car for the place the be readen by the camera. I got a catalog which says the iDS-TCM203-A/0832 top reading speed is 165 Km/h. Is it the thruth? Did you test it with such a fast car speed? Thank you
@@andreaalberton6286 Ah ok , we haven’t tested that speed personally but we have install partners install them onto highways and get accurate reads 120Kph , I would say it would perform as suggested by hik under the settings suggested
@@DVSLTD Thanks dvs for reply, I am able to see the controls for PTZ but when I pressed zoom button nothing is happening. Could this piece be faulty one?
@@kask198 Hi , I wouldn’t think so , I have not seen a faulty one , are you using Internet explorer 11? , I would default the camera and try again , does that then work ?
Hi , the IDS-TCM is a higher performance model for traffic applications , its accuracy is higher , and the new 4MP is higher image quality over the 2MP 7 line, that said we get extremely good results just using the 7 line model and this is the go to product to start
@@DVSLTD Sir thank you for your reply. please advise that does 2MP 7 line camera with heater have option to turn on/off the heater or heater remains ON all the time? also what is a purpose of heater in DS-2CD7A26G0/P-LZ(H)S or DS-2CD7A26G0/P-iZ(H)S ? please reply i am just waiting for your advise before buy. kind regards
hello, I have a problem, the light won't turn on when it gets dark, and I have a problem with the power supply, I charge it with an xed-5013s power adapter, what could be the problem, I apologize for the bad English
I hope your ok, have you checked the voltage at the camera to make sure this is ok? And to check the IR LED work , change the mode from auto to night more to force them on
IT IS NONE, THAT IS THE THIRD SOLUTION THAT IT IS WRONG?
Gracias, desde chile
Полезный ролик. Спасибо.
без проблем, спасибо
Great tutorial.
Is there a way to send the license plate number to a third party database or an outside system? (Standalone mode- Without using NVR and hikcentral)
Hi and thanks , we have some integration with Zatpark system and we have a full SDK and can use ISAPI to get the data into a 3rd party system , does that help?
@@DVSLTD but, this means that an external application has to pull out the data, right? Why not sending a http(s)-request with all parameters, or (better) a post request with a picture and all the data?
Nice demonstration. I have seen your car just going at low speed probably between 20-30km/hour at night. How about the result in IR at night when the car goes at 80-100km/hour, are the numbers plates readable in same camera at high speed. Need your useful advice on that.
Hi , this was around 30Mph , and you can set the shutter speed depending on the vehicle speed, it will be rated up to this speed also that you require
@@DVSLTD Thanks for the advice. Just saw some more videos on shutter speed after your advice. What was your shutter speed in the demo or you went with the default values and for this model camera what can we put maximum shutter speed to capture the clear number plate of a car moving on highway at a speed of 120km/hour with Infrared is ON. As this is our current requirement.
@@YasirIslam01 Hi , mine was set at 2000 , but you can play around with it to get the best results as each deployment can be different , can you loan one of your local HIK Rep or distributor and then you can check it works and your happy and don’t have to commit to the cost of the unit ,
@@DVSLTD Thanks for your time and advice. Much appreciated. Have a nice day ahead.
Hi, you have any knowledge on whether the iDS-TCM403 is available or if not when it will be released? Even the iDS-TCM203 looks to be very difficult to source and find a price for online. But I need the 403 for the extra MegaPixels and to run dff 12V power
Hi , we are selling the IDS-TCM403 in the UK now actually , if your in the UK then all ok 😊
Hello, I have just taken 1 ampere camera from India. Its model number is tcm 203 I have to configure it. i use hik Central and pstor with both license and I wanted its complete installation configuration and features in a new way. Please help me sir and how to capture number plate and how to export report and black list configuration and with firmware support with nvr model
For HIKVISION ANPR CAMERA
Hi hari , that is too complex to explain over the comments , have you asked the distributor for help?
How much is the IR focal length?
For plate reads we say 30mtrs on the 8-32mm model
what if vehicle go fast? can it detect? also what about bike?
It can do fast moving vehicles yes of course, and bikes if the plate is visible and legal ,
@@DVSLTD Sir very glad that you answered. 1 more thing, can it show the biker and passenger faces at night? thanks again
HIK Camera have c# sdk?
Dear sir,
how much is this Camera
Vehicle brand… Porsche / Benz 😂😂😂😂😅😅
hello Dvs , thanks for all , im ammar from iraq , i have question when i connect ANPR to NVR 7608NI-K1 and search the cars , i cont find it , can you help me
Hello, I need, help me, with the following. How do I perform a factory reset to the iDS-TCM203 camera.
Another question. How does the reset button work? the one located next to the micro SD
Greetings and thanks
reset button if you hold it down and power camera up and then wait for 20secs and release it will factory default it, to do web reset under system tab select the option for factory default
How can i create new channels to use with RTSP protocol?
I’ve been racking my brain on one of the capabilities of the camera but not sure which video it was I heard it on. There was the ability for the camera to only view reflected light and not direct lighting…. If I heard right PLEASE ease my brain…. How does this feature/ability work. I not in the field at all and don’t know optics very well but I’m very curious on how this is achieved.
Hi and thanks for the comments, actually we can read plates in the day time with no issues, in the night we use IR LED , and we set the exposure level to quite high, this negates the headlight effect and allows us to reflect and then read the plate detail using OCR
Hi sir, I need a camera for night vision on road traffic. (20 to 20m distance I need a clear image for which brand vehicle, driving person, human face and structure). Give a good and the best support camera for my need. Thank you..
Do you know if there is a colour night vision of this kind of camera? Incredible tech this cam
Hi. Excellent explanation. Congrats. Do you know how to access LPR data over ISAPI? I can't find documentation of this product. Tnks
yes but you need to register to gain the information now - link here tpp.hikvision.com/
2:08 - "Colour and make of vehicle is being worked on," and here we are in late 2022 and it is still being "worked on". Truth be told it is totally useless at detecting make. Most of your detections will be something obscure like a random truck.
Does it require to insert sd card for detecting license plate?
When i placed my camera over the bridge and ran the internet explorer it did not let capture ay license plate numbers? The footage was good just curious why, i did not had a sd card in the camera. please help. Rah from Chicago. Thanks
Hello, I want to use this camera in Shopping Malls, for Parking entry and exit, what is your suggestion to use for car and bike. What should be the height and distance. what should be done for night time incase of head light is on? Please suggest.
Thank you so much for sharing these great videos with us!!
I’m having problem with push notifications from the LPR blacklist or white list. I would love to have this feature up and running but for some reason it doesn’t work. I spent five days already with five or six different Hikvision Tech Support guys on the phone and every time I hear different suggestions since no one really knows why it shouldn’t work. The last Tech Support from Hikvision told me that currently push notification for LRP (White list and blacklist options) are not available yet. Not directly from the camera and not even through the NVR. And the only option he told me is email notification.
Could you please confirm if this is true or perhaps if you know the process would you please share with us?
Hi , and sorry to hear you had so much issues, actually its email at this point , we are looking to include this but for now it does only work via the email , sorry to have caused so many issue , I will chase it up for you 😊
DVS any update on this feature please?
Hi! Excelent video. It's seems that you know a lot about traffic monitoring cameras. It's possible to contact you for a technical advisory service?
I recently saw your social media contact information. I will do it for that way. Thanks!
Hi Andres, we can try to help askdvs@dvs.co.uk
Thank you for a very useful video. Your recommendations helped me for adjusting the exposure of the camera in the dark
Hi. What's the best anpr camera for the hikvision turbo dvr?
Hi , the 7 line Camera DS-2CD7A26/P model will work , albeit we recommend the NVR For the ANPR camera for all functions , but Turbo will save plate Data still
Old interface and no POE... seems like a strange step-backwards from their last ANPR camera model. the performance is fantastic however
New update model has POE , this model didn’t that’s all , a lot of the intelligent stuff has the simpler interface
Hi Dave! Thank you for the video! I would like to ask how can I set up this model for constant licence plate recognition. not to leave the live view open all the time if I have more than 5 cameras
you can add to an I series NVR and this will record all plates across all cameras and allow search and export , and also you could use HIK-Central as the software interface if you wanted a nice interactive piece 😊
se ven pocos vídeos mostrando la cámara en la oscuridad como emiten ese haz de luz roja (ir led) lo cual hace la cámara totalmente detectable y siendo fácil de inutilizar no entiendo porque no aplican leds IR de 940nm
.
Para mi las cámaras en cuestión fallan en que no dispone de IRled de 940nm por lo que e la oscuridad la cámara será bastante llamativa y accesible (emite una serie de luces rojas) pudiéndola destrozar o robar o inutilizarla. Las cámaras deberían llevar un sistema de IRleds que en la oscuridad no se iluminasen en el mercado ya hay modelos que utilizan leds de 940nm los cuales no emiten ningún tipo de luz en la oscuridad y por tanto hace que las cámaras pasen mejor desapercibidas, es importante que dispongan de WDR, IRCUT, P2P, codec H.265 o H.265+, conexión POE, wifi , aspectos como sensor PIR, PTZ, son cuestiones a valorar y que mejoran bastante la seguridad
gracias por los comentarios, este video y otros que he producido muestran el video por la noche y qué tan efectiva se vuelve esta unidad en su captura incluso con la luz intensa que se alimenta a la cámara, no estoy seguro de en qué país reside, pero el Reino Unido no tenemos el problema de que las cámaras se destruyan debido a los leds IR rojos, tenemos millones de cámaras de CCTV implementadas que serían más accesibles y, por lo tanto, destruidas por lo que está reclamando, y simplemente no, tal vez su región tenga un problema diferente, pero entonces usted necesitaría que todos los CCTV estándar sigan la misma regla, con ANPR generalmente también los ajustamos más arriba o en postes que los hacen más difíciles de acceder por naturaleza, ayudando nuevamente a resolver el problema que describió, también podemos obtener unidades con una longitud de onda de 940 nm si el proyecto lo exige, pero la distancia IR efectiva se reduce al usar esta longitud de onda, pero gracias por el comentario que apreciamos, el español no es mi lengua materna, así que disculpe si esto no está bien establecido.
@@DVSLTD bueno hay modelos de DAHUA UIR con leds de 940nm que la distancia es muy considerable y se está viendo que cada vez se está implementando más este sistema por seguridad, tenga en cuenta que en muchos sitios no se puede colocar en zonas muy alejadas o alturas determinadas.
just mout the lights cube cree 1200x4 by led on a plate mount cam cant c anything and tun on when passing the cam i use flat numbers paperthe plate to trich the cam sun tan lotion helps block IR reflect to and IR lights mounted facing fwd work just fine for me
Does this camera model recognize motorcycle's plate number?
Yes it does 😊
If placing this at the entrance to capture number plates does it have to be at a certain height?
I have tested it at various heights, between 2.5-4mtrs works well , but I have seen them mounted at 1mtr , this one jn the video is 6mtrs high
Thanks for your video. it really helping. Kindly help me, you suggest ANPR camera with vehicle speed recording.
Thank you , we can offer a solution but it varies on the installation type and parameters , it’s the CSR Radar device HIK make and the IDS-TCV product line , you will need to involve the local HIK team to put a solution together
What about Weigand output? How to open barriers based on whitelist etc?
currently this model doesn’t have the Wigand output , we have another model that does have this function , it has white list function , we are in the process of improving this
hello sir, your video very helpful for me, can you recommend for me type of NVR that support for ids-tcm403a ? thanks
the I series and IDS Series will support it 😊
@@DVSLTD well noted sir. thanks again 😊
Hello, where you find the firmware update ? I just have the version 4.2.2 180608. And i see you have 4.2.2 190411.
They're not on the portal , it’s tweaked for UK , are you in the UK ?
@@DVSLTD no, i'm in Portugal. But in portal i can't find the firmware for this model
Seems to be for commercial use , any recommendation for simular spec but for domestic use, ???
Hi , yes this is aimed at commercial use , for domestic you can use the DS-2CD7A26G0/P-IZS model , very good performance still
@@DVSLTD ok how much does that cost ???
How much is this camera. And where to buy. I can't seem to find this camera for sale for US customers.
Please tell me what kind of contact from the camera is needed to control the gate by car number?
sir what software you use with this camera Hikcentral or IVMS 5200 E or any other and dose it support ANPR function with I series NVR ??
Hi , you can use it with IVMS-5200 parking version or HIK-Central, depending on the requirement IVMS-5200 parking has the most control 😊
DVSLTD did you test HikCentral-E?
HikCentral -E also release now
@@muhammadahtesham5231 Hi , not yet , it’s not released into the UK as of yet 😊
DVSLTD but it’s available on HIkvision overseas website www.hikvision.com/en/VMS/Support/Download/HikCentral-Enterprise
Whats the price in relation to the 4 and 7series darkfighter ANPR ?
pleeeease look at the lens when recording instead of the viewfinder!
huh?
@@DVSLTD when you are talking to the camera your eyes are not looking at the lense. Your eyes appear to be looking at something else.
@@ElevatedEyes2023 Thanks, sometimes that happens, but thanks for the feedback
@@DVSLTD I could care less where you look lol. Other people seen to care though. It was a great video either way. I'm glad I found your channel.
@@ElevatedEyes2023 Ah I see , thanks for the feedback and have a great weekend 😊
Thanks for the time you put into the review. I am new to the lpr setup. Can you say if this model will work in Jamaica or is the algorithm region specific?
Hi , and thanks for the feedback, a lot of countries are supported , I would ask your local HIK Rep to confirm as I don’t have this listed as supported but you probably will find it is
@@DVSLTD Thanks for your reply. Unfortunately the division dealer here does not carry these models.They mainly carry the entry to mid level models so I have to seek information elsewhere.
Is there any info that I can send you to determine if the camera would capture the license plates here in Jamaica. I have a customer that is interested in this system for two gated communities. I would greatly appreciate any help you can offer.
Thanks
@@MIKE-il6mu Sure let me check for you now 😀
Nice video, well done. What's the top license plate detecting speed? I mean the max speed of the veichle. Thank you
Hi , thanks for the feedback , this model doesn’t have the RADAR connected so it’s just plate and vehicle colour and make ( but not at night )
@@DVSLTD My meaning is different. I not talking about detecting the speed of the car. I am talking about the max speed of the car for the place the be readen by the camera. I got a catalog which says the iDS-TCM203-A/0832 top reading speed is 165 Km/h. Is it the thruth? Did you test it with such a fast car speed? Thank you
@@andreaalberton6286 Ah ok , we haven’t tested that speed personally but we have install partners install them onto highways and get accurate reads 120Kph , I would say it would perform as suggested by hik under the settings suggested
Great piece of kit ,, seems to be for commercial, use, what lpr camera would you recommend for domestic use?? & cost.
Where can I purchase these cameras? Are they less than $1,000?
Could anyone please explain how to change the focal length or zoom of this camera.
Hey, via the camera web browser , just login and on the live view page you will see the PTZ control on the right hand side 😊
@@DVSLTD Thanks dvs for reply, I am able to see the controls for PTZ but when I pressed zoom button nothing is happening. Could this piece be faulty one?
@@kask198 Hi , I wouldn’t think so , I have not seen a faulty one , are you using Internet explorer 11? , I would default the camera and try again , does that then work ?
Sir does DS-2CD7A26G0/P-LZ(H)S video quality is good and clear like IDS-TCM? please advise. thanking you
Hi , the IDS-TCM is a higher performance model for traffic applications , its accuracy is higher , and the new 4MP is higher image quality over the 2MP 7 line, that said we get extremely good results just using the 7 line model and this is the go to product to start
@@DVSLTD Sir thank you for your reply. please advise that does 2MP 7 line camera with heater have option to turn on/off the heater or heater remains ON all the time? also what is a purpose of heater in DS-2CD7A26G0/P-LZ(H)S or DS-2CD7A26G0/P-iZ(H)S ? please reply i am just waiting for your advise before buy. kind regards
Nice videos as like always
Thank you :)
Really excellent presentation Dave.....!
Thank you :)
Great review thanks
Thanks for watching!
Going through the settings is genius.
Thank you
We want to develop application, please give pointer to the programming manual and API listing of ANPR camera.
Hi , you will need to register this with HIK on there online portal , do you have a local HIK BDM you can ask~?