You are a LIFE SAVER!! Thank you for this video, struggling for over an hour trying to get this off! Never would have figured this out without you! Thanks for stepping in for my dad🙏 on this project!
NEAT video! I know I would have been confused how to get that thing out, if I were to have tried to change the lock on my house. Thanks to this video, I now know how to do it!
Sir thank you for this video ever seen one of these locks before and it threw me for a loop so the first thing I did better get on TH-cam and see if nobody knows about these locks once again thank you for the video I subscribed to your channel I will look forward to seeing more you videos have a nice day thank you!
The only thing I would say on your video which was quite informative as it would be very helpful to a lot of people if you would tell them what size Allen key is required to remove that setscrew
I am having issues removing the cylinder from a Baldwin deadbolt, do you have similar instructions on Baldwin deadbolts or do they also use Allen screws to hold in place, thank you
So what deadbolt would you recommend to carry that is as universal that you can swap out the cylinders to different keyways? It’s really a great concept but theres definitely flaws. Would be nice to not have to carry a hundred different deadbolts with different finishes and keyways.
Thanks for this video. I need to remove an old old (1955) Lori single cylinder deadbolt on my door for which the key has been long gone. I got the cylinder out, but cannot get the inside thumb-turn out. There are no screws that I can see on the inside of the door. Any ideas?
Along with don't cross thread the cylinder, don't put it in crooked then crank down hard on the setscrew. I've had cylinders that are very difficult to get out and reinstall because some idiot seriously mangled the threads.
Omnia Mortice Cylinder installed in the Lori Deadbolt. Almost any Brand of Mortice cylinder can be installed in the Lori which makes the lock sometimes difficult to ID.
You are a LIFE SAVER!! Thank you for this video, struggling for over an hour trying to get this off! Never would have figured this out without you! Thanks for stepping in for my dad🙏 on this project!
Thank you so much mate, I am in Australia, and you solved my problem all the way here.
Thank you sir, I stopped trying to figure lock out because I was affraid I would tear up door in the process. this video is a life saver.
We used to use these all the time....hardly at all anymore because of covert-a-cylinders. Good video!
NEAT video! I know I would have been confused how to get that thing out, if I were to have tried to change the lock on my house. Thanks to this video, I now know how to do it!
Thanks!
I had not dealt with Lori Deadbolts yet. Thank You for the Educational Videos.
Love your videos
What is the size of the allen wrench?
This video is life saver and I learned something today. Thank you!!!
5/64” Allan Wrench (Long Reach)
Thank you sir,i will be putting that in the tool box
Sir thank you for this video ever seen one of these locks before and it threw me for a loop so the first thing I did better get on TH-cam and see if nobody knows about these locks once again thank you for the video I subscribed to your channel I will look forward to seeing more you videos have a nice day thank you!
The only thing I would say on your video which was quite informative as it would be very helpful to a lot of people if you would tell them what size Allen key is required to remove that setscrew
5/16” and mentioned a few times in the video and in the description.
Huge help! Thank you
I don’t run across them too often but I always have to figure it out.
Nice video as always Mr lock. Very helpful Thank you & have a nice day.
Thanks
Thank you so much. I needed this help.
Lefty Luci Righty Tighty. Thats what they told me in 87 when I first started Traffic signals 🙂
Thanks for the video not familiar with this lori deadbolt what size allen wrench did you use?
5/64” Long Reach Allan Wrench.
The one that fits 🤗
@@24hrMrLocksmith well you did say it was a 5/16” in another comment…..
I am having issues removing the cylinder from a Baldwin deadbolt, do you have similar instructions on Baldwin deadbolts or do they also use Allen screws to hold in place, thank you
So what deadbolt would you recommend to carry that is as universal that you can swap out the cylinders to different keyways? It’s really a great concept but theres definitely flaws. Would be nice to not have to carry a hundred different deadbolts with different finishes and keyways.
Nice !
Thanks for this video. I need to remove an old old (1955) Lori single cylinder deadbolt on my door for which the key has been long gone. I got the cylinder out, but cannot get the inside thumb-turn out. There are no screws that I can see on the inside of the door. Any ideas?
What's the size of Allen drive thanks
Along with don't cross thread the cylinder, don't put it in crooked then crank down hard on the setscrew. I've had cylinders that are very difficult to get out and reinstall because some idiot seriously mangled the threads.
OH! I usually call them Omnia deadbolts. Glad they have other names
Omnia Mortice Cylinder installed in the Lori Deadbolt. Almost any Brand of Mortice cylinder can be installed in the Lori which makes the lock sometimes difficult to ID.
What if you don’t have the key?
How do you remove a rounded out set screw?
Different manufacturers make allen wrenches with rounded ends, which they claim can help remove rounded out screws.
Yo, what size is that Allen? I swear I tried my whole collection and none of them fit right.
Door is closed and key missed - what will do ?
I can't get to the face plate
Open the door?
If the door is closed or locked you must open the door to access the faceplate.
177 likes, 0 dislikes.