I tried the extreme body wash and wax from your older video worked pretty well and made the red paint pop. Might have to try the snow foam when I run out!
Nice! I really like the extreme body wash. This was my first try with the Honeydew Snow Foam. I'm going to be upgrading/modifying my foam cannon on the recommendation of someone from here. I may share that in a new video and try the snow foam again.
From what I’ve researched with snow foam it’s to remove the fine crud by applying and rinsing it off, so the dirt is washed off first before you take a mitt or sponge to it to avoid swirling or scratches
I have seen it used as a touch free wash but it never quite does a great job. If I sprayed foam and then rinsed it off, I would lay down more foam before taking a mitt to it. The foam does start to breakdown the dirt, but mostly it lubricates the surface and encapsulates the dirt to safely move it away.
I use a dilution ratio of 8:1 and it comes out super thick! I'm using a sunjoe foam cannon with a 1.1mm orifice and a Ryobi 1800psi with 1.2gpm. I swear that stuff clings at that ratio. I'm not a professional so I'm not too worried about cost per ounce since I buy the gallon off of Amazon and it last me for a few months however I do take washing my car serious so it's kind of a mix of not to worried about soap cost but I'm not trying to waste product.
If you change out the orifice on the foam canon to a 1.1 mm it will make the foam come out thicker especially if you have a electric pressure washer because of the gpm so if you change out the orifice it could be thicker foam
I used the CG honeydew car wash in my slick foam cannon and it works great MR Pink works way better but for $20 for 64 oz that a great price for a great product
Well there are many variables at play here. There are other much more expensive cannons that can produce better foam. The dilution ratio. And water hardness. People that have soft water will get much better results no matter what.
Well , I have the 1.1 mm orifice and a black Chevy Blazer and I can tell you for certain that this product leaves spots ! Oh well. However it is still a good video but too hard to tell on a white car.
Change your FC to MJJC Pro with 1.1 orifice then pressure washer hose to Flexzila 50ft everything with quick connectors and a better more pro washer gun with swivel then you will see the real pro sticky heavy foam with any shampoo but most with Adams MF🤩
Your water to soap ratio is not dialed in correctly. That stuff should look like shaving cream. Try playing with the knobs and you will get a better foam out of the gun.
Thanks for the feedback/advice. I’m tweaking all kinds of things. I actually think I have really hard water. It’s difficult to get things to foam up in general. I actually experimented with different kinds of water in the cannon. I found some interesting things like adding sodium carbonate to soften the water. I’m trying to dial that in now.
@The American abroad I have a brand new 1.1 orifice already installed. Any other ideas about getting thicker foam? What is your mix of water to soap? In my foam cannon I do 900ml water and 100ml soap. like I said, I have very hard water at my house.
Oh wow, thats twice the ratio of soap to water that I use. I'll start playing with using a higher soap to water ratio. It's crazy because my 1:10 ratio is almost twice what the product recommends (assuming you're completely filling the foam cannon). If all else fails, I'm looking at a filter.
Hello, the new MJJC Snow Foam Shampoo 600ML have released,may I know if you like to review it? If yes,would you pls tell me the email? Thanks in advance!
The knob is actually adjusted for maximum foam. I have tried this product with a higher soap to water ratio and I get a lot more foam. Makes sense. But I try to do all these reviews with the same baseline dilution.
![[ENGSUB] UNPRODUCTIVE DAY ใช้ชีวิต (เปื่อยๆ) ด้วยกัน 1 วัน! | OUROAD CLOSEFRiEND SS2 EP.9](http://i.ytimg.com/vi/pyYKZ3kra9w/mqdefault.jpg)
![[TH] 2024 PMGC League | กลุ่มสีเหลืองวันที่ 1 | PUBG MOBILE Global Championship](http://i.ytimg.com/vi/I_FdxGT3WV4/mqdefault.jpg)
I tried the extreme body wash and wax from your older video worked pretty well and made the red paint pop. Might have to try the snow foam when I run out!
Nice! I really like the extreme body wash. This was my first try with the Honeydew Snow Foam. I'm going to be upgrading/modifying my foam cannon on the recommendation of someone from here. I may share that in a new video and try the snow foam again.
From what I’ve researched with snow foam it’s to remove the fine crud by applying and rinsing it off, so the dirt is washed off first before you take a mitt or sponge to it to avoid swirling or scratches
I have seen it used as a touch free wash but it never quite does a great job. If I sprayed foam and then rinsed it off, I would lay down more foam before taking a mitt to it. The foam does start to breakdown the dirt, but mostly it lubricates the surface and encapsulates the dirt to safely move it away.
i love how you test your wax cause thats exactly how I determine if my car is ready for a strip and rewax
I use a dilution ratio of 8:1 and it comes out super thick! I'm using a sunjoe foam cannon with a 1.1mm orifice and a Ryobi 1800psi with 1.2gpm. I swear that stuff clings at that ratio.
I'm not a professional so I'm not too worried about cost per ounce since I buy the gallon off of Amazon and it last me for a few months however I do take washing my car serious so it's kind of a mix of not to worried about soap cost but I'm not trying to waste product.
I hear ya Nicolas. I’m thinking the same way. I’m slowly bumping up my soap in the ratio to find the right mix for my water. Houston water sucks.
If you change out the orifice on the foam canon to a 1.1 mm it will make the foam come out thicker especially if you have a electric pressure washer because of the gpm so if you change out the orifice it could be thicker foam
Oh nvm you already changed out the orifice in a later video my bad
Lol. No worries. That’s just extra confirmation that the upgrade was worth it.
How many oz of soap you put 3-4 oz and I think for foaming the preassure washer has something to do with it aswell
Have you tried renegade products money shot?
I was surprised to see only 134 subs. This is exceptional content and the channel will surely blow up.
Thanks. I’ll be putting more attention to the channel. It was a rough summer here in Houston.
really need to do this comparison on a black or dark color vehicle
I totally agree. Time to start borrowing friends and neighbors cars, lol.
Best part of this snow foam besides providing a good prewash or quick wash is the smell.
I still can’t replicate it for a pool side drink. Lol
I used the CG honeydew car wash in my slick foam cannon and it works great MR Pink works way better but for $20 for 64 oz that a great price for a great product
That is a great price. I’m running low on some soaps and trying to decide which one to get and review.
Can this soap be used without the foam cannon?
Yes, all of the chemical guys soaps can be used in a bucket alone. I just prefer using the foam cannon.
Are you running a 1.1 mm orfice in your cannon or 1.25mm big difference
At the time I shot this it was a 1.25. Shortly after I went to a 1.1. It was a big difference
@@freshsquiized I bet only .006 between them one is .043 and .049 unreal brother 👏 🙌
With the cannon that I use I get way more suds than that something. You're doing is not right looks good though.
Well there are many variables at play here. There are other much more expensive cannons that can produce better foam. The dilution ratio. And water hardness. People that have soft water will get much better results no matter what.
Well , I have the 1.1 mm orifice and a black Chevy Blazer and I can tell you for certain that this product leaves spots ! Oh well. However it is still a good video but too hard to tell on a white car.
Change your FC to MJJC Pro with 1.1 orifice then pressure washer hose to Flexzila 50ft everything with quick connectors and a better more pro washer gun with swivel then you will see the real pro sticky heavy foam with any shampoo but most with Adams MF🤩
I definitely need to try more soaps.
Was that a sponge you used to wash?
Sadly, yes. I don’t use it anymore.
Great video but tough to tell with white
Your water to soap ratio is not dialed in correctly. That stuff should look like shaving cream. Try playing with the knobs and you will get a better foam out of the gun.
Thanks for the feedback/advice. I’m tweaking all kinds of things. I actually think I have really hard water. It’s difficult to get things to foam up in general. I actually experimented with different kinds of water in the cannon. I found some interesting things like adding sodium carbonate to soften the water. I’m trying to dial that in now.
@@freshsquiized try looking up the 1.1 MM orifice for your foam cannon. It will shoot out shaving cream. swear to god.
@The American abroad I have a brand new 1.1 orifice already installed. Any other ideas about getting thicker foam? What is your mix of water to soap? In my foam cannon I do 900ml water and 100ml soap. like I said, I have very hard water at my house.
@@freshsquiized maybe try an in-line filter. I do 2 oz of soap to five ounces of water. And then I just dial in the top lever for water to soap ratio.
Oh wow, thats twice the ratio of soap to water that I use. I'll start playing with using a higher soap to water ratio. It's crazy because my 1:10 ratio is almost twice what the product recommends (assuming you're completely filling the foam cannon). If all else fails, I'm looking at a filter.
Hello, the new MJJC Snow Foam Shampoo 600ML have released,may I know if you like to review it? If yes,would you pls tell me the email? Thanks in advance!
Yes, I would love to check out the new foam cannon and review it. I will contact you directly. Thank you!
Ok,looking forward to it @@freshsquiized
Dear,waiting for you@@freshsquiized 😊
Bro do not diluted, adjust the knob and it will make it tick.
The knob is actually adjusted for maximum foam. I have tried this product with a higher soap to water ratio and I get a lot more foam. Makes sense. But I try to do all these reviews with the same baseline dilution.
I thought this was a tasty review
Note: it does not taste as good as it smells.