ASUS ROG Gaming Phone Teardown Disassembly Repair Video Z01QD
ฝัง
- เผยแพร่เมื่อ 15 ก.ย. 2024
- Teardown Disassembly video of the ASUS ROG Gaming phone.
Twitter: / pbkreviews
Instagram: / pbkreviews
Patreon: / pbkreviews
TikTok: / pbkreviews
Smartphone Tool Set: amzn.to/3P8yZuD
Smartphone Tool Set Deluxe: amzn.to/3qLq3AU
Home Tool Set: amzn.to/43ZmSUV
Other Tool Sets: amzn.to/43VzDQg
iFixit Isopropyl: www.ifixit.com...
Smallest Smartphone Thermal Camera: www.amazon.com... (use code PBKreviews for $20 off.)
Crypto Hardware Wallets: shop.secuxtech...
Adhesive: amzn.to/2XAvFga
300LSE Adhesive: amzn.to/3pSu40W
Heat Gun: amzn.to/2SOkS0x
Pry Picks: amzn.to/3YbBi0Q
Other Replacement Parts: www.etradesupp...?acc=c5ab0bc60ac7929182aadd08703f1ec6
Thanks for the video. Was able to repair my ROG Phone with it. Asus wanted to repair it for around $400 and with this I only had to pay around $110 for the screen to do it myself.
your welcome glad it was able to help :)
Watching this is very painful.... But still cool video... :)
Thank you :)
any chance u can do a screen replacement video?
Did you crack it ?
No didn’t break it it is blacked out
Silent Anons my screen didn’t crack but the inside of it the oled screen got a hairline crack in it when it was on my bed that’s so annoying now all the screen does is flash
What sucks is that no one sells batteries for this phone I haven't seen any on the market
Not sure how I ended up here but you sir have a new subscriber!
Thank you :)
Thank for this video:)! I was wondering what it actually looks like inside. Good to know that it contains a pretty decent amount of copper.
Your welcome, ya its a very solid built phone.
Is there a special connector for the proximity sensor? Mine does no longer work after a screen replacement...
Great teardown and reassembly on one of the best gaming phones of 2018! Keep it up! Learned a lot from this vid!
Thanks! Appreciate it.
From the inside it looks more beautiful.
Another function of guitars pick
lol yup
This video so helpfull... Thanks dude
Your welcome :)
Great video! I'm wondering how easily (or possible) is it to replace the loud speaker at the top?
Ever get it fixed?
@@winterbugplays yeah but not a great solution. It involves some electrical tape 🤣
Just a tip when taking out the parts that are glued in with the adhesive DO NOT JAM your entire pick in their to attempt to prior out, sure it might be easier but if you don't know the CAD of the phone don't force your way through you might damage some circuits or worse at the expense of making it easier to disassemble.
Yes that is true, however I usually take apart the device once on my own with more care one time around, and then the 2nd time I record it so I know what I'm generally going to be talking about and instructing as well as to speed up the video process and not have a dragged out video. As far as using a pic and going to deep, yes you can always damage any cables or circuits that may be in the way however if there is anything in the way I will usually mention it in the video so people will know not to go too deep in certain areas which can damage something. But thanks for the heads up, I always tend to use caution as much as possible. Any tips and suggestions are always welcome.
*ifixit score* :- _(maybe)_ *2-3* *_/10_*
1:10 *opening Back panel*
3:55 *opening Mid plastic frame & Temoving RGB*
7:01 *Disconnecting wires & Removing main board*
11:51 *Removing camera, bottom speaker assembly, headphone jack and charging port*
14:08 *Reassembly*
what's the white and the black wires for? is the white one important ? I accidentally damaged one of the connectors in opening it 😭
Hey I want to change the lcd only. Can you make a video on that
GG! Most underrated channel on TH-cam！ BTW which phone do you think has a more efficient cooling? Razer or Rog?
Thank you! Honestly I would go with the ROG. Razer phone is good as well, but the ROG has more than one method of cooling it down and the overall design of it and how the cooling is handled makes me believe it would cool it more sufficiently compared to the Razer. The razer primarily bases off its vapor chamber while the ROG has not only the vapor chamber, but the carbon cooling pads and the large area copper heat spreader and on top of that the add on external back cooling body fan.
pwrdbykyank wow that’s really impressive! Thanks for the reply! Wish your channel get the attention it deserves
@@jamesgu1755 Thanks I appreciate it :)
Dude, nice work! Very complicated circuit board design and battery replacement not easy. Production cost for this phone is not cheap either.
Thanks! And yea its very complicated
Yeah circuit board design like an iphone, but samsung? More plastic an low budget phone.
@@KevinRodriguezYT sheep
Thx so much I don't need to ask everythingjerryrig to do it
Your welcome :)
Hi, my Asus Rog Phone dont hold charge and dont power on, what is the cause? I hope you can help me with your profesional opinion.
First of all thanks for the video I have been a technician for years but I have been looking for a video to get an idea how this phone made because the first time it happens to me, and I am very very satisfied so I disassembled it in a moment. An advice please replace the display would be enough an oled lcd or necessarily a service pack ??? THANK YOU SO MUCH
Hi thank you. The display can be replaced itself without the need of a complete frame assembly. Once the phone is taken apart, you can heat up the display and pry it off the frame.
Its beast phone with ip68 i love this killer
Tech Slog it's not ip68
@@2911oscar it has check please
@Tech Slog
how about you check?
www.asus.com/Phone/ROG-Phone/Tech-Specs/
IPX4 splash resistant*
* The ROG Phone has been rated to be resistant to water splashing against the enclosure from any direction. The device is not certified to be waterproof and should not be subjected to being sprayed with or being immersed in water. Users are advised to keep the device from contact with water as far as possible. ASUS does not warranty for any form of water damage.
So would replacing the screen and digitizer require accessing the back? I unfortunately broke the screen and digitizer so I am looking to replace it myself
yea you would need to take it apart to get access to disconnecting the screen cable etc.
i need asus!!
Wow so cool video keep it up bro
Thank you, will do :)
I got one ROG phone in this week.but unfortunately today my phone drop on road and my led crack and blank,screen still survive..now my ROG virgin will be like your bid..😩😩😩
For me too. The build quality is Shit.
bring me back 21 minutes of my life...
I find this phone very cool looking
Ya its a great looking phone
So, how are we going to replace the cracked LCD display? are we going to break everything to reach the LCD? and it cost real expensive.. or is there any simple way to directly replace the broken LCD display without touching as many part as possible? can U explain further more?
Hi, yea the only way to replace the screen would be to disassemble the entire phone so you can disconnect the cable, remove the front screen portion with front assembly and replace it with a new complete screen assembly, and reattach the screen cable to the main board etc. There is no easy way of doing it, and does require time and patience. Basically once you take out the main board and all your left with is the screen, frame, and battery, you would then pry off the battery and put the battery on a complete screen with frame assembly and reassemble the phone. In the future, when parts become more available you will find complete assemblies for the screen for sale online. You will probably find just the screen's alone as well. That would be harder to do since you would have to pry off the screen from the mid frame and then reattach a new screen with adhesive back to the frame, but that's doable as well. Hope this helps
@@PBKreviews I see. Thanks a lot for the prompt reply. I am quite sure the phone will physically degraded over the repair. Maybe scratch during disassembly activity. And do you think the performance will degrade as well? For example, heat dissipation decreasing due to removal of processor from heat conductor or air trigger malfunction after repair work?
@@triple7th89 Hi, the only thing that might degrade is the back cover adhesives and such. If you don't replace the adhesives then water and debris might get in easier than it would if you had not taken it apart. If you use heat and take off the housing pieces carefully and not bend the metal piece, you should be able to put it back together with new adhesive and have it run like it was before. Plus eventually I'm sure there will be housing replacement parts available online as well with pre attached adhesives to be able to easily replace.
i realy want to know how to remove display not should what to do need open up from the back ？or can just take out
You need to disassemble the back to be able to disconnect the screen cable from the main board and attach the new cable back on. Also the screen is held on with adhesive to the midframe which you need to heat up and pry the screen off. But ya you need to disassemble the phone to be able to do this.
PBKreviews thank so much i can fix my dispaly now
@@wakitam8969 Your welcome :)
please i need help with my asus rog 2 when i put the sim i see no service and network not work please need help
It can be many things. A bad sim card, a none active sim card, a bad ESN on the phone, or the phone bands do not support the network you are trying to use it on etc.
nice video but i wanted to see the 3D cooling chamber more explained :(
Thanks, I usually do disassembly videos to show people how to take it apart when they need to do repairs etc. And since the cooling chamber is housed inside of the midframe behind the screen, I would need to break/destroy the midframe to get access to showing the cooling chamber and I wouldn't be able to show clearly how to put the phone back together for those who are just taking it apart to fix something in the phone. But I will keep it in mind for future videos and try to go into the cooling chambers for those of you who are interested :)
@@PBKreviews thank you so much for answering that explain why we couldn't see it, still amazing video bro best wishes for you
No problem, and thank you I appreciate it
why did you use the guitar pick tool to ptry the fingerprint scanner cable?..
Because i didnt want to use anything metal or conductive while the battery was still connected and it was the only plastic tool i had with me at the time that was thin enough to get under it to pop off.
Cool Teardown
Thanks!
Asus rog 2 phone's screen goes black while playing game bt in background game remain open. When phone heat increase its automatically restart and screen goes freeze. Wht is the solution?
Its possible its overheating, you would need to probably take it apart and make sure the thermal paste between the processor and copper has not dried up. If so replace it with new thermal paste. Also make sure there is no water damage, that can cause overheating as well or shorting.
Do we really have to take apart the whole phone just to replace the screen?
You would have to get as far as removing the main board or the battery to be able to slide the screen cable through the mid frame once you disconnect it.
@@PBKreviews Omg. It like to built a new phone...
@@TobiasDettinger lol ya its not a easy task on this phone
@@PBKreviews Yeah. Other phones you just take the screen apart with one connector and peng, the screen is replaced... I tought gaming phones were solid phones but only in specs, not in built quality or drop resistance. I have this phone literaly 5 months now... My old Nexus 6P is still going...
do you have web to buy battery replacement for asus rog ?
How to repair airtriggers?
Hi guys? Which is the best Fone for gaming? BLACK SHARK OR ROG?
Can I only remove the cameras to the phone without problem of running?
You can remove them but anytime you open an application that uses the camera feature etc., then the phone or app will probably freeze or pop up errors.
PBKreviews Thank you so much I really appreciate your time!
@@camilo20141 You're welcome
I love asus
Yup its a great company!
My back logo doesnt work anymore and i cant find that led to buy anywhere
Here is a link to one but its out of stock, you can try contacting them and see when they will restock www.asus-accessories.com/led-ffc-cable-for-rog-phone-88092-72564.htm
@@PBKreviews thank you!
@@cenimaster you're welcome
And here I am again, man you know the name of that white logo paper/plastic ? I ordered that flat cable but not that white "logo".
@@PBKreviews at 5:12 that white logo, you know where to find?
Cool everything i might need but !!!how did you turn it off in the first place D;
not sure what you mean, please clarify :)
@@PBKreviews the screen is off but the phone 🤕 its on and i keep trying to shut it off but it's only rebooting instead! Should i just open the phone? Even if it's on? 😂 will it not be teared apart just like this video meant to be (i thought it was a video how to replace the screen)
I'd appreciate it if u answer tho 🤩 I'll be one of your followers 😁
But can it run crysis?
Can the chassis be replace? In case of accidentally dent?
Yes, if the part becomes available or if you have a replacement, you can always take out the main board and screen and replace the chassis with a new one. :)
Where is signal antenna located..?
The back plastic housing that is screwed down is part of the antenna assembly, those grey lines drawn on them are antenna lines (so if that back housing is not screwed down in place properly, it can cause signal issues). Also the blue coaxial wire cable connects to another antenna assembly which connects to the main board. The main board itself has contact points which also touch points on the frame of the phone which has antenna built into it.
So can i remove the screen without doing all that? Ir do I have to do all that to remove the screen?
Unfortunately you need to do all that so you can disconnect the cable for the screen from the main board and also remove the battery etc. so you can slide out the old screen cable and insert the new screen cable through the midframe and reconnect the cables etc.
@@PBKreviews thanks so much for what you do and the help you provide. Your the only help I've found.
@@dartdroop2082 Anytime, glad I can be of assistance :)
Kids dont do this at home ..♥
Do you know where can I get the screen replacement for asus rog phone? mine is damaged and in need of replacement asap.
Right now your best bet would be to contact asus and see if they have a repair program that you can send in your phone for replacement/repair. I don't think there are any available replacement parts online yet.
@@PBKreviews would u please make screen replacement? How do you open the screen to replace it? Did u use heater gun or hairdryer also?
@@risnandarandhika1293 yes you heat the screen up and pry it off the frame
hi you how to open huawei y9 2019 👍👍👍
wow it's pretty hard to change or repair ROG phone xD .. but have other way to open that back cover from facing any scratching ? sorry for my bad english
Ya its not easy at all. Best way is to apply heat and use flat plastic pry tools or a card thats thick like a credit card or membership card. :)
Do you remember the time when it was easy to change a battery?
yepp, the good ol days!
untung make iphone bisa gampang ganti batre
So the vent on my phone is directly over the processor? Cool
Ya, the copper heatsink/vapor champer runs through the entire back plastic piece in a "L" shape and cools down the important parts of the phone. That vent part can also have the mini fan attachment which comes with the phone attached to it, so it will provide even more cooling
@@PBKreviews it does block one of the two vents on the phone
@@novadestry the fan blocks it?
@@PBKreviews The fan attachment does not line up with the vents and with that has questionable effect on the SoC's temperature and performance, it might have some effect on the battery while the device is being charged and in use, but even that i have some doubts on as the material of the fan assembly is plastic contacting the glass part of the phone. Its still nice for keeping your hands from sweating and making the phone slippery at least?
@@krazykirby1138 They made the fan to cool off the back of the phone only, they say keeping the back cool helps cool down the phone a few degrees but ya I would have rather had the fan cooling the vents like a regular heat sink and fan do on a computer processor but oh well. :)
Omg been waiting for this
heaped cooling system. and a huge gap between the processor and the heat exchanger. This is clearly visible on thermopaste. Continuous marketing. I'd rather take 3 pocophone for the money
Hey, u forgot reconnecting the camera cable...
Ya I know, i mentioned in comment bellow to someone else that after I did video and uploaded I always disassemble the phones again to change adhesive etc so I reattached it afterwards. I couldn't add it to the video since it was already uploaded :)
where can i buy or order an asus_z01qd lcd
Here is a link for one. They have one with frame and one without frame. amzn.to/37Jie2e
made from?
I drop my phone in the water and still not work till now even i put rice .
Rice doesn't really help. You always need to immediately power off the phone when it gets in contact with water (if not waterproof/resistant) and take it apart to dry out any liquid inside so it doesn't short out any parts as well as disconnecting the battery cable. Then use a tooth brush to brush off any corrosion on the chips or connectors and then re assemble to see if it will work. If not, then there is extensive damage to the board or parts and would either require a professional water repair service center or repair shop or a new device.
that guitar pick
И вот это стоит 1000 ЕВРО? Жесть...Чистый маркетинг!
Do you guys repair rog phones?
Hi, no we don't, sorry.
Op
How does this phone costs?
man, the heat sink and the processor (soc) is not pressed together at all!!! the thermal paste is not spread throughout. soc is not usually evenly heated and there is even a possibility that the hot parts of the soc is not even touched by the thermal paste and heat sink.
those really need to be PRESSED together.
Some reviews actually said the cooling system no that good until they put the attachments on the rog
How about Blackshark helo
anyone notice he didn't reconnect the rear camera cable?
yup true, I forgot to reconnect it on video, but took it back apart after the video to add new adhesive and took the board back out and reconnected it. Couldn't add it to the video afterwards when it was uploaded so yep. Nice eye though!
Can I have this pleaseeeee
why didn’t you give me the phone instead xD
:) its currently being used by one of us. It wasn't demolished lol
dam'n Hard!
That's what she said last night ( ͡° ͜ʖ ͡°)
Taiwan NO.1
China NO 2
China NO 2
men tons of adhesive, i am guessing next they will put massive epoxy on phone to have harder opening it or repairing it
Lol ya, i think they put all that to make it dust and water proof
Are you selling the parts? Because I just broke my rog phone :(
Sorry to hear that. The phone was not discarded, it's currently being used so I would not be able to part it.
Ui tui nhìn mà thấy đau j đâu con siêu phẩm 😌
you destroyed the battery
no i didn't. That film tape thats sitting on top of the battery is separate from the battery. We used the phone for a month after we took it apart, worked perfectly fine.
Does it have an IP rating?
They don't specify any ip rating on their site, however asus did reply on Amazon and said its water and dust proof. Them stating water proof and not resistant would mean it would last submerged in water, and also based off all the adhesive/sealing they did inside i would lean toward it being waterproof.
why you did it
you could have gave it to me 😭😭😭😭😭
Lol I did it to show people how to take it apart so if they need to replace parts they can. Sorry :)
Youu crazy phon!
AWSM 👌🏻👌🏻👌🏻
Thanks!
@@PBKreviews ur welcome . 👍🏻👍🏻👍🏻
Seems hard to repair
Yea its more difficult than most phones.
Hlo sir
Buat saya saja gadget ROG ..
gak bisa ngomong bahasa inggris, pula 😥
Plise translate 🙏
Bangke, ngapain lu jir :v
Meu sonho ='(
I want a phone like that but I don't have a money to buy ASUS ROG can you give that to me!?
The phone wasn't destroyed, one of us is using the phone now. :) sorry.
Give away pliiizzz
Why are you doing this?
So people can see how to take it apart to replace parts or repair their phones
@@PBKreviews ok :D
Asus acer msi
TAIWAN
Don't destroy that you give it on me!!!?
It wasn't destroyed. One of us is using the phone now :)
Did u use a hard or medium pick. Also what brand is best.
you can use any pick usually guitar picks work best for me since its thinner. But if you want you can always use a Costco card or something like that if you find it too difficult using a guitar picl, any brand would work.
@@PBKreviews Merci sir
@@manjsher3094 you're very welcome
500$ wasted......................
Join smartpon
How much u buy??
what do you mean? how much was the price of the phone?
Rog phone
I alway want to have my own gaming phone like ROG phone, but you teardown it like nothing
Looks like someone hammered the battery. 😂
So the vapor chamber, it's so tiny compared to razer's.
isn't it supposed to under the battery, which he didn't get to yet?
I didn't show it in the video too well, but at 11:40 you can see a square piece of the vapor chamber where a processor sits against with thermal paste. The vapor chamber goes basically through/under the midframe of the phone. You can see the exact look of it on asus rog site which I will link bellow my comment. So not only does the ROG phone have a vapor chamber, it also has a copper heat spreader on top that sandwiches the main board basically (cooling the board from both sides) and also the carbon cooling pad. On top of that they include a attachment fan to attach to the back which cools off the surface of the back cover to add even more cooling. So I would say the ROG phone has more cooling than the razer overall.
Yes I saw the official images of the vapor cooling chambers, but nothing real yet. And from your video, I still don't see them except for the exposed part of it, which doesn't paint the whole picture right. Whereas Jerry Rig Everything has shown the huge ass chamber on the razor phone 2 so yeah.
@@manarse_678 ya, usually i dont rip apart the phones like he does because i mainly try to show steps on how people can take it apart and put it back together to be able to repair their phones. So ripping stuff apart would not help those who want to see how to reassemble the phones, however ya in this case when someone wants to see the vapor chamber as well, i should have pried off the midplate to show it.
i feel like almost half of this phone is copper, tho. It's interesting that Asus put a lot of effort into cooling on this phone but their laptop cooling solution was not so great
Poorly disassembled ROG phone... RIP.
It's education
hey sir can u just give me the rog phone u just tear down pllsssss i really want it because its still not available in my country plsssss
#loveyouvids
Hi, one of us is currently using the ROG phone sorry. However subscribe and keep your post notifications turned on since we do sometimes have giveaways on some of the products we review or teardown. Currently there are two giveaways in progress you can check our recent videos, one of them is the Moto G7 Power and the other is a Neca Ace Ventura Pet Detective figure.
thanks sir for having time replying my comment its just you guys tear my dream phone and made me feel down but its okay
having inspiration can help you live....
@@MRJOHN-tw9hs No problem, and ya we don't tear the phone down to destroy it, we take it apart to show people how to replace or repair any parts or to see how its constructed etc. Hope you are able to get the ROG phone soon in your area :)
thanks sir!!
Can you do sim+ sd card ?
no it only has 2 sim slots but no sd card reader.
500GB ?
@@radiatewtris yea it comes in 128GB or 512GB
Don't destroy the beauty
Htc
the video is way too long make a bit shorter i had to play 2x speed
When I do faster and shorter videos, people then complain about how its not detailed and they ask a lot of questions on how to do certain steps. One way or another I can't keep everyone happy lol. It's better I do as detailed and clear as possible so people can take it apart and re-assemble it without having problems when they are repairing their phones.
@@PBKreviews learn from jerryrigeverything he has short and detailed videos
@@speednet1719 Well yes we each learn from one another, if you check on my moto z force teardown from back in the day, jerryrigeverything had commented thanking me for showing how one model is done so he could get an idea of how a similar model phone he was trying to take apart would possibly be done. Here is the link for it th-cam.com/video/-7Yi8xWwGm4/w-d-xo.html . At the end of the day each person has their own style and method. I may take a longer approach and let people who aren't as fast with these things keep up, and people like you who want a faster method can watch a faster video. You can't just say oh watch this guy and do it as fast as him because he has yet to do this model phone and I'm sure it would take him quite a bit longer than most phones (maybe not as long as me but still longer than most of his videos as well) since this one had more work to be done. Even if I cut out certain things like screwing in screws etc., would still make it quite long for this specific model phone. Regardless we both have good content to share, and hopefully we are helping people out there whether slow or fast. :)