Liquid Moly Molygen with Ceratec Ceramic Wear protection.

#liquidmoly
#ceratec
#Molygen
#johnnyscarbon
Lot of 4x Liqui Moly Cera Tec CERATEC Ceramic Wear protection reduces friction.
For engines, manual transmissions, pumps and compressors. Is added to the respective oil. Self-mixing. Sufficient for 5 liters of oil. With a long-term effect lasting around 50,000 km. Suitable for toothed belts running in oil. Not suitable for use with wet clutches!
[e-mail]
I want your support my friends, subscribe to my channel thank you very much.

[@ajnanyc]

It seems there are some conflicting opinions regarding the mixing of Molygen with Ceratec. I contacted Liqui Moly directly and one of their application engineers commented - "Our Molygen New Generation motor oils already contain additional chemical agents for extra wear protection and friction reduction. The formulations are well balanced, proven and work perfectly as they are.
Because of that we do not recommend adding Cera Tec to our Molygen New Generation oils, too. It simply does not add extra value, and it will never cause any additional deposits inside your engine."
So, it will not cause any harm to an engine if mixed, but there are no advantages in doing so, as Molygen has it's own beneficial additives. So decide, on using either one or the other. Hope this clarifies things.

[@shantanuchandra7291]

that's right, even I emailed them and got a similar response.

[@elie2484]

Cera tec puts a protective coating immediately where is just adding molly doesn't do it immediately that's the difference

[@lmalesci]

Greetings from Florence Italy In 2001 on a Suzuki Jimny 4x4 petrol 1.3 with m13a engine I changed the engine oil in 2021 with Liqui Molly Reichtrauf Performance 10w40. In 2022 he changed the oil at 12000 km. The engine oil liquimoly leichtlauf mos2 10w40 is also used as a good lubricant and the liquimoly additive is used to clean the gasoline injection system and valves.

[@vanivancarbong]

Ετσι γίνεται η σωστή συντήρηση.
Μπραβο μαστορα

[@vankolas5684]

👍👍👍👍👍

[@AliMalik-rf1kp]

Liqui moly does not recommend to add ceratec with liqui moly molygen engine oil.

[@johnnyscarbon]

I want you to explain to me why, and if you are an expert on lubricants.

[@sandy30634]

@@johnnyscarbon he is nit the expert, thats why he's not saying, molygen engineers say that they already add additives in molygen, so no need of ceratec or engine oil treatment additive

[@synaptik111]

100% correct @@sandy30634so says a Liqui Moly R&D engineer th-cam.com/video/Yx__NpU6glI/w-d-xo.html

[@BW-kv9wj]

Liqui Moly does not recommend mixing Ceratec with their Molygen oils.

[@johnnyscarbon]

quel spécialiste des informations sur le produit spécifique?

[@sidahmedouabel7417]

@@johnnyscarbon un conseiller de chez liqui moly l'a expliqué...

[@Toonstravelco]

Πώς το βλέπεις φίλε υπήρξε κάποιο προβλήμα με την μιξη τον δύο?επειδή και καλά λένε ότι καλύτερα μην βάζουμε τα δύο αυτά προϊόντα μαζι.. δεν μας εξηγούν το λόγο βέβαια..θα γίνει κάποια ζημια η λόγο κόστους?η λόγο προώθησης τον λαδιών της νέας γενιάς (μολιτζεν)

[@johnnyscarbon]

Γειά σου φίλε μου
Κοίτα φίλε δεν παρουσίασε κανένα πρόβλημα μόνο καλό θα κάνει .
Έχω ενημερωθεί από την εταιρεία και μου είπαν απλά ειναι υπερβολή.
Τα συνιστούν σε απλά λάδια της παραγωγής επειδή δεν περιέχουν κεραμικό.
Πάντως ο κινητήρας δουλεύει ρολόι .

[@DrunkenSailors1]

Ο μηχανικός μου συμφωνεί στην χρήση ceratek με molygen μιας και η λυπαρη επίστρωση που αφήνει το κεραμικό διαρκεί για 30.000 χλμ οπότε μια φορά ανά 3 αλλαγές λαδιου δεν βλάπτει, ζημιά δεν προκαλει για κανένα λόγο. Πάντως η ίδια εταιρία λέει ότι το προσθετο που μπορείς να βάλεις μαζί με το molygen είναι το mso2 additive της liqui moly, συνδυάζονται ωραία παντως στο αμάξι μου ίδια τεράστια διαφορά στην εκκίνηση όταν είναι κρυο το μοτέρ, το πουλανε σε συσκευασία των 125 ml και συμπληρωμα 4% του συνόλου λαδιού του κινητήρα.

[@DunOpondo]

Ceratec + molygen = A NO NO!

[@maouchimohamed3026]

Why ,,,???

[@odontolocko]

se mezcla Moylgen con Motor Protect, no con Ceratec

[@pana.2994]

EXACTLY. !!!

[@toninofranco6861]

Why you nead ceratec in that oil it has additive already in that oil

[@johnnyscarbon]

Welcome.
I know it exists, but it's good especially when you have an upgraded engine.

[@pacogomez9091]

NO se pone así el Ceratec hay que moverlo muy muy muy bien y se pone al motor 🤷

[@Big1_]

Why did you do that? you are losing product in the small bottle and in the big bottle. Just put the Ceratec inside the engine, without exhchaing bottles dude....

[@stormrider01]

It’s the same, are you dumb?