*Wow. Someone who got it right.* Linear passes. No pressure washing. Though to dry I use a nozzle that can mist water. The smaller the droplets the faster the scratch-less drying. (But it's cool. You're trying to sell that Afterwash spray.)
the black plastic nut where the main body of the blaster connects to the gun that connects to the garden hose loosened the first time I used it. Had to retighten before every use.
I am a car enthusiast who is always at a car show as I am the Co-Founder of a car club here in Atlanta GA and I only use Chemical Guys products for all my car detailing needs. With that said I will say that I was disappointed with this product as it did not produce the suds action that I was hoping for. However, I did purchase the Chemical Guys Big Mouth foam canon and I will say that is the best foam canon I have ever used as I am extremely happy and satisfied with the foam results I get from the Big Mouth Foam Canon.
Very informative video, thank you. Here in the UK, we use an old-fashioned mangle to dry off the wash mitt after rinsing. Just push your hand into it and use the handle to squeeze out every last drop. You can ignore any red stains, that just means it's working. Enjoy.
After you foam the car, do you rinse it off before washing with the mit? It appears it was not rinsed before, but I have seen others rinse before washing with the mit. Which is best?
Hey! You can do either or, they are both great methods. If the vehicle is super dirty, we recommend foaming, rinsing, and then foaming again. Thanks for watching and happy detailing!
Was there water in the foam blaster container when he opened it up to put the three ounces of the citrus wash? Are we supposed to put water in there too and if so how much before stirring?
Hey! Add two or three ounces of your favorite car wash soap to the foam gun and then fill the rest of the canister with clean water. A pro tip is to use warm water which improves foaming action.
I thought the point of foam is to stay on the car for a few minutes to soften all the grime but thI s looked like it fell off as it was being applied. Is that the fault of the applicator or would a better snow foam be thick enough to cling to the car?
Good video, but one question. I ordered a foam blaster 6 some time ago and the hose nozzle . Never has worked correctly. Most recently I ordered the Torq snow foam blaster R1. Used it today Saturday September 9th. It works correctly. Also ordered the chemical guys pressure washer. Is there any way to get another blaster 6 hose nozzle. I have been using chemical guys for about 2 years now.
Hey there! You're going to love it. Yes, check out our website and your local Detail Garage to grab your favorite detailing products. www.chemicalguys.com/home
Hey Fernando! You'll love the Woolly Mammoth Drying Towel. www.chemicalguys.com/woolly-mammoth-microfibers-drying-towel/MIC1995.html?gtmListValue=Internal%20Search
I just recently purchased a hellcat and got the windows tinted it's been only a week , how long would you wait to wash the car so that this soap dosen't hurt the tint or is the soap tint friendly
@@ChemicalGuys thank you , I was endlessly trying to connect it to my pressure washer , do you have any for pressure washer in specific I like the thick foam?
Hey! No, the TORQ Foam Blaster 6 is only for standard garden hoses. If you would like to use a TORQ unit with a pressure washer, we recommend the TORQ Proffesional Max Foam 8. www.chemicalguys.com/torq-professional-foam-cannon-max-foam-8/EQP_310.html
Hi there! Yes, add two or three ounces of your favorite car wash shampoo and fill the rest of the canister with clean water . A pro tip is to use warm water which improves foaming action.
Hey! We recommend washing it with Tough Mudder, it is the ultimate off-road vehicle wash that safely removes stuck-on dirt and sand while leaving behind a layer of sealant that makes it harder for fresh mud to stick to the surface! www.chemicalguys.com/tough-mudder-off-road-truck-and-atv-heavy-duty-wash-shampoo/tough-mudder-offroad-wash.html
Hey! We recommend adding 1-2 ounces of soap and try using warm water in your foam blaster. Also, turn the dial to adjust your suds. Thanks for watching and thanks for being part of the Chemical Guys family!
Are you washing the car in direct sunlight or a hot climate? Or are the engine and bonnet hot when you wash? It shouldn't dry that quickly if you're washing a cold car in the shade. If it continues, do one section at a time.
Hey! Check out the link down below to check out the Foam Blaster 6. Thanks for watching and happy detailing! www.chemicalguys.com/torq-foam-blaster-6/ACC_326.html
Hey Gregory! Choose a pressure washer that fits your preference and budget. We recommend using a unit that is capable of between 1600 - 3500 PSI for automotive detailing.
Hey Chemical Guys! If I’m claying my vehicle and I run out of clay lubber (aka Amazon is late on my delivery) can I use detail spray in a pinch just to safely finish the vehicle?
Hey! Yes, you may use a quick detailer such as Synthetic Quick Detailer. Why? Synthetic Quick Detailer is wax-free and will not cause drag when claying. Thanks for watching and thanks for being part of the Chemical Guys family!
YES, foam it up! I can watch him rub down my car any day. Jk, just wanted to give feedback the way some guys do when watching one of the ladies do a demo video. Honestly though, very informative. Can't wait to start using your products
Got a ‘17 corolla with lots of swirls and when you look at the paint in the sun it looks like UV waves going across the paint. Any ideal soap recommendations to prevent that? Definitely looking at getting that foam blaster. (Barcelona red metallic paint)
Hey! Use a thick foaming soap such as Sticky Snowball Snow Foam to prevent the installation of swirls and scratches. www.chemicalguys.com/sticky-snowball-ultra-snow-foam/sticky-snowball-ultra-snow-foam.html?gtmListValue=Internal%20Search
So, if I want to use clean slate to remove old wax, and my car is not as dirty as the one shown in this video, should I still first wash with a normal soap then clean slate, or can I go straight with clean slate then continue with claying, hydro slick, butter wet wax, etc...
We recommend going straight with Clean Slate. Henry used Citrus Wash & Gloss because the vehicle was super dirty and he wanted high lubrication to remove all the grime. Thanks for watching and thanks for being part of the Chemical Guys family!
Loved my Foam Blaster. The first 4 or 5 times I used it along with a 2 bucket method and a proper drying towel the results were just as good as a wash, claybar, polish and wax. One time the foam gum disconnected from the hose gun. Be careful that the connection is tight before pressing trigger. On my 6th time using it the empty foam gun fell from 2 feet high onto a flower bed next to the driveway. I was shocked that the black plastic nozzle snapped just an inch from where it snaps into the lid of the foam gun. Why can’t a person just buy one part of the foam gun. Now it’s either $67 Cdn dollars down the toilet or another $67 for another Foam gun and just pray that the nozzle doesn’t break off so easily.
I bought one last weekend and used it on 2 vehicles the next day. Poor eyesight meant that looking at the box in the store I assumed the picture of what's included showed a small packet of soap ( it was the instructions ). There was no Foam Gun soap at the store and I hadn't watched this video yet ( they had the Citrus but I didn't know it would work at the time ). Small town with very limited auto cleaning supply so I went up the line the next day and bought a competitor's foam soap. It worked well and did a good job. The results were noticeably better than just a rinse, 2 bucket wash and a dry although the cars always looked good before. I guess the foam enhances the existing polish, wax and hybrid ceramic sealant? One problem was that the bottle on the foam blaster should be about 25-40% bigger as it was empty before the mid sized SUV was completely covered so I had to mix another batch and I wasn't moving slowly. The instructions aren't clear on what the different numbers on the dial do. Is 0 setting reducing the amount of water or the amount of soap over the number 5? A guy on another video suggested that 0 allowed more foam versus water?
Hey! In this video we demonstrating using After Wash with the Woolly Mammoth. We want to show the viewer different techniques to dry their vehicle. I will be sure to pass this onto the video guys and have them make a drying video with a blower. Thanks for watching!
Is there a difference in the cleaning and protecting of my car between this product and your Maxi-Suds II Foaming Car Wash Soap? Thanks for your help. Love your videos!
Hey! Both are great options, use Citrus Wash and Gloss to lift stubborn filth. Use Maxi Suds for routine washing. I recommend using HydroSuds to enhance existing coatings and protectants.
So the Citrus Wash and Gloss isn't meant for cars with a ceramic coating? My car has the nano coating done by the dealership. Could I still use Citrus wash, but just an ounce?
Will the Honey Dew Snow Foam remove wax and sealants? I have a bottle for my motorcycle but haven't used it yet, if it does I have the Redline Hyper seal.
Hey! The Foam Blaster 6 attaches to any standard garden hose without the need for a pressure washer. www.chemicalguys.com/torq-foam-blaster-6/ACC_326.html
Hi there! Check out the Woolly Mammoth Drying Towel. www.chemicalguys.com/woolly-mammoth-microfibers-drying-towel/MIC1995.html?gtmListValue=Internal%20Search
Hey! Yes, however to maintain your ceramic coating we recommend using HydroSuds. www.chemicalguys.com/hydrosuds-high-gloss-hyper-foaming-sio2-ceramic-car-wash-soap-16-oz/CWS21216.html?gtmListValue=Internal%20Search
Hello, wondering if can I wash my car with the vitalize shampoo wash on a lime green paint without a coating ? And if I get it waxed can I still use this wash as a normal wash?
I would appreciate if the video or even the instructions in the box mentioned what setting between 0 and 5 to us and what happens when you choose 0 over 5. Hard to see much difference on either end of the dial.
Foam Wash without Pressure Washer!
- TORQ Foam Blaster 6:
bit.ly/3WKmua4
- Citrus Wash and Gloss:
bit.ly/3qnGmnG
- Cyclone Dirt Trap:
bit.ly/3WJIW37
- Woolly Mammoth Drying Towel:
bit.ly/45DTrJu
*Wow. Someone who got it right.* Linear passes. No pressure washing. Though to dry I use a nozzle that can mist water. The smaller the droplets the faster the scratch-less drying. (But it's cool. You're trying to sell that Afterwash spray.)
The foam blaster 6 is legit. Certainly not the crazy-thick foam like with a canon, but it really does work!
Thanks for the amazing feedback!
Mine leaks at connection. Been to Escomdido store twice about it. Went to foam cannon.
the black plastic nut where the main body of the blaster connects to the gun that connects to the garden hose loosened the first time I used it. Had to retighten before every use.
I am a car enthusiast who is always at a car show as I am the Co-Founder of a car club here in Atlanta GA and I only use Chemical Guys products for all my car detailing needs. With that said I will say that I was disappointed with this product as it did not produce the suds action that I was hoping for. However, I did purchase the Chemical Guys Big Mouth foam canon and I will say that is the best foam canon I have ever used as I am extremely happy and satisfied with the foam results I get from the Big Mouth Foam Canon.
Very informative video, thank you. Here in the UK, we use an old-fashioned mangle to dry off the wash mitt after rinsing. Just push your hand into it and use the handle to squeeze out every last drop. You can ignore any red stains, that just means it's working. Enjoy.
Hey Steve, thanks for tuning in!
@@ChemicalGuys did you use pressure washer or water hose?
@@aliquran7535 did you even watch the first minute? They explain it around :40
Just got my torq 6 foam cannon on Saturday its supposed to rain all week where I'm at so I'm still waiting to use it.
Awesome, be sure to take pictures and tag us!
Him and Nick are my favorites.
Thanks so much for the awesome feedback!!
They are the only two I will watch
Nick is dead
Grammatical nightmare
Just ordered my first CG kit for my new toyota tundra. Cant wait to try it out. Thanks for the video.
Enjoy your detailing products!
I friggen love this channel! These videos never get old! Lol
Hey! Thanks for watching and thanks for being part of the Chemical Guys family!
car wash videos are my favorite! lol
Thanks so much for tuning in!!
After you foam the car, do you rinse it off before washing with the mit? It appears it was not rinsed before, but I have seen others rinse before washing with the mit. Which is best?
Hey! You can do either or, they are both great methods. If the vehicle is super dirty, we recommend foaming, rinsing, and then foaming again. Thanks for watching and happy detailing!
Never forget the two bucket method system set-up!
Happy detailing!!
Was there water in the foam blaster container when he opened it up to put the three ounces of the citrus wash? Are we supposed to put water in there too and if so how much before stirring?
Hey! Add two or three ounces of your favorite car wash soap to the foam gun and then fill the rest of the canister with clean water. A pro tip is to use warm water which improves foaming action.
I thought the point of foam is to stay on the car for a few minutes to soften all the grime but thI s looked like it fell off as it was being applied.
Is that the fault of the applicator or would a better snow foam be thick enough to cling to the car?
Total BS marketing. Thin foam and, as you point out, it dissipated immediately
Just purchased this...works awesome...keep up the good work guys
Glad you enjoy it!
Thank you guy. Luke from italy
Hey Luke, greetings from Southern California!
Nice and simple explanation. Thank you.
Glad it was helpful!
Good video, but one question. I ordered a foam blaster 6 some time ago and the hose nozzle . Never has worked correctly. Most recently I ordered the Torq snow foam blaster R1. Used it today Saturday September 9th. It works correctly. Also ordered the chemical guys pressure washer. Is there any way to get another blaster 6 hose nozzle. I have been using chemical guys for about 2 years now.
Great job man! Keep up the good work. 👌🏼👍🏼
Thanks! Will do!
Thanks for the amazing feedback!
Hows the foam wirh foam blaster 6 using CG hydro Suds? Is 6 for as in foam settings?
Good video and product is great . Love the after wash 😉
Glad you enjoyed the video!
I'm definitely getting this a few weeks after I get my supra 😆 you guys have detail brushes too?
Hey there! You're going to love it. Yes, check out our website and your local Detail Garage to grab your favorite detailing products.
www.chemicalguys.com/home
@@ChemicalGuys thank you very much!
Is that a supraaa
Ayyy mk3 or mk4?
Does this come with the hose attachment sprayer?
That's right! The Foam Blaster 6 attaches directly to most standard garden hoses and is ready to foam.
What would you suggest for a van with a satin black matte vinyl wrap. Soap and also which foam blaster would you suggest ?
Hey! Check out Meticulous Matte Auto Wash to safely clean your stain finish. You can use any foam cannon or foam gun to lather the surface with foam.
Very interested in that wholly mammoth towel
Hey Fernando! You'll love the Woolly Mammoth Drying Towel.
www.chemicalguys.com/woolly-mammoth-microfibers-drying-towel/MIC1995.html?gtmListValue=Internal%20Search
I just recently purchased a hellcat and got the windows tinted it's been only a week , how long would you wait to wash the car so that this soap dosen't hurt the tint or is the soap tint friendly
Hi there! Check with the tint installer for best recommendations.
Does this foam cannon also work for the pressure washer , or only the garden hose?
Hi there! The Foam Blaster 6 is only intended for use with a garden hose.
@@ChemicalGuys thank you , I was endlessly trying to connect it to my pressure washer , do you have any for pressure washer in specific I like the thick foam?
what is the best way to clean the big towel after using it????
Hi Vincent! Check out Microfiber Wash to maintain all microfiber goods.
th-cam.com/video/jFVDI3VwMy4/w-d-xo.html
Where can I buy your product in Saudi Arabia? I checked your site you dont ship here
Hello! Please search your local listings to locate an authorized distributor in your region.
Well the ceramic wash produce good suds? It’s the purple stuff!
HydroSuds creates tons of thick foam!
www.chemicalguys.com/hydrosuds-high-gloss-hyper-foaming-sio2-ceramic-car-wash-soap/CWS21216.html?gtmListValue=Internal%20Search
Can you still use the pressure washer with that??
Hey! No, the TORQ Foam Blaster 6 is only for standard garden hoses. If you would like to use a TORQ unit with a pressure washer, we recommend the TORQ Proffesional Max Foam 8.
www.chemicalguys.com/torq-professional-foam-cannon-max-foam-8/EQP_310.html
Does this foam blaster still work with a pressure washer though?? Like any pressure washer??
Hey Noah! The Foam Blaster 6 is intended for use with a garden hose only, no need for a pressure washer.
@@ChemicalGuys Thank you for the quick response! Which one is best for use with a pressure washer?
Did you u add water to the foam canon ?
Hi there! Yes, add two or three ounces of your favorite car wash shampoo and fill the rest of the canister with clean water . A pro tip is to use warm water which improves foaming action.
can you get away with just foaming the car without using the mit or is that mainly with pressure washers?
Hey! A touchless wash can be performed on a vehicle with only light dust. Using a wash mitt may be necessary for stubborn filth.
Can this be used with a pressure washer?
Hey! The Foam Blaster 6 is intended to only be used with a garden hose. Use a foam cannon with your pressure washer.
You wash the mammoth towel after every use?
Hi Danny! Depending on how frequently the Woolly Mammoth is used it may need to be washed after every use.
So can I use this with a pressure washer? Or is it just for a garden hose
Hey! The Foam Blaster 6 is only intended for use with a garden hose.
@@ChemicalGuys okay thanks do you recommend one for a pressure washer
Hello I just purchased a new four wheeler. Is there any Chemical Guys products that I can use as a protectant so it's easy to clean?
Hey! We recommend washing it with Tough Mudder, it is the ultimate off-road vehicle wash that safely removes stuck-on dirt and sand while leaving behind a layer of sealant that makes it harder for fresh mud to stick to the surface!
www.chemicalguys.com/tough-mudder-off-road-truck-and-atv-heavy-duty-wash-shampoo/tough-mudder-offroad-wash.html
@@ChemicalGuys thanks for the quick reply I will be ordering that today.
Nice
Happy detailing!!
Does this cannon work with both hose and pressure washer?
Hey! The TORQ Foam Blaster 6 is intended to be used with a garden hose only.
Guy knows his stuff great video
Thanks for the amazing feedback!
Good job homie
Happy detailing!
Mine doesn't even foam up as much like in this video. I need tips ASAP
Hey! We recommend adding 1-2 ounces of soap and try using warm water in your foam blaster. Also, turn the dial to adjust your suds. Thanks for watching and thanks for being part of the Chemical Guys family!
Chemical Guys what number would you suggest setting the dial to for the thickest suds ?
I just bought one does not foam much.
perfect my friend
Happy detailing!!
Everytime i use the foam gun by the time i finish the hood the rest is dried any suggestions on how to do it?
Are you washing the car in direct sunlight or a hot climate? Or are the engine and bonnet hot when you wash? It shouldn't dry that quickly if you're washing a cold car in the shade. If it continues, do one section at a time.
Use distilled water. It will dry but it won't leave waterspots
Hey! We recommend washing the vehicle in a shaded area or when the vehicle is cool to the touch. Thanks for watching and happy detailing!
Bought the set for my motorcycle lol
Enjoy your detailing products!!
What hose are you using
Hey! Check out the link down below to check out the Foam Blaster 6. Thanks for watching and happy detailing!
www.chemicalguys.com/torq-foam-blaster-6/ACC_326.html
Nice, first comment.
Happy detailing!
Which of your guys car shampoos are PH balanced?
Hey! All the soaps are pH-balanced except Clean Slate and Citrus Wash & Gloss. Thanks for watching and happy detailing!
Not really foam though..More like suds.
Thanks so much for tuning in!
@@ChemicalGuys np yur videos are great.. i now know the difference of snow foam :)
Car getting a soft massage? Dont see any pressure while scrubbing….
Mine literally is shooting out water no soap.
Yes I put some in
Hey! Try using two or three ounces of your favorite car wash soap.
Do you have any recommendations for electric pressure washers that will work with your foamer attachment?
Hey Gregory! Choose a pressure washer that fits your preference and budget. We recommend using a unit that is capable of between 1600 - 3500 PSI for automotive detailing.
PSI over 2,000 can damage your paint idk what they are talking about cheers
Any other suggested soap to use for a foam gun or just normal foamy soap
Hey! Use your favorite Chemical Guys car wash soap in your foam gun, foam cannon or traditional wash bucket.
My Foam blaster 6 is awesome. Canadian Tire had your stuff on sale a couple weeks ago, and I picked up a bunch of stuff! Very happy with it!
Thanks for the amazing feedback, we are glad to have you part of the Chemical Guys family!
Which setting did you use? As I just purchased one
@@michaelgeorge1712 hey! I use it wide open! It puts a generous amount amount of foam out!
@@AlexDoltz ok, thanks for the tip...
Hey Chemical Guys! If I’m claying my vehicle and I run out of clay lubber (aka Amazon is late on my delivery) can I use detail spray in a pinch just to safely finish the vehicle?
i would only use clay luber....detail spray isnt meant for lubricating surfaces and may cause issues
Hey! Yes, you may use a quick detailer such as Synthetic Quick Detailer. Why? Synthetic Quick Detailer is wax-free and will not cause drag when claying. Thanks for watching and thanks for being part of the Chemical Guys family!
Get your girl to leave a snail trail across the hood! BEST LUB EVER to clay your car.
Why not try a spray bottle with a " dollop" of this Citrus Wash? Seems like it works well as a lubricant.
YES, foam it up! I can watch him rub down my car any day. Jk, just wanted to give feedback the way some guys do when watching one of the ladies do a demo video. Honestly though, very informative. Can't wait to start using your products
Happy detailing!
Got a ‘17 corolla with lots of swirls and when you look at the paint in the sun it looks like UV waves going across the paint.
Any ideal soap recommendations to prevent that? Definitely looking at getting that foam blaster.
(Barcelona red metallic paint)
Hey! Use a thick foaming soap such as Sticky Snowball Snow Foam to prevent the installation of swirls and scratches.
www.chemicalguys.com/sticky-snowball-ultra-snow-foam/sticky-snowball-ultra-snow-foam.html?gtmListValue=Internal%20Search
So, if I want to use clean slate to remove old wax, and my car is not as dirty as the one shown in this video, should I still first wash with a normal soap then clean slate, or can I go straight with clean slate then continue with claying, hydro slick, butter wet wax, etc...
We recommend going straight with Clean Slate. Henry used Citrus Wash & Gloss because the vehicle was super dirty and he wanted high lubrication to remove all the grime. Thanks for watching and thanks for being part of the Chemical Guys family!
Loved my Foam Blaster. The first 4 or 5 times I used it along with a 2 bucket method and a proper drying towel the results were just as good as a wash, claybar, polish and wax. One time the foam gum disconnected from the hose gun. Be careful that the connection is tight before pressing trigger. On my 6th time using it the empty foam gun fell from 2 feet high onto a flower bed next to the driveway. I was shocked that the black plastic nozzle snapped just an inch from where it snaps into the lid of the foam gun. Why can’t a person just buy one part of the foam gun. Now it’s either $67 Cdn dollars down the toilet or another $67 for another Foam gun and just pray that the nozzle doesn’t break off so easily.
I bought one last weekend and used it on 2 vehicles the next day. Poor eyesight meant that looking at the box in the store I assumed the picture of what's included showed a small packet of soap ( it was the instructions ). There was no Foam Gun soap at the store and I hadn't watched this video yet ( they had the Citrus but I didn't know it would work at the time ). Small town with very limited auto cleaning supply so I went up the line the next day and bought a competitor's foam soap. It worked well and did a good job. The results were noticeably better than just a rinse, 2 bucket wash and a dry although the cars always looked good before. I guess the foam enhances the existing polish, wax and hybrid ceramic sealant? One problem was that the bottle on the foam blaster should be about 25-40% bigger as it was empty before the mid sized SUV was completely covered so I had to mix another batch and I wasn't moving slowly. The instructions aren't clear on what the different numbers on the dial do. Is 0 setting reducing the amount of water or the amount of soap over the number 5? A guy on another video suggested that 0 allowed more foam versus water?
Loooove the soap and gun but, is the After Wash really necessary if you towel dry the car quick enough?
I love using After Wash to make add extra lubrication as well as helping preventing water spots!
You guys rock!
Thanks so much for being part of the Chemical Guys family!!
Thanks for watching and thanks for the amazing feedback!
I need to clean up my 2006 Acura TSX 😫 should I give it a good wash using Citrus soap for a first time only and then clay bar the following week?
No need to wait for the following week, clay right after the wash
mvega i would love to clay bar it but I don’t have a polisher at home
Hey! We recommend washing it with Citrus Wash & Gloss to remove everything from the vehicle. Thanks for watching and happy detailing!
Chemical Guys your welcome, is Clay bar necessary after a wash? What if the paint isn’t completely dull.
Excellent tips! Why do you not use your blower for drying and then ZERO scratching!
Hey! In this video we demonstrating using After Wash with the Woolly Mammoth. We want to show the viewer different techniques to dry their vehicle. I will be sure to pass this onto the video guys and have them make a drying video with a blower. Thanks for watching!
@@ChemicalGuys Love your great ideas and products too!!
First time buyer for the foam cannon. So I fill up with soap till the soap line. And fill it to the top with water?
Hey! That's correct, add two or three ounces of soap and then fill the rest of the canister with warm water.
Where are you located
Hey! Use the Store Locator to find the closest Detail Garage.
www.chemicalguys.com/storelocator
Is there a difference in the cleaning and protecting of my car between this product and your Maxi-Suds II Foaming Car Wash Soap? Thanks for your help. Love your videos!
Hey! Both are great options, use Citrus Wash and Gloss to lift stubborn filth. Use Maxi Suds for routine washing. I recommend using HydroSuds to enhance existing coatings and protectants.
So the Citrus Wash and Gloss isn't meant for cars with a ceramic coating? My car has the nano coating done by the dealership. Could I still use Citrus wash, but just an ounce?
Hey! For best results, use HydroSuds to maintain your coating.
Will the Honey Dew Snow Foam remove wax and sealants? I have a bottle for my motorcycle but haven't used it yet, if it does I have the Redline Hyper seal.
Hey! Honeydew Snow Foam is gentle on coatings and will not degrade or remove them.
I love you shampoo part of this small bubble gum I love you shampoo and wax have that little country 202 Jeep
Happy detailing!
Can I foam using only garden hose???
Or do I need a power washer???
Hey! The Foam Blaster 6 attaches to any standard garden hose without the need for a pressure washer.
www.chemicalguys.com/torq-foam-blaster-6/ACC_326.html
@@ChemicalGuys thankyou
I'm gonna try it
I need a foam cannon to use it or I can use the container on the pressure washer
Hey! Using a foam cannon or foam gun with Citrus Wash and Gloss will achieve the best foam.
Thank you nice video
What is the name of the clothe uou are using to dry
Hi there! Check out the Woolly Mammoth Drying Towel.
www.chemicalguys.com/woolly-mammoth-microfibers-drying-towel/MIC1995.html?gtmListValue=Internal%20Search
Is this ph balanced for ceramic coating?
This soap is safe for protective coatings in concentrations of 3 oz or less.
Is that soap safe for cars that is ceramic coated ?
Hey! Yes, however to maintain your ceramic coating we recommend using HydroSuds.
www.chemicalguys.com/hydrosuds-high-gloss-hyper-foaming-sio2-ceramic-car-wash-soap-16-oz/CWS21216.html?gtmListValue=Internal%20Search
Do you have to use a garden hose with this foam gun or could you use a pressure washer.
Hey! The Foam Blaster 6 can only be used with a garden hose.
You Guys know so much 👍
Happy detailing!
can i use this foam blaster with pressure washers?
Hey! The Foam Blaster 6 is only intended to be used with a garden hose, using it with a pressure washer may damage the foam gun.
@@ChemicalGuys thanks for the quick reply👍🏽
Does this work with pressure washers as well?
Hi Anthony! The TORQ Foam Blaster 6 is intended to be used with a garden hose only.
@@ChemicalGuys does it provide a thick foam if desired?
Got one today for a Christmas gift along with decon spray and Honeydew soap. Can't wait to use it!
Awesome, be sure to take pictures and tag us!
Know I understand about getting your shoes wet😁.
Thanks for watching and happy detailing!
Great job on washing the vehicle.
Thanks for watching and happy detailing!
Hello, wondering if can I wash my car with the vitalize shampoo wash on a lime green paint without a coating ? And if I get it waxed can I still use this wash as a normal wash?
Hey! Yes, you may wash your vehicle that is not ceramic coated with Vitalize. Thanks for watching and happy detailing!
Chemical Guys thank you!! Great channel with awesome advice !!!
tryin to call get hung up on
Hey Tim, please send us a message on Facebook or Instagram.
Very nice video, I now feel more confident with tackling this job with these products.
You can do it!
I would appreciate if the video or even the instructions in the box mentioned what setting between 0 and 5 to us and what happens when you choose 0 over 5. Hard to see much difference on either end of the dial.
Do we really need these cannons or blasters? i doubt it, leisurely wash the car on a Sunday is very refreshing.
Solid content man that’s why I buy the products cause y’all branded the company so well
Glad to have you as part of the Chemical Guys family!!