- 21
- 3 295 201
Square and Level
United States
เข้าร่วมเมื่อ 29 ม.ค. 2021
Turning wood to shavings and constantly cleaning my shop. Making unique pieces from scrap wood and resin is what I like best. If you enjoy the process of blank preparation and turning this is the place for you, thanks for visiting!
@superclearepoxypartner
DISCLAIMER :
Woodturning and woodworking can be dangerous, When using any tools/machinery always read & understand the manufacturer's guidelines & safety instructions.
The methods I use may not be the safest, so please be responsible for your own safety ... My videos are for entertainment purposes only.
@superclearepoxypartner
DISCLAIMER :
Woodturning and woodworking can be dangerous, When using any tools/machinery always read & understand the manufacturer's guidelines & safety instructions.
The methods I use may not be the safest, so please be responsible for your own safety ... My videos are for entertainment purposes only.
Woodturning a Fantastic Bowl From a Flat Board
This is my first attempt at woodturning a bowl from a board. The inspiration for this piece was from a video by thepapa1947. For a full instructional video on this process, please watch his video. Link below to his video and channel. I tried to stick to his instructions for my first attempt and feel I was fairly successful. I used Walnut, quilted Maple, and Padauk in this piece. I’m not sure I like the idea of using Padauk next to maple as it really hinders the finishing options due to the Padauk bleeding into the Maple. I used a gloss clear lacquer on this piece to limit the color bleed. This was a fun a simple piece to make that required a few special setups. I really enjoyed making this project and now that I feel confident in the technique, I will likely adapt it to try some different designs in the future. I had some successes and failures in this video. I tried and failed to keep the first ring from bouncing around on the lathe when cut. It was a bit of a rushed idea and I’ll come up with something better next time. I also definitely need to get a smaller parting tool. The one I used is a 3/16”x1/2” wide and burned the wood a little when cutting. I tried to modify it after cutting the outer ring and it seemed to work better but I think a smaller cutting tip would be ideal. Maybe a 1/8 inch tool would work better. Thank you to my friend Matt for welding me up that stainless steel tool rest for making the angled cuts. It might not be a pretty weld but it did exactly what I needed it to do. Thanks for watching, I hope you have a great day!
Thank you to @thepapa1947 for all the inspirational and instructional videos. His
Chaos bowl instructional video can be found here.
th-cam.com/video/YYUa9w59BzY/w-d-xo.htmlsi=bnrmIrOZ7R8NjTmn
And his channel
youtube.com/@ThePapa1947?si=HdDUTMWCKQAGpYqn
#woodturning #woodworking
#diy
Affiliate links
Simple woodturning tools
www.simplewoodturningtools.com?bg_ref=gkr80FMJN5
Acrylic resin simple start turner and hollower
www.simplewoodturningtools.com/knyydq
Acrylic resin simple start roughing tool
www.simplewoodturningtools.com/yio14f
Simple hollowing system with laser kit
www.simplewoodturningtools.com/ect9iij
Music courtesy of epidemic sound
Thank you to @thepapa1947 for all the inspirational and instructional videos. His
Chaos bowl instructional video can be found here.
th-cam.com/video/YYUa9w59BzY/w-d-xo.htmlsi=bnrmIrOZ7R8NjTmn
And his channel
youtube.com/@ThePapa1947?si=HdDUTMWCKQAGpYqn
#woodturning #woodworking
#diy
Affiliate links
Simple woodturning tools
www.simplewoodturningtools.com?bg_ref=gkr80FMJN5
Acrylic resin simple start turner and hollower
www.simplewoodturningtools.com/knyydq
Acrylic resin simple start roughing tool
www.simplewoodturningtools.com/yio14f
Simple hollowing system with laser kit
www.simplewoodturningtools.com/ect9iij
Music courtesy of epidemic sound
มุมมอง: 41 350
วีดีโอ
Stunning Root Ball Turning Transformation
มุมมอง 190Kหลายเดือนก่อน
I was given this Almond tree root ball from a member of my local woodturning club. This is my first attempt at turning a root ball. I was definitely a little nervous about this one, it was the largest and most unbalanced piece I have turned to date. Originally I had planned to not use any resin in this piece, but unfortunately there was no way I was going to be able to hallow it out and have it...
Woodturning Unique Walnut Log
มุมมอง 28Kหลายเดือนก่อน
I am turning this vessel from a walnut crotch log I won in a raffle at my local woodturners club meeting. I had some indecision about what resin project to do next, I just couldn’t pick one from the list. So I decided to take a break and make something out of just wood for a change. Definitely a fun, quick piece and I got some practice in with my all my tools. Even got to try out my new lathe s...
Woodturning Intricate Hexagon Pattern Creation
มุมมอง 105K2 หลายเดือนก่อน
In this video I make a piece without the use of a pressure pot and explain why I prefer to use one. Luckily the piece came out pretty good, but I will not be trying this again. I feel a pressure pot is a requirement if turning with resin. Thank you very much to Simple Woodturning Tools for providing the scraper and rougher used in this video. They worked fantastic and I’m sure to get a lot of u...
Simple Hybrid Woodturning Project
มุมมอง 23K3 หลายเดือนก่อน
Today I am making a simple elegant box from spalted walnut. I will be testing out some new carbide tools, a new epoxy resin, and a new finish. This was the perfect piece to test out some new techniques on. It was a fun small piece that I will keep in my shop to store my wedding ring, while I am "turning" wood into sawdust. Thank you very much to Mr. Tomasic for letting me borrow his design in t...
Woodturning Scrap Walnut Surprise
มุมมอง 301K3 หลายเดือนก่อน
This is my first attempt at turning a true hollow vessel. I used some scrap walnut off cuts from the legs of my end table build. This was great fun and I plan to make more hallow vessel type pieces in the future. I got some new tools I am using in this video, I plan to go over all of these as well as the new finish I am using in a video soon. This may be the last time I use the urethane resin f...
Woodturning Lovely Maple Resin Bowl
มุมมอง 500K4 หลายเดือนก่อน
I had this scrap maple left over from an old project. I milled it into 1/4” planks and spaced it with 3/16” paint stir sticks. The mold is made from 1/32” polycarbonate sheet. I am using urethane resin for the pour, not epoxy resin. I almost ran out of time for the pour. This resin only has a 12 minute working time once mixed to get it into the pressure pot, but is cured in 4 hours which is ama...
Woodturning Hot Pepper Wood Bowl
มุมมอง 22K4 หลายเดือนก่อน
I found some pepper tree logs on the side of the road on the way to work. They had been sitting for some time and were quite dry. After looking at the unique wood I decided to try a fire theme resin pour to go with the pepper wood. I wanted to try something new that I read in a book about hybrid woodturning. I used urethane resin instead of epoxy. Supposedly it would turn easier and polish bett...
Woodturning Beautiful Walnut Resin Bowl
มุมมอง 2M5 หลายเดือนก่อน
So I thought I would give this Woodturning with epoxy resin a try. I am having an absolute blast on this old wood lathe I picked up. Woodturning is definitely a skill that I am lacking in proficiency and really look forward to learning new teqniques and tackling new projects. This Walnut and resin bowl "turned" out amazing and I for sure have plenty of ideas for future projects. #woodworking #w...
Helical Cutter Head Installation and Review 8 inch Jointer
มุมมอง 4.8K6 หลายเดือนก่อน
Helical cutter head upgrade for a 8” jointer. Step by step installation of cutter head. Review and first impressions of new helical cutter. ELEPHAS - 8" Woodworking Tool Spiral Cutter head and Helical cutterhead for jointer, 4 rows 28 inserts a.co/d/2X3juzd www.homedepot.com/p/Husky-Faucet-Handle-and-Sleeve-Puller-410-072-0111/311493722? Time stamps 00:00-00:54 overview 00:54-01:54 unboxing and...
Walnut logs to treasure chest
มุมมอง 1.9K7 หลายเดือนก่อน
In this fun woodworking project, I show how I built a decorative pirate treasure chest to hand out candy to all the trick or treaters this year. This is a very simple project, perfect for a wood worker of any skill level. This chest could also easily be used as a decorative storage box in your home. #woodworking #diy #treasurechest Time stamps 00:00-00:41 needed materials 00:42-02:07 making the...
Saw blades are expensive! Protect your investment!
มุมมอง 8K7 หลายเดือนก่อน
I built a saw blade storage box out of scrap plywood to prtoect my new dado blades. The saw blades came in a cardboard box and that just wont work for me. Simple project took only an afternoon to build and sholud last a lifetime. Speacial thanks to my son for writing, creating, recording, and editing both songs used in this video. You are an amazing musician! It has been such a gift to watch yo...
From Trash to Treasure: Building a Reclaimed Wood Craft Show Display
มุมมอง 2.1K8 หลายเดือนก่อน
I built a craft show display shelf using reclaimed wood from a friends grandfathers old walnut orchard. The display shelf is quick and easy to assemble, breaks down into small, easy to transport size pieces, and requires no tools or hardware to assemble. Using reclaimed wood can be a excellent option for many projects, but comes with intersting hurdles due to cracks, rot, and bug eaten spots in...
Harvey table saw 2 month review
มุมมอง 25K8 หลายเดือนก่อน
In this video I will review my experience with my new Harvey table saw after 2 months of use. Model Alpha HW110TC-52P. I will go over its included accessories, its different functions, my likes , disappointments, and my experience with Harvey customer service. My goal with this video is to provide helpful information to anyone in the market for new table saw, so they may make a better decision ...
Router table build part 2. Mobile table with dust collection and storage to improve organization
มุมมอง 15K8 หลายเดือนก่อน
Part 2 of my mobile router table build. In this video I will build the fence system, install the dust collection and all the drawaers. The table will feature a Jessem Rout-R-Lift ll, it will fit under the right extension wing of my table saw, have plenty of storage space, an adjustable fence with dust collection, and have a built in cross cut sled. This will be a great addition to my shop and w...
Router table part 1. Mobile table with dust collection and storage to improve organization
มุมมอง 44K8 หลายเดือนก่อน
Router table part 1. Mobile table with dust collection and storage to improve organization
Dust collection system for small wood shop DIY.
มุมมอง 1.6K9 หลายเดือนก่อน
Dust collection system for small wood shop DIY.
Miter saw dust collection with unique multi tool use
มุมมอง 7K10 หลายเดือนก่อน
Miter saw dust collection with unique multi tool use
Out feed table part 2 with storage to improve organization.
มุมมอง 27K10 หลายเดือนก่อน
Out feed table part 2 with storage to improve organization.
Oh my goodness, why did I not think about using a laser? Thank you. Loved the turning too, novel and covetable. Got my like anytime!
👍👏
That has become a beautiful bowl, and you have started with elaborated glue up, from which you have turned the rings. I saw that you use a special tool rest to make the correct angle for the rings. Did you make it yourself?
Thanks! I did make the tool rest. Well…. My neighbor welded it for me. It actually worked perfectly for my needs.
Congratulations Commander! Great work of art!!! 👋👋👋👋👋🇧🇷
Beautiful!! 🎉
Honest question because I am always learning (or trying to). I noticed you pulled the vacuum and then waited three days until you returned the atmosphere. I assume this gave the resin time to harden under vacuum. Would it not be better to pull the vacuum, and then rerun it to normal pressure before it hardens, so that the bubbles formed by the vacuum would then be compressed by the pressure of the atmosphere you are working in? Again, these are real questions, I am not an expert. Thank you!
It was actually not put under vacuum. That was pressure. It helps squeeze out any air bubbles while the resin cures.
Incredible. I have two questions if I may. When you were piecing it together, did you sand the cuts that you made with the bandsaw? Also, what angle did you use with that jig that you made?
I did not sand any of the pieces before the glue up and I set the tool rest at 45 degrees for first ring. Then 50 and 55 degrees for remaining rings to try to obtain more of a curve to the bowl. Thanks for watching. I hope you have a great day! Scott
Great work! What is that tool at 10:23? Never seen one like it before.
That was my simple woodturning tools simple scraper with a negative rake carbide insert. It really works great. There is an affiliate link in the description for their website and that tool specifically if you would like to check them out. Thanks for watching. I hope you have a great day! Scott
Fascinating. That is a beautiful work of art. It would have been nice to see what the piece looked like at each change of tools.
Muy bonito el jarrón, un saludo desde Granada, España
absolutely beautiful.....brilliant.....I love it. ❤
Love it
That is beautiful, and love the music.
I had no idea Jim Carey did woodturning.
Lmao
Всё прекрасно, но музыка...))
Beautiful.. !!
👏👏👏👏👏
When you put that liquid with the wood in the bucket, why do you have to put the lot into that vacuum drum, why can't it just be left to quare? (you can see that I am not a wood turner).
It’s actually pressure not vacuum. It helps to reduce air bubbles in the piece. Thanks for watching, hope you have a great day! Scott
Using a laser pointer is brilliant, never seen that before!
how much would you sell these for
I currently do not sell any of the pieces I make. This one was given to my daughter and is being displayed on her bookshelf. Thanks for watching, I hope you have a great day!
A delightful outcome!
Absolutely, a total pleasure to watch. Thank you.
WOW!😃
As a hobbyist, I must say that the two things I feel when watching your vid's are admiration and envy, for your workshop, tools and skill. I do however have a technical question. Is the resin you use elastic or do you rely on the strength of the resin to resist future stress, created by movement in the wood? Or. Has that root ball been seasoning since "Adam were a lad"? I only ask because I don't have the time left to wait that long. 😉👍
The epoxy resin is not elastic. This specific piece has moved a little since being made and I will likely fix it in the future once it has stabilized. This was my first attempt at a root turning and I learned a lot. Next time I will turn it to rough oversized shape. Drill the pilot hole in the center and let it air out for a few weeks before adding resin or finishing the turn if no resin will be used. A microwave oven is also a good option I may experiment with in the future, when I get around to picking up a used one. Thanks for watching and the great question. I hope you have a great day! Scott
@@squareandlevel Thanks for the reply. I too warm up my work in a microwave, immediately prior to applying beeswax polish. It drives out the air and moisture from the wood and as it cools the wax is sucked deep into the pores. A word of warning though. Don't apply any sort of finish before you put your work in the oven.
The only thing I dislike about turning, is the amount of waste involved in nearly every project. Even when you glue up offcuts, you still end up with like 60% of what you started with, going into the dust collector. This has to be one of THE most efficient uses of wood ive ever seen on a lathe, and the results are gorgeous! I think I need to get me one of those tool rests you're using to hold your parting tool. Could you tell me what I need to search for to find one, please? Thanks.
Unfortunately I cannot help you with the tool rest. I had that piece of 1” stainless bar stock laying in the scrap metal bucket for years now. My neighbor was kind enough to cut it and weld it for me. Then I just cut a groove in it with an angle grinder the same thickness as my parting tool. It’s far from a “precision” built tool, but did exactly what I needed it to do. I believe the video I linked in the description has step by step instructions of how he made his. I went a different route but basically accomplished the same thing. Sorry I couldn’t be of more help. Thanks for watching, hope you have a great day! Scott
Undeniably excellent execution of a challenging project. But what a consumption of epoxy resin and nearly all to go to waste! 😢 Tempting as colour may be, just use different contrasting wood species. ❤
Very nice artisan-ship, .... it's interesting that although "oil" is now a dirty word, that polyester resin is so popular, I guess most greenies don't even realise thier phones are made from fossil fuels.
Don’t care for the bowl. Really like the lathe
You are, without a doubt, a true artistic genius.
That was worth every minute of watching. Beautiful walnut resin bowl. Thanks for the video!
Awesome, thank you! Hope you have a great day! Scott
May God give you patience to do more of these! 😁👍👍
More to come!
Stunning, absolutely stunning.
Thank you so much! Hope you have a great day! Scott
Какой молодец, молча, не тараторя всякие глупости на каком-то нелепом диалекте, но под классную музыку, сотворил такую красоту.
What is the black liquid that was used to fill the cracks in the timber?
Black CA glue. If I were to make this piece again, I would have filled the holes and cracks with coffee grounds and then backfilled that with the CA glue. I think it would have turned out nicer and used less glue. Thanks for watching and leaving a comment. I hope you have a great day! Scott
Simply beautiful!!
Thank you!
Интересная техника! Обязательно сделаю подобное. Удачи в работе и спасибо за видео!
My heart skipped a beat at 12:27
Absolutely wonderful keep it up.
Изготовить из глины , покрыть глазурью, нанести такой же рисунок , обжечь. Будет экологичней!
It’s a shame you don’t get to see the beautiful colors in your amazing creations.
It would be a shame if I couldn’t see at all. I have never known anything different, so I don’t feel like I’m missing out. Thanks for watching. I hope you have a great day!
Für mich schöne Dinge haben meist überzeugendes Verhältnis vom Nutzen zum Aufwand. Hier: umgekehrt. Riesiger Berg (Sonder-)Müll, Vase besser nicht verwenden!
You my brother are a craftsman.. beautiful work sir
Thank you kindly
My friend Kristen's son calls charcuterie shark cootie! 😂
Beautiful piece. Was that a laser pointer guiding you on the wall thickness? I've never seen that before, Ingenius. I love the whole blue/black streaks/walnut blend...it really works well together.
Thank you very much. The laser pointer is part of the simple hollower kit. There should be a link in the description to their website as well as that specific tool. Thank for watching. I hope you have a great day!
I have a 12 and 20 general lathe, i love mine
Bravo, a true piece of art and masterclass craftmanship.
Thank you very much. Hope you have a great day!
Very nice
You lost me at 25 seconds into video. I understood the first caliper measurement , but not the second one and you did not explain it. I stopped watching then.
👍🏻
OLD Leather Smith here, Nice job, we R are R worse enemies. I always C things differently than my clients, if it's really bad I make another one. I have had clients stay what was wrong with the first one? I just tell them I didn't like it. We all learn by our mistakes. GOD'S BLESSINGS ✝️🥎🙃
Nice work brother., if I can make a suggestion,, please play some different music. Or no music at all. After watching you make this piece I think IM gonna try copying it.. ill use different colors
👍🏻