Thank you so much for your videos and your help I wouldn’t have been able to do the job without your advice and your responses the kit is all welded in and the control arms are connected I just have a few cab mounts to replace the 2 above the rear bumper are going to be the trickiest
Thank you safe T cap!!! And you Justin for always being ahead of the curve I laughed out loud at 12:41 “that’s what we’re working with absolutely 0 light” 😂😂😂
You do good work however, when measuring frame alignment you really should be measuring using a transom, that way you are consistent front back on both sides. Just my opinion.
So all of my measurements are good but my lower control arm doesn’t line up it’s less than 1/2 an inch from bolting in did my rear diff shift after I discontinued everything
They always do. You’ll need to use a ratchet strap from the rear shock mount to the front lower control arm. That will give you the ability to pull the axle forward
I want to say thank you so much for the vids and answering my questions I got it tacked into place and the lower control arm hooked up I have to have a certified welder to finish the job it’s going to the shop tomorrow you helped me gain my confidence back I lost my dad we worked on projects together I haven’t done anything since he passed
Do the video with the center mount,you teach the masses do well,I was so glad I came across you over a year ago Justin.!!!!!
Thank you so much! Just about to place my safety caps and didn't have the measurements. No instructions in the ones I bought.
Thank you so much for your videos and your help I wouldn’t have been able to do the job without your advice and your responses the kit is all welded in and the control arms are connected I just have a few cab mounts to replace the 2 above the rear bumper are going to be the trickiest
Thank you safe T cap!!! And you Justin for always being ahead of the curve I laughed out loud at 12:41 “that’s what we’re working with absolutely 0 light” 😂😂😂
Great explanation. And I thought my 2001 TJ was rusty, but holy crap, this takes the cake. That thing must have been fun to drive into the shop :-)
WOW! That's some dangerous stuff,we just don't know what we are riding next to or in front of down the road thanks so much for educating us
I did this job a couple years ago in my garage on jack stands. It was a pain in the A but worked out pretty good… still holding together.
Great job. Just bought a 04 LJ with some trailing arm rust thru and will be calling you soon.
Awesome! Shoot me an email morfabindustries@gmail.com when you are ready!
@@MorFabIndustries Email sent Thank You
Sick intro, nice camera. 2023 year of Morfab
You do good work however, when measuring frame alignment you really should be measuring using a transom, that way you are consistent front back on both sides. Just my opinion.
Is there a body mount repair for the rear corner panel or included with the rear corner pannel
Great information thanks
How close can I weld the kit to the spring mount I’m about 3-4 inches away
Great new intro, very interesting video as always.
When you're welding or using the plasma cutter on these vehicles, what do you do to safeguard the gas tank, fuel lines, etc.?
How could I get mine fixed
love you stuff
So all of my measurements are good but my lower control arm doesn’t line up it’s less than 1/2 an inch from bolting in did my rear diff shift after I discontinued everything
They always do. You’ll need to use a ratchet strap from the rear shock mount to the front lower control arm. That will give you the ability to pull the axle forward
@@MorFabIndustries I saw that in your vid phew I thought I did something thanks for the response
I forgot to ask what size and type of wire do you use in the mig I have .30 flux
I want to say thank you so much for the vids and answering my questions I got it tacked into place and the lower control arm hooked up I have to have a certified welder to finish the job it’s going to the shop tomorrow you helped me gain my confidence back I lost my dad we worked on projects together I haven’t done anything since he passed
@@thehashmonkey that’s awesome! Thank you!!
Anyone know of a business doing this around the memphis tn or Jackson tn area?
I don’t see any unfortunately but there are shipping options if you want to get it to me. Email me morfabindustries@gmail.com
Do you do this repair for anybody?
Yes sir!
Can I get you to fix mine? I got a 97 tj with both sides on rear needing help! I tried to do it my self but I can’t weld!
𝙥𝙧𝙤𝙢𝙤𝙨𝙢 ✨