2g Eclipse DSM 420a - Idle Air Control (IAC) Valve cleaning/replacement
ฝัง
- เผยแพร่เมื่อ 7 ก.ย. 2024
- We clean and replace the Idle Air Control (IAC) Valve on our 97 Mitsubishi Eclipse 2g DSM project car. We also show you how to relearn idle, feel free to use this as a guide for reference. It's super easy to do, and can help with any weird idle issues you may have.
Don't forget to follow the build and SUBSCRIBE to stay up to date.
Leave a like, comment, and hit the bell so you don't miss out on any of our new content!
Thanks this video was well put together and helped me a lot
Thanks! I’m glad I could help ya 😁
Great video. Helped me even with my 3rdgen
Thanks! I’m glad it helped ya out 🤘😁
Dude the stock intake is better than that "cold air intake" fyi that's not a cold air intake its pulling from the engine bay without even a partition. And another tip the stock is a real cold air intake just without the cone filter. Delete the filter box and run a pip to the hole left by your old intake and stick the filter there
SetCraftatMadSplash did I miss where I called it a cold air intake? Cause I’m 100% aware that it’s not a cold air intake, it was on the car when I bought it lol. That intake won’t matter here shortly when I put the Hahn 16g turbo kit on.
I have cold engine idle surge until it warms up. Trying to figure it out. Considering replacing the iac but that might not be the problem.
Ty
Pls respond bro, like I did everything how I was supposed to , but now every time I go to neutral , the rpms don’t drop , they stay at like around 2k rpm
Did you clean it or replace it. If you cleaned it, then I’d try replacing it. If you replaced it then it could be something else then, maybe check your tps
Thank you sir 🙏
I just got a 95 2g and it idles fine cold but hot it idles high and it idles high as soon as I cut the ac on.
Mos1nTV maybe try adjusting your bis screw down a little. Or could be the iac, it’s cheap and easy enough to where it’s a good idea to probably replace it if you haven’t already
DebtLife Projects where is that exactly. Do you have a video mints location
Any luck? I have the same issue
Will you be showing step by step how to boost a 420a?
Yup. Idk about exactly how to, more like how I did it and hopefully it works lol. But i will be showing everything I do and go through, so you can learn from my mistakes with me
@@DebtLife_Projects hopefully soon and ate you going to make it a sick ass 420a build?
Got a question my throttle won’t respond or it won’t rev but it starts up and everything it gots a rebuilt motor with zero miles do you know why it won’t rev or go ?
I did clean it and test it wen ivturn the key he kind vibrates litlle and stops but i cant start the car now,any tips please
sounds sick honestly now I want cams. What were the symptoms you were having? my car has a check engine light for idle air control system and it idles kinda high and when I turn the A/C on the revs dip really low and bring themselves back up. the more I do it the less it seems to happen though as at first I turn the ac on and it repeatedly died down and brought itself back over and over and then a few days later I tried again and it dipped 2 or 3 times before steadying itself and today it barely dipped at all but it did dip. code is p0505 and p1294
so I replaced mine cause I did a pull and my car wouldnt stop going from 500 rpm to 2500 so when I took it out I found the icv was literally broken into 3 pieces so it was letting in all the air. new one cleared my engine codes (p0505)
Jacob S idk why I didn’t see these before, sorry! Hopefully you got it all squared away!
What size battery is that? Mine won’t clear the intake.. would probably be able to see if I wasn’t watching on a potato on my neighbors WiFi
Subscribed btw XD
Does your Eclipse have a MAF sensor?
What’s the yellow wire going that’s under your battery
I don't even remember honestly, sold the car a while ago, didn't really dig that far into it.
My 2g 95 dsm won’t rev pass 3000 rpm and when taking off on 1st it’s a very slow start then speed picks up. And check engine light came on
Figure it out?
Try new plugs and wires. old cars man
How much did it use to idle before you replaced your IAC
It used to be all over the place. It'd drop to 500, then up to 1k, then back down to 500, sometimes lower and almost dieing whenever i'd stop or use the lights or a/c. Replaced the iac valve and it seemed to have done the trick, no issues yet.
Appreciate the quick reply, switching from a 3rd gen to a 2nd in a week or so and it has an idle issue that stays at 2k rpm 😬 it had no vaccum leak
Mitsubishx ah ok cool. You could also check the bis screw to see if it’s backed out. There should be a screw near or on the throttle body that you can screw in or out to adjust idle. Just a thought
Mine sounds exactly the same i don't know if its cams tho
Me and a friend pulled the head apart when I first bought it, and found it has crowler stage 2 cams, and some head work was done to it. Maybe yours does too 🤔
Hopefully haha...I hope is nothing bad haha maybe I'll send you a video you can listen to it
@@DebtLife_Projects I really wanna do this with my eclipse, I want it to chop like this 😂
@@seekthecargeek2877 buy mine! It’s for sale lol 😆 but yeah the chop is entertaining, sounds good sitting in traffic, and people hella stare lol
Ever hear of pulsating dash lights and brake lights with a bouncy idle. Bounces on 900. I have a 98 eclipse gst
Hey I’ll buy your get for $500.....check your ground wires of the motor!!!!
Bro we have the exact same two cars an eclipse n mr2 😂
Hell yeah man, that’s awesome!
Looks like you forgot to plug that pcv hose back up
Finally someone noticed lol, I was waiting for that. Yeah, too much going on at once, completely forgot, realized it once I already made that clip, said meh I'll use it anyways lol
how much the idle control
mine had the same problems so i cleaned it followed all the instructions, i plug it into the wiring harness and it vibrates, but when i plug it back in the throttle body the car cranks and dies unless i rev it up but as soon as i stop revving it dies please help
Austin. Dsm did u ever figure it out bro, currently having the same issue
Working on the car in socks???
meh, apparently. Depends what i'm doin I guess lol. Guess I felt like I didn't need shoes for this 5 minute job? I have no clue lol 😂
@@DebtLife_Projects I can't say tm bc you def taught me where my IAC was and how to clean it 💀 I just got my first 2g dsm a few days ago
“Found out it has cams” bro there is no cam work in that thing shut up
Jahway Palmer it actually has crowler stage 2, .241/241 avg dur, 196/194 dur, @.050, .222/.224 lobe lift. Found that out while doing the head gasket 😉
DebtLife Projects 😬🔥
@@DebtLife_Projects good job not stooping to his level.