Easiest Oil Change Ever! | Schwaben Fluid Extractor DIY
ฝัง
- เผยแพร่เมื่อ 14 พ.ย. 2016
- Schwaben Fluid Extractor available here: goo.gl/8DhwbK
Oil Service Kits available here: goo.gl/kYZMkR
B8 A4 Dipsticks: goo.gl/9TuAvQ
Oil changes don't have to be a messy job on the ground under the car. The Schwaben fluid extractor allows an oil change without lifting the car up or removing the drain plug. This is ideal for someone who lives in an apartment complex or needs to change the oil without access to ramps or jacks. - ยานยนต์และพาหนะ
Schwaben Fluid Extractor available here: goo.gl/8DhwbK
Oil Service Kits available here: goo.gl/kYZMkR
ECS Tuning will it work on domestic??
Where did you get the dipstick?
It's our dipstick. Here's a link: goo.gl/9TuAvQ
I've been doing this for years !! Best investment EVER
Will the tube fit in the oil dipstick of a bmw 645ci?
Accidentally found a young Zach from Donut, very cool.
This guy is good. He should be part of a car TH-cam channel
Donut media
Whoosh@@Mullerman
I've read the comments and here's my experience. Bought a schwaben oil extractor in 2005 for my 2000 Audi A4 Quattro, because I moved into an apartment. Did regular 5000 mile oil changes and filter changes at 10k (bought 10 mann oil filters since they don't sell them locally). It's 2019 and I still have the Audi and it doesn't hardly use any oil between oil changes. In Germany, they change the oil through the dipstick for all vehicles when you get your car serviced (well, those cars that still have dipsticks).
Only problems that I've had was one oxygen snsor fail in 2005 (replaced both), MAF failed in 2006, one ignition coil went bad in 2010 (changed all of them) and I just changed the intercooler houses in 2019. Runs great.
I'd been meaning to replace it, starting in 2010, but I don't like any of the new cars and I save heaps of money every year (no car payment). I'm waiting for it to die but it won't.
Just beautiful femiarias.... this is my goal as well. I want to perform the maintenance on my GTI the correct way... and save money too!
love this story, hope you're still with the og car
@@tubbycustard8866 It's 23 years old and still runs great.
I like how quick this video is. Thank you for not making it a 10 min video.
becouse they cut out the most important part - extracting the oil
@@las3k91 extracting takes 5~8 minutes for 6L of oil, i do that on my car.
@@las3k91 but i noticed just now, the container in video, should be almost full, i have a very similar container, it can take max 6L of oil.....and it will be almost completely full, that in video is half full, he did not extract all the oil.
anyone else noticed that he got two different shoes ?
late night
Lol, i think its a boot for a broken foot or something
chicki1ching wtf your right
Let’s count the ways, could it be Driving preference, Broken foot, Too many drinks, he’s Autistic, a Philanthropist or maybe he’s a Republican.
Your right
To all those talking about debris in the oil left behind, as he said, you do this on a warm engine. Debris would be suspended in the liquid, that is if as the name says, OIL FILTER has not caught the particles. Hence he says change the oil filter too! If still worried, just have a full oil sump drain done during a full service and not an interim. Save you some $$$.
There's no explaining this to idiots. Just let them work twice as hard for nothing
When did he change the oil filter?
@@duypham75 0:54 “we’ve got all our old oil extracted, & we’ve changed our oil filter”.
Changing your oil filter is literally one of the steps to doing an oil change. Why would you unscrew an old filter, suck out the old oil, put new oil in, and then decide to put the old dirty filter back on? 🤣
ive been using the same style extractor for years on maintaining my boats i love how neat they can be i typically keep a clean bucket with me and some paper towels what sold me on the system completely was i was able to do a oil change on a new ski boat that has tan carpeting and not a drop was on my carpet using only a small towel as a drop cloth just in case but no drops went onto the towel as well fyi in general i am a very neat and tidy person perhaps slightly OCD ? whatever ? i like things to be clean my Father and I restored cars as a hobby and at the end of a work day every tool we used was degreased , wiped dry and put away in its appropriate storage spot for the next job i currently own my Dads Sk Wayne sockets and wrenches he bought in 1958 and they all look and work like new tools despite many years of service
How can you trust someone about changing the oil in a car when he can't even put on matching shoes?
Lmaooooo. Yt comments never fails
LOL
Frank Frank lmao
Argument "ad hominem"
😭😭😭😭
its very good idea to change oil between official service oil changes for TFSI engines - will try to do it myslef
Definitely the way to go if the filter is in the right place. Looks like a quality pump.
I use the Mityvac 7201 Fluid Extractor Plus and it works awesome with these top filter engines. In my case, it's an Audi 3.0T. I can literally change the oil in my business suit without getting a drop on me. Messiest part is taking out the used oil filter.
I use similar extractor/pump on A4 B8 3.0TDI. Oil capacity is 7,4 liters. After extraction, if I put 7,4 liters in, I’m exactly on the top mark. So at least on 3.0TDI one can get all the oil out. And for any potential crap in the pan... well, it either stays there or gets caught in the filter. I do trust on it that if you extract hot oil (like you are supposed to do), you also get the most crap out from the pan. And crap shouldn’t even accumulate if you change good quality oils with short enough intervals.
In the beginning he used the red capped tube and when he pulled out the tube it was the black capped tub (its the middle female connector) wonder if the black fits better in VW/Audi dipstick area
HOLY CRAP ITS DONUT MEDIA LEGEND ZACH JOBE
Yeah and leave all the crap at the bottom of the oil pan..
My thoughts exactly.
Same as Valvoline. Never will go to them again after I found put that the only cause for motor deterioration is burnt oil.
Except that the oil bolt sits above the lowest part of the pan, and can never empty all the crap. Makes you wonder why they did that.
Yeah but even taking the oil out traditional way won't get everything out.
You need to properly flush the system
@@evs251 : Exactly, this is why when people pull their pans there's stuff in it as the bolt hole sits above the lowest oil line.
This looks pretty cool for sure: Clean, convenient and fast. I was impressed by how well the presenter was dressed doing an oil change. But I was reading through the comments, and the concerns about residual debris and filter has merit. I use a Fumoto valve and that's easy enough albeit being not as clean.
it does not have merit, the residuals/debris is next to nothing. do you not realize the oil filter is there to prevent that exact issue? plus if you already keep up with oil changes, leaving a couple millimeters of oil will not blow up your engine
Interesting time lapse when hand pumping the oil out of the crankcase. How many strokes, and how much time did it really take?
olso it's very important the way this guy holds the bottle. keep it clean
Oh hey it’s Zach jobe
Just bought one this week about to try it today 🙂
From experience: it's important to have the engine oil very warm but not: (1) really hot because it crinkles up the draw tube so it can't even be effectively pushed deep down into the sump; and then
(2) if the oil is still too hot the tube under the suction really narrows by flattening itself and so can take forever for it draw out the oil.
Also obviously you need to know how much oil is in the sump to confirm from the gauge marks on the white container-piston that you have it all. But at the end of drawing up the oil the tube line shows the oil in it as all bubbly...also it makes a gushing noise too.
I wait a full two hours for the hot car engine to cool down (ie., after a drive in the Audi) and then it draws out the oil nicely.
GREAT info.. I am about to perform this tomorrow on a GTI and there are SO many account telling u to extract the oil when HOT. I will warm the engine thanks to you.
@@bjjbrawler1 - reply back with how you went 🙂 - some people are fanatic about getting every last drop, which perhaps makes sense with extended interval changes, as the old oil is really black and had it. But with the suction pump it's so convenient and straight forward I change the oil quite frequently and the "old" oil is still in good nick, since not instantly contaminating the fresh oil IMO.
If they oil is hot it will break the seals on extractors, then they leak. Just take it down the road and back.
VW / AUDI / SKODA /SEAT sump plugs often strip out the thread in the soft alloy sump, exactly what happened to me. I refitted the sump plug with PTFA tape to secure and now drain my oil this way from the top end of engine. TDi engine is on 180,000 miles and still runs fine.
A question for anyone who has used this pump. Both my cars I do oil changes on hold more oil than this has a capacity for. Can you stop extracting the oil part way through the oil change to either drain some out of the reservoir or pour some into another container? I try to use the drain plug method as often as possible, but this way would be convenient when the weather is cold and it’s tough to pull the plastic covers under the engine. I know a lot of the oil change franchises drain the oil this way but that pulling the plug is the best way.
Be good to see after its been extracted, to remove the sump drain plug and see how much is leftvover
Just got one from you guys, very easy process, pour a half of quart after and pumped as well, it showed just under 6 liters witch is low, maybe there is still some left, but it took 5 and a half liters to fill it back witch is the right amount, so maybe it did, anyway it’s going to save me money from now on, dealer will be around 100 even with coupons
Yes!! More tutorials and DIYs :)
Have done this for +20 years never had any problem. The important thing is to change the oil often not the method.
Thanks for this how to video. Approx how much of the old oil is left after siphoning?
Curious as to why installing the oil filter was skipped since that's a part of "changing the oil". Easiest oil change?
Brilliant thanks for posting I’ve just ordered one of these off eBay. Much better than lying on your back messing on with undertray sump plug etc.
How do u like the product.? Looking into orering one
EastOaklandS65Feen it’s brilliant, so easy. I did an oil change in around 15 mins and no mess
@@Paul-eu9jp fa sho thnx man. Ima buy one too now👌
EastOaklandS65Feen no probs mate 👍
Doesn't the tube melt if it is inserted into the engine when the latter is at a high temperature?
So, are we going to ignore the replacement of the oil filter step? Are they now top-mounted as well?
Tried this product but the dipstick guide tube on my engine is very narrow and only the thinnest tube will fit down to start the extraction. Because its thin, it would not extract properly and it would take hours. I sent it back. If your dipstick guide tube can take the medium or large tube, it might be ok. Gone back to the drain plug method. After draining, i leave the bolt out and pour a small amount of clean oil from the top to flush any remaining sediment at the bottom of the oil pan then install bolt and refill. I know it wont take all of it out but my Dimple magnetic sump plug catches lot of muck too. Great investment.
Fantastic! Why do we get charged so much to have this done? Buying an extractor pump today.
The whole idea of doing an oil change is to get rid of debris that will sit at the bottom of your oil pan. Sucking the oil up is not good.
I want to try this with my Kia Cadenza, but how are you sure you get all of the oil out? I don't think this would be as accurate as just unbolting the drain plug.
Using this tool on a Honda outboard. Does removing the engine oil filler cap actually make it suck out faster?
Sure there's some leftover old oil (100ml) at the bottom of the pan, but that doesn't matter if you change your oil regularly. This method comes in handy for people that have no means to lift their cars and don't want to spend money at a garage..
This is dope trying this
so, which tube do you use, the red or the black? First you inserted the red tube, but when you took it out it was the black tube. I got this unit today and no where on it says which color tube is for what. It says use the correct tube for your need, but it doesn't say which one is used for what?
Wtf!? This is the coolest thing I ever seen
I just picked up one of these Schwaben extractors and its how I will be changing my oil on my Audi's from now on. I used to just pay for oil changes cause I live in a condo community and cant work on cars in the parking lot. This extractor is simple and easy. I go to my local park and change the oil in like 25 min. Couple of things for anyone changing their own oil on their Audi for the first time. I have a 2.0 A4 Avant and the last tech who changed the oil tightened the filter so much the inner part that screws onto the engine came off and then I had to wrestle with getting that off the engine what a PIA. So don't think you have the wrong oil filter because the one off the engine is broken! lolz Get a pair of pliers and slowly loosen it so you can unscrew it with your hands and throw it as hard as you can in to a trash can. The 3.2 engine oil filter has to be torqued down (I forget the spec) the 2.0T engine filter is hand tight then one good turn until its tight with the oil filter tool not superman tight. I would recommend to purchase a dip stick makes this whole process way more accurate with getting the exact amount of oil in the engine, if your one of those OCD owners lol. If you have a 3.2 engine make sure your oil filter is the same size as the one your replacing. I purchased a replacement kit and they gave me the wrong filter it was too short but i didn't notice until I was done and got a low oil pressure warning light when I started engine. Replaced with the correct size filter and no more low oil pressure warning.
Jesus Christ, it sounds like everything that can go wrong went wrong for a simple task like this...
@@drsnowmon yeah it was but now its super ez...
@@crunch3rTH-cam Do you still own that Schwaben extractor? How is it holding up? Any issues with it? I'm looking into doing my own oil change for my GTI as my dealer is incompetent, it takes them 8 hours to do an oil change...
@@drsnowmon Its holding up great, it was one of the best purchase I made as far as car gear goes. I rarely pay for an oil change these days unless im feeling lazy. Its super ez and takes like 30 min or so. if your a DIY person this is a must. Most if not all dealerships use an extractor these days.
@@crunch3rTH-cam I appreciate your reply, helped me decide on getting one myself!
Awesome videos. Subbed :)
I have a 2016 Audi A6, can I use this for that car too? Is there a list of cars that this supports.
much easier with the oil filter on top of the engine. much faster too. I'm planning on getting one of these extractors soon.
I have one of these pumps and tried it on my car since it also has a top mounted oil filter but I noticed it would still leave a little over half a quart of oil in the engine. I don’t use it to change my oil but this pump is perfect for changing transmission fluid!
The secret to extracting all the oil through the dipstick tube is to air seal the connection at the dipstick tube. I made another rubber stopper but you can use duct tape in a pinch. I just did it in a Mercedes E350 and extracted all 6.4 liters of oil through the dipstick tube with the oil filler cap and oil filter open
My 2008 Audi TT has the oil filter housing at the bottom, however, the transmission filter is up top.
How can I remove the plug where the dipstick should be on my b8 a4?
I have the one that uses an air compressor... love it. Having a paper filter motor makes it very easy. But I'll at least change drain washer ever other oil change.....
The top tip you cannot beat the old fashioned way in my book. I know it can be a pain to jack a car up and crack the bolt of the pan but it’s the best way. Get your engine hot and crack the bolt and leave it to drain your engine will last longer doing it right.
Some people live in apartments, they don't let you work on your cars so although it's the best way it's not an option for all
How do u remove a stuck drain bolt
this is ' doing it right' its how millions of oil changes are done. You are not always right.
This is how I started doing the oil change, on my B8.5 allroad. As I'm getting too old to go underneath lol
Can someone who has done this tell me is this supposed to be easy?
I did the exact same thing and I had to pump continously over an hour
Show me the moment you changed the oil filter...?
The same way we do at 3:11 this video: th-cam.com/video/sErylPCTv2U/w-d-xo.htmlm11s
@@ecstuning what about all the cars with filters on the bottom? This product is useless.
We have this but it takes a lot more than 3-4 pumps . We have to keep pumping and my arm gets wore out . How many pumps should it take? I notice a break in your video. Normally takes like 20-30 pumps and continuing pumping thru out the oil change
You lazy moon hahahahahaa
I used to think so too. I had a pela oil extractor and I had to continuously pump the oil out. I ended up buying one from ecs tuning and I didn't pump it more than 10 times. It got everything out very quickly, less than 5 mins I think. I'm starting to believe I had a defective Pela extractor before.
New cars more often do not have dipsticks. How can we do an oil change without crawling under the car?
What about the rubish at the engine bottom?
Looks a lot like a pela 6000 oil extractor, i love this thing. Using it for over 6 years now. I don't understand why you buy 5 x 1L oil bottles, when you buy a can of 20 liters it's a lot cheaper.
I love this tool. I use it for everything EXCEPT oil changes because it leaves too much oil in the sump.
And the sludge in the oil pan... you know, next to the pump pick up tube?
Bought this extractor from ECS after watching this video. Big mistake. The presenter makes it look like an easy, safe operation. If the hose kinks in the oil pan you are screwed. A hot engine makes it more likely. A 20 minute oil change has turned into 2 straight days of trying to remove the hose, and possibly hundreds of $$ in mechanic's bills. Wish I would have done more research.
What car you got? I bought this extractor way before known this video, did few times for my GTI, no issue so far...
EXACT same thing happened to me yesterday. Still trying to figure out how to get the tube out. The hot engine made the tube softer, and when trying to pull it out, it "stretches" the tube. Now it's stuck and grabbing on something, and I'm afraid that it will be broken off in the dipstick tube if I yank on it too hard. I'm trying to research how to remove the dipstick tube.
@Hagbard Celine Thanks. Unfortunately, I removed the dipstick tube, BUT it wasnt enough. I had to drop the oil pan last night (what a pain) The tube was in pretty bad shape, but in tact. It was curled up all the way at the other end of the oil pan. It was NOT coming out withiut dropping that pan. For anyone that uses one of these things- be careful! DO NOT USE ON VERY WARM ENGINE. As a matter of fact, don't use it on any engine that is any warmer than a hotter summer days ambient engine temp. Its not worth it. If you have to do it in the winter, don't do it after you drive. Do it on a cold engine after running the engine for 1 or 2 minutes MAX! Also, when you stick the extraction tube down the dipstick tube, DO NOT push it any firther after the first stop the tube will begin to coil.
I turn my car on for about 3-4min warm engine. Not super boiling...lol...
Works like a charm..
Yeah this is never admitted or discussed so I’ll tell you flat out while this is cool and a mess free process it takes a while. That oil under vacuum isn’t just going to pour out in 90 seconds and boom you’re done. Be ready to sit there for at least 20-30 minutes depending on how warm your oil is.
Also that oil extractor isn’t schwaben it’s ther sticker over the same crap you get on eBay or other suppliers from China they just slap a sticker and say it’s theirs. I use a pela 6000 it comes
With metal enforced tubing.
Nice, he's using Castrol Edge Extended. This is a very good oil that lasts a whopping 15K miles!
Oh, thats really Nice
ive been pumping forever. I hate getting under the car. Im pretty sure a lot of high end dealerships do this. its the best
Hot engine soft plastic tubing won't it melt? great idea if you overfill the engine but I don't mind spending a couple of extra minutes getting under the car on a piece of cardboard it's really not that messy we have the right catch pan. Still as an alternative so all power to you.
Funny I usually jack it up take the plug out and run air through the dipstick hole to blow all the crap out on my 135i. 217k with full bolt on and all I go through is transmissions. Works for me
As that Zach Jobe from @Donut Media?
How can you do that on a Audi A6 C7 that doesn’t have a dip stick
That is genius !!!
what about the oil filter, still need to jack the car and exchange when oil change no?
most modern euro cars, like this A4, have a top mounted filter. if you don't have a top mounted filter, you'll still need to raise the car to access it.
Ive had this idea for years to just use some type of pump and pull it through the oil dipstick tube.
You still need to change the oil filter, so just siphoning the oil out isn't enough, the filter has to be changed also
Did you spill the old oil down the drain ?
How do you clean these afterwards?
why did the red hose connector change to black?
I guess It works great for cars with Oil filter on top of the engine. You can do all the work w/o crawl under the car. However, many cars still have the oil filter underneath the engine. You would have to get down there anyway.
Oil filter and mess from the bottom ?
So it extract the oil filter too? If I still have to Jack the car up and change the filter this doesn't make sense when I could just remove the bolt while I'm at it
depends on the car, audis and vws have the filters up top
It's a giant vampire pump. We use a scaled down version to check the oil in military vehicles. Interesting.
What abt cars tht dnt have a dipstick?
How do you clean the extractor?
this would be great for my wrx as its filter is mounted on top of the engine.
I used this pump and it's so easy to use and take only 5 mins.
Great piece of kit these save crawling under the car annd removing all the guard etc too much hassle dead easy with one of these it extracts every last bit of oil highly recommend it
Would this would with a 2011 camaro?
Any luck for newer cars that dont have dipsticks?
kern417 all new vw and audi still have the dipstick tube, just with a plug in it. if you have a bmw you're out of luck.
Ye i think il stick to the correct method thanks
I’m watching this video saying, this guy looks just like the guy from Donut media with a shorter hair, and it is.
Nice! Gotta get me one of those! Wait...A4 B8 don't have dipsticks though. This would require the mod first.
You don't need to purchase a dipstick since the dipstick hole is there from the factory. However, we do highly recommend our dipstick so you can accurately check your levels the good old fashion way. Here's a link: goo.gl/9TuAvQ
A oil change is easy enough it doesn't take me long. This might be good in the winter when I don't want to roll the jack around on ice and snow.
Crazy cool. Are those headlights aftermarket or is that LCI or something?
The headlights are OEM and came with the car. We have an ECS Tuning gun smoke Lamin-X cover on the drivers side headlight. You can get the headlights here: goo.gl/ZoV6qX and the Lamin-X here: goo.gl/e4cET4
these are the times when i wish i had a TSI engine instead of the FSI BPY. No need to go underneath to replace the oil filter.
What's background melody?
I'm already under the car to replace the filter, taking 20 seconds to do the drain bolt is no biggie. The only benefit is keeping things from spilling.
I am sure the main stealers now do this during a service, then charge for the sump plug.
What about the filter
What about filter?
how would you pump the oil in an e92 it has no dipstick
You're fucked. Audi at least has a tube, even though there's no stick in it. Bmw just got rid of it altogether
It doesn’t have a dipstick because you’re not suppose to change the oil at all. Just keep driving it
BMWs are garbage now.
Any Germany made car has no dip stick well at least not bmw ,Audi,mercedes, Volkswagen etc I don't know about rolls Royce because it was owned by bmw and still might be but I'm not sure if it has a dip stick most likely nope
@@Tec-fv2xb your a nuckle head that's why your cars will never last long " not supposed to change the oil " 🤦 👿
Ohhhhhhhh I want one.
Dude put an oil rag in his sweater pocket...
He's not worried, this cheapest ever form of advertising will pay for a new one ... it^s the ONLY reason for this video. NOT to show you how, but to SELL YOU HOW something.
how long should you warm the engine? like 5 minutes? thank you
17 minutes.
youtube commenter about 5-10 minutes will probably be long enough
@@lucafuoco1179 ... could you be a bit more specific?