Making Goby Soft Plastic Lure from Scratch
ฝัง
- เผยแพร่เมื่อ 21 ก.พ. 2022
- One of you requested a goby fish lure, so here I am. In this video, you will see how I design the model, mold, and the whole fabrication process. Remember to leave comments on what you'd like to see next.
Difficult Level: 4/5
3D design tool: Fusion 360
Slicer: Ultimaker Cura
3D printer: Longer LK4 Pro (PLA filament)
Plastisol: Dead On Plastix + remelt
Music credit:
Positive Fuse - French Fuse
Tropic Fuse - French Fuse
#baitmaking #luredeisgn #softplasticbait #fusion360 #diy - แนวปฏิบัติและการใช้ชีวิต
Super kool!
And I think it's perfect sized
Wow looks like the real thing nice job
Dang that 3d printed mold looks really good and the Goby model turned out great!
That’s so cool. 😮
Nice work and looks great!
Thanks man 👊
Looks great
Thanks!
Awesome video. I fish lake st. Clair, we have goby, that would be an awesome mold for me.
Goby are usually found around mangroves mudflats or both. they use their top spectral fin to signal or challenge each other to a fight over positions on the flats/mangroves
Wooow
great
Oh and a quick tip, you don't need to use surfaces to split, you can just draw lines. Makes it a little easier to deal with for me.
Yes that would have simplified the splitting process. Thanks for the tip!
wow, I'm impressed... great job. I won't miss any videos from now on. best regards from Germany =)
Did you upload the file somewhere?
The lure looks amazing but I think it would look even beter with just a little smaller pectoral fins
Thanks for the comment. It's an easy fix or customization - just trim it to your liking like cutting out the flashing :P If it's too small then I will have to redo the mold. Evan that it's still possible. It's the beauty of the DIY lure making - you have all the controls. Cheers!
this is incredible , dod u sell those molds?
Thank you. Currently I don’t have a plan on selling my designs. Please come back and check, this might change in the near future.
Looks great I would make it a with a paddle tail!!! length I would go 2.8 inces how would you go about using a weighted hook in the mold
All suggestions sound good. I was going for a resting (or slow crawling) goby but paddle tail would definitely add the action. I was thinking about embedding a hook in the mold too. Next time when I revisit this design, make those changes. Thanks for watching and leaving comments.
@yauckoutdoors do you make the molds for you're self or for purchase if so I'll like to talk about a custum mold for myself
Mostly for my personal use. Email me (email in my about page) if you want to talk more.
What software and machine you use to do this? I’ll like to learn how to do this.
I am using a software called Fusion 360, it’s free to download. My 3d printer is from Longer, LK4 pro. Welcome to the bait making world!
What material is ur mold made if? Resin?
PLA. Thanks for watching.
Looks like you found the right Goby I mentioned to you. The mold looks amazing. Would you consider selling one to me.
Thanks. Let's chat more in the email, which can be found in my Channel page under About.
What are the goby lures for? I have never seen an animal that looks like the goby lure’s especially down south.
Apparently everything in Erie eats goby. I guess it’s the up north thing. This video was requested by a sub therefore I am not the best person to answer 😋
Brought to North America via ballasts of container ships from Eastern Europe. They are quite invasive in the Great Lakes and St. Lawrence seaway but in the last 20 years everything has started gorging on them. Smallmouth bass in these waters love 'em, and are becoming obese eating them ;)
cant wait for the frog
Working on it!
@@yauckoutdoors can I have it :) I have subscribed
At some point I might do a giveaway. Remember to turn on the notification so you know when that happens :)
@@yauckoutdoors yay already on
Do you want to share stl of this goby? Its awesome
Working on the improvements. Should be up on cults3d later. Please stay tuned.
No way we call that boonoog here in Hawaii they are great baits
I want some
Oh cool! How do you get them?
@@yauckoutdoors we catch them in the tide pools with small scoop nets
What would you charge for a mold
I am in the process of uploading files to Cults. Please stay tuned and check the post on the channel page.
wow, This is so cool, I'm very interested in this,I'm trying to do it myself, But I have some problems, Can you help me? 1. I don't know what printing material should I use? 2. How much is appropriate for printing infill density? 3. What are you smearing on the mold with the toothbrush in your video? If, you can answer me, I will thank you very much
I mainly use PLA because they are easy to work with. There are other materials that can handle heat better like PETG, but I don’t have experience with it. For infill, I think 10% 2 lines should be good. That’s what I use. But sometimes I use 20% for thinner open pour molds, because I don’t clamp it when pouring. Hope this helps.
The oil was fish attractant (classic bass) scent oil. It lubricates the molds and attracts fish at the same time 😄
@@yauckoutdoors Thank you very much, I am also a design lover of fishing bait, but I am just getting started, and there are still many problems that have not been solved. I hope I can communicate with you more and learn more knowledge
@@zhenggong3560 you are welcome. Just leave comments/questions, I will try my best to answer.
Hey there im a subscriber to youre channel i do a lot of smallmouth bass fishing i use a deepsleeper made buy magabass 2.8 version 1/2 once weight built inside the swimbait ?i was wondering if you can make a mold similar to it
It doesn’t look too complicated so shouldn’t be a problem.
Do you make your Fusion files or STL's available?
I design those molds in fusion 360 myself. It’s one of my hobbies and I love to share how-to’s on TH-cam. Let me know if you have questions. Cheers!
@@yauckoutdoors do you share your STL's?
@@Darryl.M not currently.
@@yauckoutdoors or sell them?
@@Darryl.M sorry not currently. One day when I have the paid license for Fusion 360, I would.
Hi I love the channel! I just started a tackle company recently making swimbaits and was wondering if you might be interested in designing a lure for me. Thanks for your time and keep up the great work!! 👍
Sounds interesting. pm me - you can find my email at about page.
Good afternoon, is it possible to buy this bait casting mold from you?
Are you interested in getting the mold or the design file? I might make this available in my sketchfab shop soon.
@@yauckoutdoors I would be more comfortable purchasing the mold itself. Would you be able to send it to Ukraine?
@@androidmaster5554 I don’t have a plan to sell the finished molds yet. What you could do is bring the file to a local 3D print shop and have it printed there. Please stay tuned.
How about a eelpout plastic
It would be a mixture between this goby and the tadpole :) what's the target species for eelpout lure? and what's the normal "bite size"?
I increased the infill to 90% to make it more heat resistant
Hi, nice job what type of filament are you using? Heat resistance of them are quite low for soft bait injection, but I see that’s working somehow 👍🏻
@@aurelpsenakPLA
Looks great, would you consider selling me a Goby mold like that
I will make some of my designs purchasable on sketchfab.com/yauckoutdoors/models once I finish the improvements. I will also post free ones once a while so stay tuned.
Hi
Hey thanks for stopping by.
Can you create a mold for me?
Please email me, let’s discuss details in email.
@@yauckoutdoors sounds good, whats your email?
@@tidalwoods7758 check my channel page, under contact. Thanks.
Yauckoutdoors @gmail, in case you are from the mobile app.
@@yauckoutdoors just sent you a email bud
Hii guy can u please help me with this if you don't mind l ask u small question 🙏
Hi there. Thanks for watching. What would you like to know?
@@yauckoutdoors l want know if u will make me some lures from what l draw then printer from 3d printer l will buy off u of link
You can PM me at my email (see my channel about page). Thanks.
There no email on l been look nothing there
Try goya_l and that’s a yahoo account. Didn’t want to make it too easy for spam bots.
Make smaller, make them thinner and sell copyright to Fiiish. Get wasted
Sounds good, let me check them out