The less the car vibrates, and the less noise it makes, the more comfy you are and the longer you keep the car. This is what I've always said to everyone who mods cars.
You’re such a cool guy to watch. I can’t do projects myself but I feel like I did them through you. Paradox and CK Wraps are my fave wrappers. Can’t wait for your wrapping vids.
Progress better than no progress!! apart from the silly mistakes the fender looks sweet...when it comes to the tight corners get your self some plastic/silicon cooking spatulas etc they are great for pushing into the tight corners (you can probs get proper 'car wrap' pusher things on temu now for chump change, tho that stuff used to cost) also that stuff will stretch like crazy so for strange tight corners just keep practising stretching and 'shrinking' ...All the best from the UK...;D
I'm hoping that if you decide to wrap the entire car, that you haven't done so yet. If you plan to wrap the entire car, I highly suggest you get a couple friends to help you. I bought some Vivid wrap for my Eg. I wasted an entire 60' roll just on the rear quarter because of glue lines. No matter how much I prepped it, no matter how lightly I set the wrap. Whenever I went to start with my line and work from there, there were glue lines. If I had 2 more people to hold the wrap away from the car to get it in place after I pulled the backing paper off, I feel like it would have prevented the glue lines.
@@robindabank3737 Everything Works Except The Speedometer. All The Fuses Are Good Also And It Looks Like Someone Put A New Connector On The Speed Sensor At Sometime.
100% Ok to do so. You wouldn't want to check oil or fluid levels with the front of the vehicle on ramps. Reason being the car wouldn't be leveled and you wouldn't get an accurate reading. But if you empty the oil pan and you know how many quarts your car takes then there you go.
Not a problem but I prefer jacking the car up and two jackstands and using a tire to put under the car lot of work but it’s not to bad as long as it’s safe
I'm from south Africa... George Garden Route... how do I personally get in touch with you... been following you for a couple of years now... Holla at me G'! Power of Dreams#
The less the car vibrates, and the less noise it makes, the more comfy you are and the longer you keep the car. This is what I've always said to everyone who mods cars.
You’re such a cool guy to watch. I can’t do projects myself but I feel like I did them through you. Paradox and CK Wraps are my fave wrappers. Can’t wait for your wrapping vids.
You know you’re gna get sht done when the usher is playin in the background 😂
👍👍👍👍👍Learn new stuff everyday stay open minded that's what a old man told me your never ever going to stop learning. 💪💪💪
Great work can’t wait to do it on my channel looks good
This was my first car. I had a 1990 red manual sedan
Great job on that first wrap far better than my first go. To remove it easier if you have a steamer it makes it so much easier 💪👌 great video buddy
Mistakes happen, he just needs more practice right.
Sheesh I haven’t been here in a min and still love every bit
killing the game truly an inspiration i just started my turbo lsv swap on my 92 civic coup your content is a big help much love brother
Progress better than no progress!! apart from the silly mistakes the fender looks sweet...when it comes to the tight corners get your self some plastic/silicon cooking spatulas etc they are great for pushing into the tight corners (you can probs get proper 'car wrap' pusher things on temu now for chump change, tho that stuff used to cost) also that stuff will stretch like crazy so for strange tight corners just keep practising stretching and 'shrinking' ...All the best from the UK...;D
I'm hoping that if you decide to wrap the entire car, that you haven't done so yet.
If you plan to wrap the entire car, I highly suggest you get a couple friends to help you. I bought some Vivid wrap for my Eg. I wasted an entire 60' roll just on the rear quarter because of glue lines. No matter how much I prepped it, no matter how lightly I set the wrap. Whenever I went to start with my line and work from there, there were glue lines.
If I had 2 more people to hold the wrap away from the car to get it in place after I pulled the backing paper off, I feel like it would have prevented the glue lines.
Good build…when are we gonna see the civic that’s in storage…real ones that follow the channel know what I’m talking about ?!
JDM right hand drive, yeah?
Can't wait.
Rebirth is 🔥🔥🔥🔥 hey I have a question have you ever heard of crank walk on k series
Dana level UP!
Let's go static my boy 💪💪💪
was thinking about wrapping my ek hatch
Rebirth is wicked, build a ads mors sniper works great on that small map
Here for it, no cod for me
So I have a question I have a d16z6 was wondering when welding the catch can bungs do I have to have a baffle also on the inside of the bungs
Hey. Are any of your swaps Smog Legal? Which car can it be done.
Yoooo what the gamer tag bruh let’s get it
you tires were pointing inwards which causes the shake , you should get it realigned and point the tires outwards with toe
Let's goo!!!
Last week years old 😂😂
If the body panels are on the car, it makes the wrap easier to put on
If you put ati damper will absorbe some of the vibration
wish my car ran like yours xD mine has idling problems along with jolting when in gear but sometimes works perfectly
probably the iacv, might need to bleed your coolant 👍
That’s call an eye-lignment 😂
Uk clusters are MPH it will be an EU one.
Does Erik still have his sedan with him?
Do You Have Any Advise For A Honda Del Sol. Its Got A Engine Swap, Its Got A Ab16 Engine in it and The Spedometer Does Not Work Now.
Sounds like the speed sensor on the transmission is bad
@@robindabank3737 Put a New 1 On Yesterday, Still Not Working.
@@Iseekoutthetruth does rpm, gas and temp work or all doesn’t?
@@robindabank3737 Everything Works Except The Speedometer. All The Fuses Are Good Also And It Looks Like Someone Put A New Connector On The Speed Sensor At Sometime.
I didn’t even know you could rip vinyl wrap 😂
Not UK spec cluster as we do mph not kph
Maybe Canada-Spec, eh? 😂
Do you think its okay to do oil change on a ramp? like u drive the front wheel on 2 ramps?
That’s perfectly fine bro a lot of people do that
100% Ok to do so. You wouldn't want to check oil or fluid levels with the front of the vehicle on ramps. Reason being the car wouldn't be leveled and you wouldn't get an accurate reading. But if you empty the oil pan and you know how many quarts your car takes then there you go.
Not a problem but I prefer jacking the car up and two jackstands and using a tire to put under the car lot of work but it’s not to bad as long as it’s safe
😜👍🇦🇺
First comment 24 seconds haha
✌🏻🇳🇱
I'm from south Africa... George Garden Route... how do I personally get in touch with you... been following you for a couple of years now... Holla at me G'! Power of Dreams#
Going k in an wf is soooooo expensive
warzone
Cut away from yourself not towards yourself