Hertz SV200L Midbass Drivers in Harley Bags with SPL Bagger Audio Speaker Rings. Part 1
ฝัง
- เผยแพร่เมื่อ 26 ส.ค. 2024
- In this video I install 8" Hertz SV200L Midbass Drivers into my Harley Bags using SPL Bagger Audio Speaker Rings.
I know that the back of the bags is a better spot for these speakers but the amps were there before the speakers, so... ya just have to work with what you have. Thanks for watching.
Hertz SV200L 8" Woofers. www.amazon.com...
SPL Speaker Rings. www.splbaggera...
This is the saw that I used to cut the hole in the bags.. www.amazon.com...
KOTTO Helping Hands Soldering Quad-da-Puss... www.amazon.com...
#harleystereo #sodastereo #stereo #stereotypes #stereosonic #stereotype
Really appreciate your in-depth step by step, great job 👏 thanks 🙏
Thanks, that means a lot. 👍
I run 4 SV 200.1 in front 2 SV 200 L in rear but going to add 2 more to be 4 total in rear 2 on each on each dirty bird lids. Also their cut off at 50Hz
Awesome man!! Very nice work!! I enjoy some good tu es riding as well and for you. To have full range, crossover, and bass!! Enjoy!! Look forward to the next video!!
Right on thanks, next video will be out this weekend. Thanks for watching 👍🏻
😂you said it just like him nvs video are very informative an helpful
I kind of new that voice but wasn’t 100% too sure it was you
.As always, pretty good information in your videos
Lol. It’s taken me two years to settle on a name for myself. Lancer is what everyone at work calls me so I might as well just use it. Thanks for watching. 👍🏻
@@i.b.lancer nice to meet you Lancer. After I saw how you installed your front speakers lower pods on one of your videos I went ahead and installed mine. Oh man I couldn’t be any more happier. Thanks a lot👌
That’s awesome, glad to hear it 👍🏻.
@@i.b.lancer Hi Lancer, finally am done with my bike. Adding this kit with the hertz and the dsr1 it really made the difference. I could not done it without your help. Cheers 👌
That is so awesome. 👍🏻. I’m glad I could help.
Loved your vid great job. Still you shoulda put a real sub in. Your gonna be pushing that woffer for all its worth and with a sub you can turn it down to desired bass level
Came out clean nice work. Not sure if anyone has mentioned but you shoulda used a sub .
where did you get the 12 guage 4 pin automotive connectors? thank you in advance. great detailed video.
store.polarwire.com/weather-pack-12ga-4-pole-pigtail/
was loving the SPL rings but that price was way out of line for a plastic ring and mesh,that also in the end you were trimming
What silicone spray do you recommend to apply to the speaker?
Hi, thanks for watching. You want to get a silicon waterproofing spray. The kind of stuff you spray on rain jackets and such. Keep in mind that speaker companies will tell you that this is not a recommended treatment but I've been putting this kind of spray on speakers for decades and have never had an issue. Do so at your own risk.. just say'n.
what size hole do you cut to fit 8"subs? bottom corner of Stock bags
The hole I cut out was 7".
Shoulda jumped into a sub. If you wanted real sound. Throw 6.5 ct sound subs in .
No depth for those kind of subs in Harley bags. You’re pretty much stuck with shallow subs.
@gabe giguere
Subs take a lot more work, bracing, sealing and porting bags...depending on the Subs you will also have to fiberglass the inside of the bags to reinforce them....
@I.B. Nice and clean work bud!! What blade and saw did you use to cut the whole for the bag??
I used a body panel saw with a fine blade. This is the one I bought... amzn.to/42QgFdh It's pretty much the only saw type that I'd make this cut with.
Does it come with four bracelets to put two in each bag ??
Yes. www.splbaggeraudio.com/shop
Hey @I.B. What black sealant did you use???
Black silicone. You can find it at your auto parts store. Window sealant will do the trick as well.
How were you able to stop the vibration noises in the bags? If you have any.
I’m not hearing any serious vibration noises coming from the bags. You have to remember that these aren’t subs.
@@i.b.lancer yes I know. Subs wouldn't work in bags anyways. I have 8" GZ yellow baskets but even playing down to 55hz is low and bags rattle a little.
What did you use for quick connect on your amps power?
For the power I used Anderson type plugs.. amzn.to/2MS8StF
For the signal to the amp, these are industry standard. amzn.to/3cHrgQH
Cool. Now where do I put my tool kit and air pump and other miscellaneous stuff I need on the road
In your purse.
Where did you get the speaker lids for the bags?
Those are a kit that gets installed into your existing lids. I got mine from Vtwin Audio.
I can't tell a difference in sound
Nice job, question ❓ what do you have for amp ?
Audio Control 1.300 in each bag. Running at 2ohms.
First to comment! Sweet! I win!
I would not of cut a hole out for the speaker I would have put little holes in it instead
drilling Holes isn't as effiencent as properly cutting out the entire hole for more movement of the speaker
The kit offers you a template for drilling multiple holes if you choose.