Goodday! Check this link. It's my old tutorial video on how to install key ignition switch. Maybe this one will answer your problem. th-cam.com/video/9ruIpyQyXZ8/w-d-xo.html Ride safe always!
Goodday! Yes, it depends on the wirings of the controller. Some controllers have different wirings. But as long as you know which wires are needed for this modification then it will be possible. Check this first tutorial vid that i made. The controller has different wirings. So i did different procedure too. th-cam.com/video/9ruIpyQyXZ8/w-d-xo.html Ride safe!🤟
@@mrcoco3562 even tho i have tried it already to connect them.. the only problem i have is that when i fully trotthle the ebike it turn off the bms of the 36v and it turn itself on after a 30 seconds.. used it like that for almost a year
Goodday! Yes, there's a small screw in the key ignition switch. You can check this video too: th-cam.com/video/9ruIpyQyXZ8/w-d-xo.html Ride safe always!🤟
I have a Phantomgogo R1 36v scooter. The make and model are Sine wave brushless controller 2HM-0. When I tested the 5v red wire coming out of the controller I found that the 5 volt Red Wire is pushing 17.44 volts. I am afraid of connectiing the.controller to the throttle because I do not want to damage the throttle. Is this high voltage normal or is it a defect? Will it destroy my throttle?
I tried to install one, and now my e-scooter just beeps and displays e0. The brake light doesn’t come on either, but works with just power to it. The headlight can still be turned on though it’s beeping but no power to the motor. What do I do to fix it?I have a controller with no wires, only pins, in case it helps
tanong lang po yung 500wats na controler pwdi ba syang palitan na controller 1000wats hindi kaya masisira yung hube motor na 500wats lang salmat sa sgot
Pede nmn kaadik kaya lng iinit un hub motor kase beyond na sa limit niya un wattage na ibibigay nun 1000w na controller. Aandar ng mas mabilis un hub motor pero magiinit din.
@@nidaesteda1042 Di nmn basta basta masisira un motor, basta wag ka lng magbabad ng matagal na naka throttle. kung baga pasundot sundot lang. Pero iinit pa rin. ride safe lage kaadik!
Check this link, for those who have throttle with key ignition kit.
th-cam.com/video/ljT0TvBaFu8/w-d-xo.html
brother . I loved the modifications to the E10. But do you have a way to make the scooter higher?
Thank you! This helped me fix the problem of the light always staying on
You're welcome.
I'm glad the video helps you.
Ride safe always!🤟
Thank you so much
You're welcome
Helped me out alot, I almost burned out my controller, first time using key+voltmeter combo.
I'm glad this vid helped you out.
Ride safe always!
Hi,i like your video but my problem my controller doesn't have the lock wire or switch wire the red one thank you
Goodday!
Check this link.
It's my old tutorial video on how to install key ignition switch.
Maybe this one will answer your problem.
th-cam.com/video/9ruIpyQyXZ8/w-d-xo.html
Ride safe always!
Can you use this on a stock razor mx350 controller?
can you do this on every scooter?
Goodday!
Yes, it depends on the wirings of the controller.
Some controllers have different wirings.
But as long as you know which wires are needed for this modification then it will be possible.
Check this first tutorial vid that i made.
The controller has different wirings.
So i did different procedure too.
th-cam.com/video/9ruIpyQyXZ8/w-d-xo.html
Ride safe!🤟
Hi bro nice video, how do I connect to my controller? It is a ZL controller
What if e bike controller has no single red wire? Only wires spare i have are-
red/black for lights
red/black x2 for brakes
Lodi can i ask if is possible to use a 36v 7.5ah on series Y connected to my 48v 20ah main battery to my 80a controller?
Goodday
Do you mean, you want to connect the two batteries in series to increase the voltage?
@@jaysonulanday yes lods correct
It is ok even if they both have BMS?
No please, its better to series it with same [ah] like 36v 7.5ah and 48v 7.5ah
@@mrcoco3562 even tho i have tried it already to connect them.. the only problem i have is that when i fully trotthle the ebike it turn off the bms of the 36v and it turn itself on after a 30 seconds.. used it like that for almost a year
@@mrcoco3562 i have always monitored the battery temperature and constant voltage of the 36v just to be sure
lods sana gumawa ka ng tutorial panu maglagay ng strobe lights turn signal sa 12v battery pack...sana mapansin
sir san po kau nakakabili ng accessories gaya ng dual stem bracket
how do u install the key ignition on the handlebar? any screw?
Goodday!
Yes, there's a small screw in the key ignition switch.
You can check this video too:
th-cam.com/video/9ruIpyQyXZ8/w-d-xo.html
Ride safe always!🤟
I have a Phantomgogo R1 36v scooter. The make and model are Sine wave brushless controller 2HM-0. When I tested the 5v red wire coming out of the controller I found that the 5 volt Red Wire is pushing 17.44 volts. I am afraid of connectiing the.controller to the throttle because I do not want to damage the throttle. Is this high voltage normal or is it a defect? Will it destroy my throttle?
What if my key ignition only has red and black wires?
Very nice video thanks for controller wairng diagram full details thanks 👍 sr ❤❤❤
I'm glad that the video helps.
Thank you for watching.!
Ride safe!
Which brand e10 scooter is better ROHAN WINGS or WINNER SKY??
Goodday!
These are all same performannce.
I recommend you take at least 52v electric scooter.
Ride safe always🤟
@@jaysonulanday ok brother thank u so much
I tried to install one, and now my e-scooter just beeps and displays e0. The brake light doesn’t come on either, but works with just power to it. The headlight can still be turned on though it’s beeping but no power to the motor. What do I do to fix it?I have a controller with no wires, only pins, in case it helps
tanong lang po yung 500wats na controler pwdi ba syang palitan na controller 1000wats hindi kaya masisira yung hube motor na 500wats lang salmat sa sgot
Pede nmn kaadik kaya lng iinit un hub motor kase beyond na sa limit niya un wattage na ibibigay nun 1000w na controller.
Aandar ng mas mabilis un hub motor pero magiinit din.
hindi namn sya masisira cgoro. normal lang yung init.
salamat sa replay idol
@@nidaesteda1042 Di nmn basta basta masisira un motor, basta wag ka lng magbabad ng matagal na naka throttle.
kung baga pasundot sundot lang.
Pero iinit pa rin.
ride safe lage kaadik!
@@nidaesteda1042
Maraming salamat din sa suporta kaadik!
this man is speeking chines cant under stand
pls iscooter ix3 pls 😢
👍👍👍👍👍