Hello! So my machine foot is only lifting 1/8 of an inch while I'm sewing. Will this adjustment fix that? I'd like it to lift about a quarter of an inch between stitches.
I bought an Ikonix 8700B. I wish that I had bought a Jukie. There is no information on my machine. First time use and my foot is stuck in the up position. Any ideas how to fix this?
This worked, thank you! I have another question :) I have that same foot with the black wire coming out and down. Can I just snip those wires off? They bothers me.
The safety guard will just pull out of the holes just remove the foot grab the guard with pliers and remove from holes it’s perfectly fine to remove they are annoying
not sure if you read comments over a year old but will give it a try. I have a du1181n been having it for a couple weeks .. I'm just now seeing this and was wondering about what you said about the pressure foot. You said something about it not really mattering whether the foot is down or up while you're not using it? I have a tl 2010q and I was always told to keep the foot up or your feed dogs will mess up.
While using the presser foot lifter on the top of my machine the other day the foot dropped and will no longer work unless I use the knee lift. Please help!
I have this machine and I was messing with the tension because I started sewing with slightly a thinner material. Not too thing but, now it is making this loops on the bottom thread every five stitches or so. Do you know what botton I need to adjust?
Loops every once in a while is hard to diagnose. I would check to make sure the thread is in between the tension discs all the way. Sometimes when we thread the machine with the presser foot in the down position, we do not get it (the thread) all the way into the discs, which can cause an inconsistent stitches.
Hello! So my machine foot is only lifting 1/8 of an inch while I'm sewing. Will this adjustment fix that? I'd like it to lift about a quarter of an inch between stitches.
I bought an Ikonix 8700B. I wish that I had bought a Jukie. There is no information on my machine. First time use and my foot is stuck in the up position. Any ideas how to fix this?
This worked, thank you! I have another question :) I have that same foot with the black wire coming out and down. Can I just snip those wires off? They bothers me.
The safety guard will just pull out of the holes just remove the foot grab the guard with pliers and remove from holes it’s perfectly fine to remove they are annoying
Thank you so much
I have brother Exedra DB2-B737-403 and my pressure foot don’t go high enough, so I guess mechanically it’s a bit all the same😅
Konsa company ka dagha hai or suta ..
not sure if you read comments over a year old but will give it a try. I have a du1181n been having it for a couple weeks .. I'm just now seeing this and was wondering about what you said about the pressure foot. You said something about it not really mattering whether the foot is down or up while you're not using it? I have a tl 2010q and I was always told to keep the foot up or your feed dogs will mess up.
While using the presser foot lifter on the top of my machine the other day the foot dropped and will no longer work unless I use the knee lift. Please help!
Thank you for this video, it has been of lots of help.
You are welcome.
Thanks for yours videos!
Get an assistant please. You deserve it.
Hi Steve can you help me please.?
I have this machine and I was messing with the tension because I started sewing with slightly a thinner material. Not too thing but, now it is making this loops on the bottom thread every five stitches or so. Do you know what botton I need to adjust?
Loops every once in a while is hard to diagnose. I would check to make sure the thread is in between the tension discs all the way. Sometimes when we thread the machine with the presser foot in the down position, we do not get it (the thread) all the way into the discs, which can cause an inconsistent stitches.
Thanks you very much for your video it’s helping me a lot
You are most welcome. Thank you fro watching.
Please tell me details DU 1181N machine
I bought one from Steve last month. It's really great. sewinggold.com/product/juki-du-1181n/
Dear Mr Steve
Can you blindly show me how to adjust feed dogs forward/ backward, upward and downward on a singer 20u sewing machine.
Thanks
I meant kindly, not blindly
We will try and do it when we have some free time.