How to Turn A Wooden Box That Sells, Woodturning Projects that Sell!!
ฝัง
- เผยแพร่เมื่อ 24 ก.ค. 2021
- How to Turn A Wooden Box That Sells, Woodturning Projects that Sell!!
In this Video I walk you through the steps to Production turn small boxes that are garanteed to sell at your next Craft Show, Unless your family and friends take them first. Thanks for Watching!!
Website
www.deanswoodworking.com/
Facebook
/ deansfinewoodworking
Instagram
/ deans_woodworking
The following links are affiliate links to items that I use in my shop.
Any potential purchasing or even clicking on these links will help support the channel
Making it possible for me to continue to create more content for you.
Many of these items you have seen in use in the videos.
Tools I use
3/8 Double end Ball Mill amzn.to/3mDhFie
CHUCKS AND MOUNTING
Bottle Stopper Chuck amzn.to/342ohjM
Nova G3 Chuck amzn.to/3zhBtgl
Nova Infinity quick change chuck amzn.to/3mEBKod
Oneway Talon Chuck amzn.to/3z1Jhm2
Oneway Stronghold Chuck amzn.to/3Hx4Q15
Oneway Live Center MT2 amzn.to/3quwu7N
Oneway Live Center MT3 amzn.to/3sThzXR
SHARPENING
Oneway Wolverine Jig amzn.to/3EABvAN
FINISHES
Min/Wax Antique oil finish amzn.to/3ExF36M
SUPPLIES
Bottle Stopper hardware Standing 10 pk amzn.to/3Jg4gGq
Bottle Stopper hardware Cone 6pk amzn.to/3HiqR3g
Ornament Hangers Silver amzn.to/31bwG3k
Ornament Hangers Gold amzn.to/32HcxCw
BOOKS
Book Classic Forms amzn.to/3z2AqQZ - แนวปฏิบัติและการใช้ชีวิต
The Drill bit size is Forstner bit 5/8" The Twist drill is 1//2" Thanks for Watching!!
For me it’s been a long time coming. (Sounds like lyrics from a Neil Young song) I love how you put together a section of your video that quickly (quickly being the operative word) goes through the steps required to do the project. Usually folks go on and on explaining the steps. Some folks like me just need a quick refresher on the directions. Thanks for that!
I can't wait to give this a try, thank you!
Excellent video
Thank you very much!
Thanks for the demonstration and inspiration. Much appreciated. Best wishes from Cologne, Germany.
My pleasure! Thanks for Watching!!!
As a beginner, this is right up my alley! Thanks!
Your Welcome,Thanks for Watching!!!
Thanks for sharing your knowledge.
Thanks Len I really appreciatte you commenting and watching!!!
Love your stuff Dean. Great videos. Tom from 🇦🇺 Australia
Thanks Tom, Glad you like them!
Great tips and advice.
Perhaps a bit larger inside and out diameter and a bit longer would make a great gift idea for cigar smokers.
Kind of a pocket protector for the cigar.
Thanks again.
👍👍👍🍻
Yes and you can actually buy kits for those or just make these larger and then you don't have to buy the kit. Thanks for watching
Those are cool! I bet knitters would like them for holding their double pointed needles!
ABSOLUTELY!!! or their cable holders... or stitch markers... or yarn needles... or... you get the idea. :-)
Real good item. Easy to do. Like it very much.
Glad you like it!
Amazingly AWESOME!!!
Thanks!!
Great job Dean .
Love the end result.
Thanks for sharing.
Tom from Australia
Thanks Tom, And Thanks for Watching!!! 👍
Thnx for sharing Dean!
My pleasure, Thanks for Watching!!!
Cool! So many uses for these!
Thanks for the Comment and thanks for Watching!!
Brilliant! So enjoyed this.
Glad you enjoyed it, Thanks for Watching!!!
Great little project's Dean nicely done 😀👍
Glad you enjoyed it, Thanks for Watching!!!
Nice video, Dean. Thanks for sharing it with us.
Thanks George and Thanks for Watching!!!
Nice video Dean. Good job presenting the techniques and editing the video to keep it a good length.
Thanks 👍 and Thanks for Watching!!!
Brilliant, you've given me another idea for my first attempt at a craft show, I'm in the UK, so not in competition with you Dean, take care and happy turning 🙂🙂
Fantastic! Thanks for Watching!!!
Great idea Dean thanks, good use for those extra pen blanks
Thanks Todd and Thanks for Watching!!!
Great idea Dean, thanks for sharing
Very welcome, Thanks for Watching!!!
What great project, thank you for sharing.
Thanks for watching!
What size spigot jaws for nova chuck?
Neat little project. Thanks!
Glad you like it Jon, Thanks for Watching!!!
Going to make a bunch of these for my next show,thanks
Thank You Art! Happy New Year!!
Like these.. great job!
Glad you like them! Thank You!!
Great project
Thanks Doug!!!
I like what you do good job Thanks 😊
Thank you Randy, and Thanks for Watching!!!
I need to make a BUNCH of these for my wife's double pointed knitting needles. You don't have a hand out sheet with the steps for production do you?
Sorry Cliff, I do not. Thanks for Watching!!
They look nice
Thanks Richard, and Thanks for Watching!!!
C’est très jolie Dean’s petit mais bien réalisé bravo 👍
Thanks Denis and Thanks for Watching!!!!
Nice..
Thanks Greg and Thanks for Watching!!!
Do you have any advice on how to deal with alignment issues when fitting the lid to the body? Once I've got the tenon cut and fitted correctly, I turn the whole piece round, but once you move the lid, it's clear they don't match up anymore. It's like the tenon, or something else, is slightly off center. The issue is present no matter what drive center or chuck configuration I use. It seems to be present no matter what.
Awesome video! I’m definitely making a few of these. Thank you for the video
Thank You, and Thanks for Watching!!!
@@DeansWoodworking
For clarification. What size drill bit did you use after the forstner bit? I didn’t hear you say , but it appears to be smaller in the video. It’s kinda hard to tell for sure though. I will be making a couple of these today. I am excited to try it out
Thanks again
The twist bit is 1/2", and the Forstner bit is 5/8" Hope that helps. Have fun and send me some photos of what you do. Thanks
Hello nice work there like it the video lags to much to watch it whole
If you make short V block with a 45 ° V , and make the block from a scrap of 2x2 x 8 you can hole your pieces solidly while you saw the ends off on band saw , or hand saw , without the work piece wobbling too much
Great tip! Thanks for Watching!!!
Nice job, I made one similar for holding tooth pics
Thanks Chris, and Thanks for Watching!!!
Looks great Dean. I need to find a way to hold it though, I don't have jaws that small. But I do want to make some of these.
Thanks Kip and Thanks for Watching!!!
Hi Dean, new subscriber, just found your channel, very nice idea, and a great training & skew practice that will pay me and use up a pile of cutoff :)
Lewis thanks for subscribing I’m glad you like the channel and most of all thanks for watching!!!
Do you put walnut oil on the inside too? Just found your channel recently, you are a great teacher and safety minded.
No John, i just leave the inside natural. Thanks for Watching!!!
Hi Dean, nice little boxes for small pieces of wood. I just have one question, and I’m sure I missed it in the video. You used a 5/8” forstner bit for the top, but what size twist bit did use for the bottom? A 1/2” bit? Thanks for another great video and turning demonstration. I always learn something from your videos! Thanks again. Steve
Thanks Steve. Yes the twist bit was 1/2 inch Thanks for Watching!!!
As someone that manages computer equipment for a living I sure would appreciate you getting that mouse away from all the sawdust and wood chips. 😜
Thanks for Watching Phil!!!
Hi Dean having watched you make these boxes I have made some but most when finished the top and body are eccentric to each other when assembled, I know its me, what am I doing wrong help please. The blanks are planed to dead square and all holes are carefully drilled.😰
That is normal with these and that is why it is important to align the grain before you turn the outside. most are not off by much, but for some reason some of them are off quiet a bit. Thanks for watching!!!
Thank you Dean for your answer it will help me so much.
Please continue with your advice tips.
Glad I could help.
I know I'll be making some of these for people I know that take emergency medications. But what would be your suggestion on what to use as a barrier between the wood and the medication. Not to say that it would cause any ill effects but some woods can transfer awful taste to the medication. Like chewables or like nitroglycerin being held under the tongue. Any suggestions would be greatly appreciated. Thank you for the wonderful video and the lessons I've learned that has helped me be a better woodworker.
shellac would be my first choice followed by a polly if you need a finish. I have never finished the inside and have had 0 complaints. Thanks for Watching!!!
Great little boxes, do you use regular food walnut oil on them?
I have, I think what I put on these is Mahoney's Thanks for Watching!!!
You mentioned in a small box video and used a tool you made for drilling and hollowing. Which video do watch for the making of that tool. Thanks
David here are the links Tool Handle th-cam.com/video/vdFSxUEbpHQ/w-d-xo.html and here is the link to the tool th-cam.com/video/wwPlnushM_0/w-d-xo.html Thanks for Watching!!!
Dean, what type of chuck jaws are you using?
Pen Jaws Thanks for Watching!!!
Thanks Dean. Just curious how much you sell them for?
Every area is different but I sell them for 10-12 Thanks for Watching!!!
@@DeansWoodworking Thanks for getting back to me!
Splif box
Thanks for Watching!!!
Where’s the craft show?
Angleton Texas first weekend in September
Nosferatu?
I need more info what is the question?