Woodturning Scrap Walnut Surprise
ฝัง
- เผยแพร่เมื่อ 1 ก.พ. 2024
- This is my first attempt at turning a true hollow vessel. I used some scrap walnut off cuts from the legs of my end table build. This was great fun and I plan to make more hallow vessel type pieces in the future. I got some new tools I am using in this video, I plan to go over all of these as well as the new finish I am using in a video soon. This may be the last time I use the urethane resin for a while, I want to go back and try the epoxy again now that I have had some experience with the urethane. Hoping to get a solid technique locked down so I can share some useful information. This was the closest I have come to having a mold fail in the pressure pot. I don't think I will try a diameter smaller than 7" with the polycarbonate sheet. All and all I am pretty happy with how this piece turned out. I really liked the black mixed in with the blue resin. I think the proportions are a little off in the finished piece, but I may just be too hard on myself. Will definitely be trying this one again down the road. Thank you very much for watching and I hope you have a great day!
Simple woodturning tools
www.simplewoodturningtools.com?bg_ref=gkr80FMJN5
Simple hollowing system with laser kit
www.simplewoodturningtools.co...
Eye Candy pigments 👁️
bit.ly/48vZNLf
Coupon code:SquareandLevel
#resin #woodturning #woodworking
Music courtesy of epidemic sound - แนวปฏิบัติและการใช้ชีวิต
This is my first attempt at turning a true hollow vessel. I used some scrap walnut off cuts from the legs of my end table build. This was great fun and I plan to make more hallow vessel type pieces in the future. I got some new tools I am using in this video, I plan to go over all of these as well as the new finish I am using in a video soon. This may be the last time I use the urethane resin for a while, I want to go back and try the epoxy again now that I have had some experience with the urethane. Hoping to get a solid technique locked down so I can share some useful information. This was the closest I have come to having a mold fail in the pressure pot. I don't think I will try a diameter smaller than 7" with the polycarbonate sheet. All and all I am pretty happy with how this piece turned out. I really liked the black mixed in with the blue resin. I think the proportions are a little off in the finished piece, but I may just be too hard on myself. Will definitely be trying this one again down the road. Thank you very much for watching and I hope you have a great day!
"Maybe too hard on yourself"????🤔 I think that the colors looked great. And others do too!!!!! 😃
The blue you use compliments the wood, but as a redhead I'm partial to green.
Using a laser pointer is brilliant, never seen that before!
Turned out absolutely beautiful. The colors really compliment the piece.👍👍👍
You are, without a doubt, a true artistic genius.
Great first attempt!! Can’t wait until you’re well seasoned! Absolutely beautiful!!
Oh my goodness, why did I not think about using a laser? Thank you. Loved the turning too, novel and covetable. Got my like anytime!
The way the wood layout gives a beautiful spiral effect. Also, the spacing enhances that as well. Excellent in all ways! Looking forward to seeing future projects.
Very nice. Very good shape. Good proportions. Very good color. Good production. Don't care for the music, but I don't like any music. I like the sound of the tools. I would like some commentary or at least a few captions. What brand of resin and the source? What thickness of the polycarbonate and the source? How long in the pressure pot? Thank you for sharing. Have a great day and stay safe.🙂🙂
You are a talented and handsome gentleman. Blue is my favorite color. That vase is stunning.
I love your creativity. I especially loved the bowl you made in a previous video
That is ABSOLUTELY GORGEOUS
Very nice work. Those colors go great together. Well Done!!
Fascinating. That is a beautiful work of art. It would have been nice to see what the piece looked like at each change of tools.
Simply beautiful!!
Thank you!
Magnificent cent. A lot of work well worth the results.
Beautiful work. May I say also very brave!! Turning this vase without a lathe steady was very courageous 😮
Congratulations Commander! Great work of art!!! 👋👋👋👋👋🇧🇷
Beautiful piece! Well done!!
Absolutely brilliant!
Amazing work
striking piece. thank you.
Wow absolutely beautiful love the colors and the way it turned out. Great job
Thanks so much 😊
Beautiful!! 🎉
Beautiful vessel!! Thanks for sharing 👍🏾
Thanks for watching!👍🏻
Absolutely beautiful turn. It’s obvious you’re very meticulous with the entire process. The blue with that walnut contrasts beautifully. Fantastic work.
Thank you very much!
Absolutely stunning!
Thank you so much!
Beautiful piece
That is absolutely stunning mate. Nice one.👍
Thank you! Cheers!
Excelente trabajo muy bonito 👏👏👏
Nice love the blue with walnut
Great job with the General Lathe!
Outstanding! Beautiful! Will done!!
Thank you kindly!
Very nice. Love the color.
Beautiful work.
Thank you! Cheers!
That's lovely !
Stunning!!!
Dude, you are an Artist. I like your Designs and your Handwerk to get beautiful Forms from 2K mixes. Thanks from Germany.
Thank you very much!
Very nice. Lots of work.
Muy bonito el jarrón, un saludo desde Granada, España
Undeniably excellent execution of a challenging project. But what a consumption of epoxy resin and nearly all to go to waste! 😢 Tempting as colour may be, just use different contrasting wood species. ❤
Beautiful.. !!
Beautiful!!!!❤
That is one of the most beautiful vases I’ve ever seen turned!
Thank you very much! I hope you have a great day!
Love it! Great work
Thank you!
Looks awesome Scott! Love how they spiral out from the base. Your new laser thingy is sick!
Thank you Mr. Bones. The “laser thingy” was a good purchase. Glad I picked it up. Thanks for watching! Your next video almost done? I hope there are more amazing water color plan paintings.
Great job! Maybe I should try.
Beautiful Piece and interesting process. Full view and Like 👍
Thank you so much!
Superb work !!
Thanks a lot!
Artista puro
Nicely done piece. I also have used A. slow cast for a long time. Have always turned urethan and never epoxy. I do get some major chipping with slow cast if to aggressive with my larger diameter carbides! Enjoy your videos, stay safe.
I have a 12 and 20 general lathe, i love mine
Very cool 😎
Another great turn. You need an art exhibit.❤
Thank you Mr Franklin. And as always, thanks for the kind, encouraging comments. Appreciate you always watching my videos.
Wow wow very nice
incredible, magnificent
Thank you!
Oi ficou show meus parabéns
Love it
Beautiful you should be proud
Nice skills
I think it’s great. I saw the thumbnail and had to watch the process. I really like the colors. Now I have to subscribe.
Thank you!
Хорошо, люблю токарные работы.
Thats resin turning😮
👍🏻
Very nice! It would be interesting to see how a piece turns out if you torch the wood before adding epoxy.
Definitely something I will be trying in the future. It’s on my list for future video ideas. I’ve always really liked the way resin looks butted up to charred wood. I’ve made some pieces in the past using electricity to burn the wood and back filled it with resin. It is a very cool look. Thanks for watching! Hope you have a great day!
I'd pay 100's for that piece. cheers
Hi YES I LIKE IT A LOT...ITS A REALLY BEAUTIFUL LOOKING VESSEL.. DAVID N.S.W. AUSTRALIA...
Parabéns meu amigo vc trabalha muito bem serviço de qualidade muito bom meu nome é José Francisco Alves da Silva moro em João pessoa paraíba eu vejo seu trabalho
What is the flexible clear plastic material you use to enclose your epoxy casting?
Beautiful work. What finish do you use?
A very elegant piece with the wood and resin shapes. I can’t wait to hear about your tools. I have a Jet midsize lathe and am wondering if there is a hollowing system I can use for deep pieces like this. I also noticed you using a buffing pad of some kind. That is also something that looks interesting to use for a smooth and perfect finish. I am enjoying your videos and hope you add some narration or subtitles down the road. Thank you
Thank you very much! I do plan on adding some narration In the near future. Possibly the next video. I struggle with it a fair amount and it makes the videos take significantly longer to make. We will see. I am also considering making a second channel. One for no talking and I’ll use this channel for talking. Still trying to figure this all out. Thanks for watching. Hope you have a great day!
What and where do you get the plastic you use to wrap around the project?
My heart skipped a beat at 12:27
That is the best combination of wood and resin turned into a vase that I've seen.
Still a bit confused about the original "off cuts". The dimensions seemed to be pretty accurate or is that just me?
Anyway, congratulations. This was brilliant.
Thanks for watching. The off cuts were from a previous video of building two end tables. I did cut the pointy ends off so they would fit in the pressure pot, but I just got lucky the angles worked out. Thanks for watching and leaving a comment. I hope you have a great day!
Scott
Looks really nice, and yes, you are to hard on yourself.
WOW!😃
Beautiful piece. Was that a laser pointer guiding you on the wall thickness? I've never seen that before, Ingenius. I love the whole blue/black streaks/walnut blend...it really works well together.
Thank you very much. The laser pointer is part of the simple hollower kit. There should be a link in the description to their website as well as that specific tool. Thank for watching. I hope you have a great day!
Very nice piece. I have used slow cast for a long time. Curious as to how you will compare it to epoxy for turning? Stay safe.
Thanks, will do!
Very nice artisan-ship, .... it's interesting that although "oil" is now a dirty word, that polyester resin is so popular, I guess most greenies don't even realise thier phones are made from fossil fuels.
Anybody find a good source for thin polycarbonate?
Great entertainment thanks
Glad you enjoyed it. Thanks for watching!
Another amazing piece! You sure got lucky when the secondary glue failed on your mold!! I notice the pieces of wood you used all had the same “twist” to them. Was that from the design of the table legs you got the cut offs from? Did you polish the inside? Or what did you do there? Your precision is inspiring and clearly a sign of the exacting craftsman you must be with “flat work.”
Those scrap pieces were exactly how they came off the end tables I made. Wasn’t really a twist to them, those were just the angles I made the table legs at. Definitely glad I didn’t fill my pressure pot with resin. That would have been a unfortunate mistake. Thanks for watching! I hope you have a great day!
What angles were the table legs cut at?
Great video-This gives me some ideas for table legs with walnut blades and epoxy. My coffee table legs are usually 17 inches starting out. What is the max height of that pressure pot? Thanks love the blues!
This pot has a max height of 12 inches. I ended up choosing this one because of its height too. It was pretty much the biggest one I could find before the price increased significantly ( think I paid $70 for it). Good luck with the table legs. Hope you have a great day!!
This is stunning! Incredibly beautiful! That blue is mesmerizing! Do you sell your work?
Thank you so much. I’m sorry, but I do not sell any pieces at this time. Hope you have a great day!
May God give you patience to do more of these! 😁👍👍
More to come!
🇧🇷🇧🇷🇧🇷 tamo junto gostei top demais 😃
If it doesn't bother you, use the advice
Place a “container” in the tank in which you will lower the product. The additional capacity will protect your main tank if the filling compound leaks.
Otherwise, what leaks out will remain in the tank forever, and this is sad
❤❤❤❤
Wooooow
Wow!!!! May I ask how much the resin for this project cost? I am new and interested in resin turning, but a hobbyist turner.
I’m sorry I’m not sure of the dollar amount of resin in each piece. I buy the resin in larger quantities so it is a bit cheaper. 3 gallons of resin will usually make 3-4 pieces depending on the size.
Красиво! Профиль!
first stage of gluing - just use thin CA glue on prepared "composition". Much more precise and easy
👍🏻
Nice. Please lathe guys stop the turning regularly so we can see how it develops. I zoom by a lot of the endless turning to the stopped moments
Some of us want to watch his tool technique while turning
Just suggesting stopping the spinning regularly to give us a look.
The machine hum almost gave me a heart attack. My stove just caught on fire and then I heard the hum and thought it was the refrigerator. I honestly had no clue there was a difference between urethane resin and epoxy.
👏🏻👏🏻👏🏻👏🏻👏🏻
you can easily remove the silicone if you sprey alcohol on it
👍👍👍
You got lucky that the form held. Next time wrap a with tape to prevent failure.
👍🏻
Magnifique pièce c’est presque dommage de salir un si beau mec et un si bel atelier avec les copeaux 😅
Isn't it more epoxy than wood?
👍🏻
how much would you sell these for
I currently do not sell any of the pieces I make. This one was given to my daughter and is being displayed on her bookshelf. Thanks for watching, I hope you have a great day!
Beautiful! Would love to know more about your finishing process, the shine you achieved was beautiful. Can you share?
Yes, soon.