Cabin in the Woods 27: Tricky Metal Roof Flashing Details and Large Windows

[@gallente4TW]

This bloke is the Bob Ross of construction. 😊

[@1GameKeeper]

Incredible that the building is still flexing so much

[@kiennguyenthe9898]

With Ryan's th-cam.com/users/postUgkxy_pn55PK60wAV3X_C_RoLS_67mNonoCE plan I was like one taken by the hand and led step by step from start to finish. Thank you very much Ryan!

[@mikenicholson2548]

Kyle you are the on that has to go to sleep at night with your work. So what you think is needed to waterproof your buildings is the right thing to do. 👍👍👍👍👍

[@joemissanelli3395]

You said to grab the 6’ level!

[@RRBuildings]

I knew it

[@rsp6549]

@@RRBuildings Yea, but he was already out of earshot and you should have waited for acknowledgement. Your error-correction protocol needs work.

[@billysmith0200]

@@RRBuildings you did but say it BUT !! EVEN I MISSED IT AND HAD TO PLAY BACK SO IF GREG WAS ON HIS WAY DOWN AT THE TIME HE WOULD NOT HEAR YOU I TOLD MY WIFE TO SHUT UP THE OTHER DAY WHEN SHE WALKED OUT OF THE ROOM SHE DID NOT HEAR ME BUT I DEF SAID IT HAHAH CHACK IT OUT ON IG WG.DEVELOPMENTS

[@TheCts0511]

billy smith This made me laugh out loud. 😂

[@smcox1991]

He said grab the 4’ maybe even the 6’ 😂🤣

[@mikeshivers3956]

You guys have been lucky with all of the nice weather we've had the last few weeks

[@marcos1976ful]

Very nice job in YOU explaining perfect.
You the Best of the Best 👍👍👍👍👍

[@keepcalmandfarmon5401]

Both of you pulling the film off the window and KNOWING you were going to get shocked was down-right FUNNY!

[@davidrobins4025]

You demonstrate well all the details in doing this work. Time consuming, but you have the satisfaction of knowing it was done right and looks great. Great video and sound.

[@anthonysmith9410]

Hi Kyle.... love your detail work! Really great!
I just wish all contractors would be so honest and just do the right job that the customers paying for.
I do everyday the best I can... I dont cut corners or cheat the customer. Keep up the great work that both of you guys do.

[@mule666]

It's all about time and money

[@lisawallace3124]

Gotta say...I LOVE seeing how clean your site is! We had a house built in 2021 and the sheer amount of GARBAGE left lying around was insane. Half full soda cans that were left to drywall over...soda cans left inside the cavity for the gas fireplace. An entire box of roofing nails was dropped in the front yard and they just put sod over them. You guys certainly do a high quality, detail oriented job!!

[@Tiger28ism]

Thanks and Recommended for all to follow this shed plans

[@matteberry58]

Your sheet metal skills making the wall to porch roof flashing are mind boggling.

[@smic1961]

Yep! I heard it! You said the 6 footer too! Love the project! Watching this one closely!

[@frazer26]

During lock down I help my neighbour build a greenhouse, every panel had plastic protection and got a shock of every one. I feel your pain

[@mikemcmanaman7634]

I'd have to say that both you guys are pretty decent sheet metal workers. Nice work.

[@connormcgee6398]

Who would you recommend watching that is better or more skilled out of curiosity.

[@rickcassell9613]

Boy it’s coming along nice . This Cabin is going to be one of a kind with your excellent workmanship, love watching it come to life 👍👍

[@keymanduff]

You say it's all in the detail and to most that may be right but it's because of teem work and motivation and a great deal of skill that makes it all come tougher. I like your videos keep them coming.

[@dokmanian]

belt and suspenders I would say you don't need silicon around window but so easy and cheap to do it now and not worry about it but that metal trimming wow great great work

[@lucanos6]

Kyle is RIGHT!!! Greetings from Bolivia.

[@SuperBrockolee]

I love how you make it up as you go👍

[@mikez4132]

You spent more time on one corner than the crew did on my entire addition flashing/siding. Then I go behind and fix things after they leave. lol Nice work brother.

[@sgs753]

Can't wait for the next episode. Please don't stop filming until it's finished!!!!
By the way..... I'm watching you guys from Germany.

[@a_w_bukhari7579]

What a wealth of Info on this channel! Thanks!

[@TheExcellentLaborer]

I found your channel last week. Love how detailed your videos are! I need to learn how to make my videos more like that. Great video!

[@katherinecarroll3706]

I am really enjoying this build

[@micdiva]

I like the silicone. It cant hurt it. Never a bad thing to go above and beyond in my eyes

[@vinnypinatelli221]

Yes cant wait for the inside! I am not looking forward to this to end I love it and your both doing an amazing job love it man thanks for sharing brother

[@sgsax]

I can't say if caulking the top of the window frame is necessary or not, but from a purely time and materials standpoint, you're not losing a measurable amount of money doing it so it surely wouldn't hurt.

[@sclagutirosrl4779]

As always, great job guys! We are watching your channel in Romania. We wish you good luck and prosperity!

[@joekosak9131]

That darn rebar in the cement, leads too static shocks. I have had that happen to me. An eye opener to say the least. You guys have fun while doing exceptional work , thats awesome

[@robertalexander9931]

Shocking video. You did say grab the 6 ft also.

[@user-hl4bg4le8d]

2階の屋根の勾配の下りと１階の下屋の屋根の勾配に合わせの縦張りのトタンの切り合わせが上手く寸法取りが大変と思いますが慣れてる感じがしました。１階から2階の中間迄ビス打ちと１階の破風の絡みも後付けの破風を付けて。足場が車輪付きのリフトで出来るんですね。

[@jamesbarlow6243]

Love the channel, but think you are insane for handling metal roofing/siding without gloves!

[@tommythuntdeer]

Very exciting project! I love the Versetta Stone!

[@Tbruntz96]

Hey Kyle, don’t know if anyone has told you or not but if you spray the window clings with water before you pull them off it gets rid of the static!

[@jakubsebor4756]

RR Buildings
, You should apply WeatherLogic tape to the corner detail before installing the steel.

[@michaelplays2449]

Great build guys !

[@jlmfoy365]

What a great watch these videos are, thank you. Regards Jim UK.

[@ashleighzee1611]

Looking forward to the interior. Thanks for posting another episode.

[@MrPhotodoc]

You make it look easy.

[@Allotmentandstuff]

It's Shocking how much fun you guys have lol

[@johnryan1698]

Good stuff Brother. Looking forward to the next video

[@turnpikebear]

Great video. You guys are awesome. You obviously love what you do by having a great time working as a team and also doing great quality work.

[@michaelboyles9329]

Love the channel! Learning a lot about pole buildings. Ur skills and ur metal wool is awesome dude!

[@kevinwilliams8662]

Enjoying the show

[@damoncoates395]

I heard you say grab the 6' as well. This building is amazing. Really enjoying the videos and can't wait for interior.

[@michaelbrennan7148]

Looks great. Thanks for posting..

[@ckcuev]

i finally got my RR shirt. i'm happy with it. keep making great videos

[@gardenman3]

That is one cool end wall

[@johnhunter273]

Love those details! I miss custom metal bending...... HVAC metal shop, still enjoy seeing the details!

[@nathanpreston4654]

Can’t wait to see the fireplace finished

[@ericlarkin6563]

Nice job, keep chipping away at it.

[@mjboy8790]

Per usual, absolutely beautiful detailing.

[@mr.habakkuk830]

Beautiful job on the corner of the roof. Also, you stated is the bead of caulking above the newly installed windows is necessary? I say DEFINITELY YES, 1st as a business owner; your name is attached to the quality of work you provide to the customer. 2nd, I rather over kill any detailed installation, especially when it’s dealing with rain!
Stay safe and continue putting out quality for the DIY’s on TH-cam.

[@jimhealey6858]

That's using your head Greg!! Getting those windows on the lift.

[@fredericrike5974]

You build it and edit it, I'll be here! KOKO

[@Garth2011]

It's getting to look a lot like a warehouse vs. "cabin". It's a large cabin. One thing I've noticed over the years of buildings and their fireplaces/chimney's is the placement of windows near them. From the outside, these 6 windows look nice however, for the inside, it creates too much glare when taking in the fireplace decore and style, if it will have some. During daytime, those windows will allow too much light around the stone work inside, if it will have some, which prevents a clear observation of the overall fireplace/chimney build. Hope they have a raised hearth too.
BTW, re the levels, you did tell Greg to bring the 4 footer and also the 6 footer at the same time.

[@johnkmcgregor5209]

Garth Clark you are right re the look. It’s like a posh outlet store/factory not a hunting cabin. Not RRs fault but the architect, I wouldn’t touch it with a barge pole.

[@erikjohansson8098]

It’s great to see your work, you do it exactly the same way We do It in Sweden. The same tools(mostley with Milwaukee) and the same procedures.I guess and hope that We have the same requirements as you have. Love watching you work man.We use the same snipps. But We use the plane 90 degress angel tool.

[@robertoparets7782]

Is looking great keep working the way you guys are now

[@deeeeeeps]

I would recommend sloping the bottom window sills, it's code. That way the if the window leaks the water runs out and not into your insulation. Also, flex tape works great for the corners.

[@04UltraRyder]

yes you did say grab the 6 footer too

[@codydonovan7356]

You're pretty brave handling that cut steel with no gloves!

[@joefleming8568]

Nobody can stand around and watch Kyle do the majority of the work like Greg.

[@timsheteron7903]

I thought Greg is always wrong. Right BOSS MAN!! LOL

[@Boxdude22]

You guys are awesome!

[@victoryconstruccion5277]

Excelent work , congratulation from Argentina

[@sthomas7263]

you two are doing a great job

[@rolandohernandez761]

Man I like your buildings bro 👍

[@papadave9061]

When in doubt......do whatever the boss is thinking, not what he says. hahaha Kyle, you did say "maybe" bring the 6 footer. To me, that means the 6', the 4', the torpedo, the extended Stabila, AND the laser. :) Did I miss one?

[@normhowes2975]

You missed the extra long one.

[@alextheus9867]

Static Electricity is no joke. I used to work in a cursed architecture office where I had to install a ground to conduit so I could short out before touching my mouse or the computer. Razer customer service is great.

[@edwardbickford4666]

Gregg you were wrong, sorry! Must be hard working for a perfectionist LOL! Love your work, you are artists!!

[@BraxxJuventa]

He said: "Grab a footer too" 👍😁

[@colinblankenship2401]

details details. Nice job

[@dannygeouge8459]

that peeling the plastic off the windows was hilarious, "dude, can I get a video of you doing it"....great laughs on a Monday morning!

[@SampsonRoofing]

Looks amazing

[@odin-eliottodinson7330]

Too bad we can't like and share. You were right Kyle.... So here's my comment.

[@joha7484]

again, very excellent curves and angles !!!

[@rjacko7478]

Looking good 👍

[@davidbray4881]

Try putting a half a dryer sheet inside each shoe. This will take care of the static shocks. I swear it works.

[@CKPill]

This looks why you have not finished the home remodel. Great stuff thanks

[@sebastianaskedal2688]

17:47... two girls having fun at site :D

[@freddien7]

Another great video, Should have put the title as "Shocking", Static will get you every time. Thanks from the UK.

[@garagedweller7159]

You said"Maybe even the six footer " Sorry Greg.
I like the tape detail,Not overkill to me just right.

[@LucasFerreira-ib7th]

Hello from Brasil, you're amazing constructor

[@TheRooster1122]

Superb work Kyle..!!!

[@nivkcjdhh]

Helllllllll yeah Kyle! Ive got about 4 minutes left on standing seam at music garage. Guess ill drink coffee a bit longer lol

[@daryldavirro4237]

Can't wait for the next one

[@douglasthompson2740]

Sorry you said "maybe" to Greg on the six foot level. I don't think you are overdoing at all with your tape. Matter of fact I personally feel you are perhaps under doing. I very much like to do a full shingle wrap on the frame, install the window with caulk and then do the final wrap with tape over the nailing flanges. I live in wind and rain with very little yearly drying time so I am paranoid with penetrations. Hence also my preference for screws (the new really flat pancake ss ones are ideal) because as you stated, "no product lasts forever". When it comes time to replace screws are so much easier and neater. I haven't yet used them on the window trims but it wouldn't be a bad idea to ease the removal of J channel etc.

[@tittyskillet3413]

I love this channel

[@adrianwalker9416]

When you going to learn not to argue with the boss Greg!

[@marinermonty]

Your attention to detail is phenomenal, you have the gift of gab and the ability to explain concepts very well ! Really enjoy you videos ! What metal supplier are you using for your roofing material ?
What is the major difference between prefab and on site fabrication off the rolls ?

[@hanzon]

God Job 👍😎

[@arayahomes4308]

I love your videos, not a huge fan of relying on caulk unless it's totally necessarry and I think the flashing details should have been kicked off with a peel and stick flexible membrane around the housewrap and plywood joint on flat where the vertical wall and roof ply meet, than putting flashing as you have. Looks great and I bet it will last a long time, I just think it is a bit of a weakpoint that joint there and that spot will see a lot of rain. I'm sure it's fine but I am just thinking there's a better way to do this to sleep well at night about it.

[@markarmstrong2592]

You were right Greg wrong and also the BOSS is always right anyway

[@Chiodi4real]

You guys are amazing, great job.

[@wackbatt4746]

great work

[@SailorBrian]

Looks like your white truck is shaking too. you should shore that up! :P

[@sebastianrepisarda8403]

Hola!!!! Vi toda la serie!!!!! Un pena que no tiene subtítulos en español!!! Por favor ponganlos!!!!!! Felicitaciones buen trabajo gracias por compartir sus conocimientos

[@joshuakemblebluegrass838]

Yup you said get the 6’ level too