How to avoid BRICKING your Miyoo Mini | Firmware Upgrades | Onion OS troubleshooting

แชร์
ฝัง
  • เผยแพร่เมื่อ 16 ธ.ค. 2024

ความคิดเห็น • 80

  • @angelomattei2304
    @angelomattei2304 2 ปีที่แล้ว +39

    Do not let water touch it, and never ever give it food after midnight

    • @RetroBreezeYT
      @RetroBreezeYT  2 ปีที่แล้ว +2

      Its so simple!

    • @adamkane7513
      @adamkane7513 ปีที่แล้ว +1

      Unlike Gizmo, the other Gremlins he "birthed" were bad from the start.

  • @sambagogo777
    @sambagogo777 2 ปีที่แล้ว +4

    The no-brand 64GB microSD card that came with my MMv2 still works fine after having installed and updated Onion OS numerous times.

  • @mokajoka9183
    @mokajoka9183 2 ปีที่แล้ว +7

    I think I can say thank you on behalf of everyone for what you do for the Miyoo community
    Keep it up mate!
    If you allow me, I would like to add to what was said at the end of the video.
    The same thing happened to me with the SD card, because the basic SD card reader that I got for the Miyoo is just as crappy as the factory SD card lol.
    So all my data was lost while copying the ROMs..
    I would rather recommend a better one!

  • @juanidiaz2917
    @juanidiaz2917 ปีที่แล้ว +2

    Excuse me . I need Help. my miyoo gets stuck in the boot logo that's says miyoo. I bough another external micro sd, y tried removing the battery, everything!! how can I fix it?
    I've waited too long for the device for it to break.

  • @RedneckIrishman
    @RedneckIrishman 2 ปีที่แล้ว +2

    Shem, people always tend to blame others for their own inadequacies. I really hope people don't blame you for arsing-up THEIR installations.
    I have had my mini for about 5 months or so and every single tutorial vid you have put out has been extremely well informed, presented and easy to follow; especially the ports collections.
    Thanks for the great content and keep up the good work!

  • @Artemas_16
    @Artemas_16 2 ปีที่แล้ว +2

    It nice to know these things just in case.

  • @mammelsauce5345
    @mammelsauce5345 10 หลายเดือนก่อน +1

    My miyoo mini plus gets stuck on a game, it won’t let me use the power, menu, or volume buttons but still runs the game, I have to back out thru retro arch, but then no other games will load after that, when I restart I can start a game, gets stuck again, rinse repeat

  • @bryan.t777
    @bryan.t777 2 ปีที่แล้ว +1

    I have a v1 mini that will power on, but will not diplay anything on the screen at all, with or without the sd inserted. I have a known good sd card that I use for flashing firmware on the mini. I always pull the battery and plug in the device when updating the firmware. I've tried upgrading firmware, downgrading firmware to every version avaiable. nothing happens. I thoughtt maybe the ribbon cable to the screen was either not connected or damaged, that isn't the case as I changed out system boards and it displays just fine. The only thing I can think of is the video chip has gone back on the system board.

  • @the_emmo
    @the_emmo ปีที่แล้ว +2

    I just hard bricked my Miyoo Mini trying to install Onion OS 4.0.3. Looking at this video I think my mistake was using the included microSD card to do the installation. I wonder if using a different more reliable card would have worked. I know it's hard bricked because it won't turn on with or without the SD card, the green LED just lights up while I'm pressing down the power button, and my Mini won't boot either way. I'm still not sure how to repair it, tho.

    • @dwellerinblack7816
      @dwellerinblack7816 ปีที่แล้ว

      I was about to make this exact mistake, so I'm glad I can learn from others.

    • @1michelemichele1
      @1michelemichele1 ปีที่แล้ว

      Hey, just wondering if you could fix it

  • @actionfunkimba
    @actionfunkimba 2 ปีที่แล้ว +2

    Thanks for the video!
    I'm curious if you could tell us what games you are testing throughout the video because you seem to test games that I'm not familiar with or recognize. If not, no big deal. Thanks again

    • @RetroBreezeYT
      @RetroBreezeYT  2 ปีที่แล้ว

      Hey yes absolutely:
      Empire of Steel / Steel Empire (MegaDrive)
      Strider 2 (PSX)
      Viewpoint (NeoGeo)
      I'm currently working on channel graphics and hope to include the game names in the videos in future.

    • @actionfunkimba
      @actionfunkimba 2 ปีที่แล้ว

      @@RetroBreezeYT great! Thanks!

  • @yoyoguyver
    @yoyoguyver 2 ปีที่แล้ว +1

    I thought my memory card was messed up but it was just the hidden files I forgot to look for.
    Thank you so much!!!!!

    • @nithintharakan6902
      @nithintharakan6902 10 หลายเดือนก่อน

      How did you find those hidden files

    • @yoyoguyver
      @yoyoguyver 10 หลายเดือนก่อน

      ​@nithintharakan6902 I put the memory card into my computer and on the file manager clicked on the show hidden files option. I don't remember the location of the hidden files that were causing the issue as it was some time ago and have sold my miyoo mini so I can't even check now.

  • @monkeytrident
    @monkeytrident ปีที่แล้ว

    @RetroBreeze I am getting my Miyoo Mini Plus tomorrow, how did you get that cool bios bios splash screen 2:08 ?

    • @RetroBreezeYT
      @RetroBreezeYT  ปีที่แล้ว +1

      Using LogoTweak: github.com/schmurtzm/Miyoo-Mini-easy-logotweak

    • @monkeytrident
      @monkeytrident ปีที่แล้ว

      @@RetroBreezeYT Thank you, my Miyoo Mini just arrived today with 64 micro sd, I ordered a 256gb micro sd it will arrive in a few days, so I will pimp it up starting with Onion OS.

    • @monkeytrident
      @monkeytrident ปีที่แล้ว

      @@RetroBreezeYT Many thanks I was able to change the boot splash screen, now I just got to get the Web File Browser installed and working on my Miyoo Mini Plus :(

  • @tantanwing6279
    @tantanwing6279 6 หลายเดือนก่อน +1

    is my device bricked? i installed onion os in the default sd card. then after the installation screen it crashed. then when i turn it on it just shows the miyoo mini title screen then shuts off afterwards. can you help me please?

    • @RetroBreezeYT
      @RetroBreezeYT  6 หลายเดือนก่อน

      Sure, does it boot up to stock OS without the SD card inserted?

  • @Wooperplus
    @Wooperplus 3 หลายเดือนก่อน

    I pressed the middle button while at the main menu and it now it won't shut off no matter how long I hold the power button.

  • @MaciejLelito
    @MaciejLelito 8 หลายเดือนก่อน

    So after firmware upgrade, it was black screen (no charging). I removed sd card, turned off, turned on and the screen is still all black.

  • @douglassmith6288
    @douglassmith6288 ปีที่แล้ว

    can you please help me out? my ps1 games that are in pbp format and show their scrape art even will not load up and play on my miyoo mini plus. any idea why? other games still work but the newer ones that i just started adding today and still show the scraped art will not work.

  • @Charonco
    @Charonco 10 หลายเดือนก่อน

    My works kind fun i will say but i notice that not all games work some of them have these green stripes still playable but those green stripes are annoying i dont know if the files are corrupted or something some games can even be load they get stuck in the loading screen specially ps1 games

  • @wolflord8117
    @wolflord8117 2 หลายเดือนก่อน

    I know this is far to late to ask. How does the screen turn black when you boot up the mini?

  • @garethbeaton8414
    @garethbeaton8414 ปีที่แล้ว

    With onion os all ready on it SD card can I swop back to a french one with same bits on it to fix it games only cume up in retroarch

  • @CocogalaxyCat
    @CocogalaxyCat ปีที่แล้ว

    I have onion installed. The game screens load but unplayable. Tried another sd card, still not playable after game loads.

  • @andrewring378
    @andrewring378 11 หลายเดือนก่อน

    Also this sounds obvious but always make sure you've read all of the steps and re-read them, I've made mistakes by just overlooking something that is easily fixed.

  • @mangasprai
    @mangasprai ปีที่แล้ว

    I did nothing and once the miyoo mini froze on startup. Since then it just shows the led lights but the screen stays black when i fire it up. The sd works fine on another miyoo

    • @Indyxx87
      @Indyxx87 ปีที่แล้ว

      I have the same issue. don't know what to do, firmware update did not help

  • @thebdknight
    @thebdknight 7 หลายเดือนก่อน +1

    What is the game at 10:19?

    • @RetroBreezeYT
      @RetroBreezeYT  7 หลายเดือนก่อน +1

      That would be Viewpoint on NeoGeo!

  • @jacobalonzo1776
    @jacobalonzo1776 ปีที่แล้ว

    I think i may have bricked my united it turns on but doesn't go past the Linux screen. i tried to update the software to the newer version of the os so i could install onion but it wont go past the screen power on screen. is there some way i could fix it.

    • @RetroBreezeYT
      @RetroBreezeYT  ปีที่แล้ว

      Does it boot up without the SD card inserted?

  • @garethbeaton8414
    @garethbeaton8414 ปีที่แล้ว

    My games disappeared from home screen but can play in retroarch but cart do lists

  • @leonardolicho
    @leonardolicho ปีที่แล้ว

    Hello @retrobreeze I have an issue with the red borders or frames. The low battery hint. Thing is that even when I charge the mini v2 the borders wont go away. Is there any fix for that?

    • @RetroBreezeYT
      @RetroBreezeYT  ปีที่แล้ว

      Are you using Onion OS? Which version (shown on boot screen)

  • @krad1314
    @krad1314 2 ปีที่แล้ว

    I didnt brick my Miyoo but after updated to 4.3 on my miyoo mini v2 it stopped playing any of my gb and gba games

  • @elp6197
    @elp6197 ปีที่แล้ว

    Hi! I jus got my miyoo in an already bricked state. So I cannot say what process happened to get it this way. But I have done my research.
    When I turn it on, I get a blue and green light on top, the black light powers on, but does not display anything. I hear the speaker trying to make some kind of sound. So I tried to install a fresh version of Onion OS. To no avail, same story.
    I ended up following websites to miyoos website and found a link for the black screen repair. You upload it as the only file on the SD card, take battery out of miyoo, enter SD card, and plug into low voltage outlet. Let it sit at least 20 min, disconnect power. And try to boot with SD card out, no battery, only power cord to see if you get a charging display at least. I get nothing.

    • @RetroBreezeYT
      @RetroBreezeYT  ปีที่แล้ว

      Have you tried reseating the display cable? It may be loose.

    • @elp6197
      @elp6197 ปีที่แล้ว

      @@RetroBreezeYT thank you so much for replying! Will check asap and come back with a response.

  • @dosanjos2121
    @dosanjos2121 ปีที่แล้ว +1

    Great video! What was that game that you were playing at 6:45??

  • @troymosson8975
    @troymosson8975 2 ปีที่แล้ว +1

    Great informative video. I plan to install OnionOS v. 4.0.3 once I get some time to do so. I would like to know the games you were playing on your Miyoo Mini during this video. Those games looked interesting.

    • @RetroBreezeYT
      @RetroBreezeYT  2 ปีที่แล้ว

      If I recall, it was Empire of Steel/Steel Empire (MegaDrive), Strider 2 (PSX) and Viewpoint (Neo Geo). Thanks for watching!

  • @Renegadetothe64th
    @Renegadetothe64th 10 หลายเดือนก่อน

    I need help really bad. I installed minui and bought a 32 gb sandisk micro sd card for it. I downloaded 4 Pokémon rom hacks that were pretty legit. All being linked from the creators of the rom hacks. That being Prism, anniversary Crystal, Crystal Legacy, and Polished Crystal. Now all my roms just white screen when I play them. I tried playing the stock sd card that came with the system and that works fine, even though the quality is significantly lower than my sandisk card. Anyone know how I can fix the white screen issue?
    Also my device does seem to boot properly without an Sd card. It goes to the stock operating system though which is Retro Arch. And my sd card is FAT32.

  • @charlesmontalvo3866
    @charlesmontalvo3866 ปีที่แล้ว

    Bro help!!!! LOL....Stock OS loads but screen is lit black. I see the miyoo boot logo for a couple seconds then it goes to a black lit screen. I've tried reinstalling. After a few tries i was able to boot up the stock OS but once i attempt to install onion it goes back to black. I've also tried the "black screen firmware as well as installing latest and older versions of the stock OS. Currently using a 32gb sony SD. Any help is appreciated thanks!

    • @RetroBreezeYT
      @RetroBreezeYT  ปีที่แล้ว

      1. Does the device boot properly with no SD card inserted?
      2. Is your SD card definitely formatted to fat32?

    • @charlesmontalvo3866
      @charlesmontalvo3866 ปีที่แล้ว

      Hey, device boots onwithout an SD card. I can see the miyoo logo but after 1 second it goes to blank screen and i can hear the stock OS music playing. SD card is FAT32 @@RetroBreezeYT

  • @ndeyefatouthiam9864
    @ndeyefatouthiam9864 9 หลายเดือนก่อน

    Hi mine powers on but then only stays on for 30 sec

  • @TOFOGeorge
    @TOFOGeorge ปีที่แล้ว

    Don’t think anyone will answer but I just got mine out of the box went to turn it on and nothing, I plug it in using the cable and low volt plug and the green light goes on and turns on to charging screen but it can charge all day and the minute I try to turn it on without being plugged in it does not work don’t know what to do

    • @RetroBreezeYT
      @RetroBreezeYT  ปีที่แล้ว

      Have you tried powering it up without the SD card inserted? Does it boot up like that?

  • @nener42
    @nener42 ปีที่แล้ว

    Hello, I don't seem to find logo tweak in Onion 4.0.4, has it been moved elsewhere?

    • @nener42
      @nener42 ปีที่แล้ว

      my bad I haven't reinstalled it after a reinstall of onion...

  • @s.williamc.
    @s.williamc. 10 หลายเดือนก่อน

    I got it from amazon and within 2 hours it hard bricked. I did nothing, I hit reset from a menu because I couldn’t get out of an emulator and it bricked.

    • @RetroBreezeYT
      @RetroBreezeYT  10 หลายเดือนก่อน

      What happens if you turn it on without an SD?

  • @pedrosilva7013
    @pedrosilva7013 10 หลายเดือนก่อน

    My Miyoo Mini+ is soft bricked, the Onion OS installation goes to 100% on the first part, but them when rebooting, it get stuck in the Miyoo boot screen forever (I mean, I wait for, at least, 2 ou 3 HOURS and nothing happens)

    • @Austinredstoner
      @Austinredstoner 10 หลายเดือนก่อน

      Did you format it to Fat32?

  • @garethbeaton8414
    @garethbeaton8414 ปีที่แล้ว

    Day 2 of haveing it all runs but cart load a game at all any help

  • @raulvazquez9220
    @raulvazquez9220 2 ปีที่แล้ว +2

    I am trying to get a Miyoo mini sooo bad !!!! I can’t find them anywhere

    • @spartaninvirginia
      @spartaninvirginia 2 ปีที่แล้ว +2

      The Miyoo Mini subreddit basically posts in stock notifications whenever a reputable store restocks.

    • @raulvazquez9220
      @raulvazquez9220 2 ปีที่แล้ว

      @@allengaleana yea I keep refreshing their page haha

  • @ShadesGameSource
    @ShadesGameSource 2 หลายเดือนก่อน

    Subbed when I discovered it wouldn't brick my device!

  • @SchmurtzAlex
    @SchmurtzAlex 2 ปีที่แล้ว +4

    Miyoo Mini is really hard to brick, even if you corrupt the nand there’s a rescue procedure which has been tested successfully (no need to open the console).
    There’s also a way to reflash it with uart and a raspberry but less easier 😅
    I’ll put a link for this rescue procedure.
    And you’re right , Onion is not a cfw, the miyoo mini is build to run a script on the sd card at the very beginning of the boot : in reality this behavior is dedicated to firmware update but we have diverted this function 😄

    • @the_emmo
      @the_emmo ปีที่แล้ว

      Hi, would you mind sharing this procedure please? My Mini is hard bricked and I'm not sure how to bring it back to life.

    • @SchmurtzAlex
      @SchmurtzAlex ปีที่แล้ว

      ​ @RetroBreezeYT Hello, the latest Miyoo Mini are delivered with a new firmware. Please check your version before installing Onion :
      - 20221216 which seems to have problems with some bricks with Onion
      - 20221224 seems to be OK with Onion.
      We are currently looking for images of these firmwares to investigate on it.

  • @Zombiechlen
    @Zombiechlen ปีที่แล้ว

    10:19 game - Viewpoint (sega)

  • @Hollowedfigure
    @Hollowedfigure ปีที่แล้ว

    Mine flashes the miyoo screen then turns off

    • @RetroBreezeYT
      @RetroBreezeYT  ปีที่แล้ว

      Even without an SD card inserted?

    • @Evos_87
      @Evos_87 ปีที่แล้ว

      ​@@RetroBreezeYTexactly my problem. It just stuck on miyoo screen forever, with or without SD card. And i wasnt updating it or anything, i actually took it on holiday and it just brick itself there

  • @EnderCrypt
    @EnderCrypt ปีที่แล้ว +1

    everythings a soft brick if you are brave enough

    • @RetroBreezeYT
      @RetroBreezeYT  ปีที่แล้ว

      Having replaced my first smd inductor a couple of months ago, I agree!

    • @CakeV4
      @CakeV4 11 หลายเดือนก่อน

      ​@@RetroBreezeYT I used the adapter with the SD card that came with the miyoo, installed a bunch of games and then I broke it 😭😭😭

    • @CakeV4
      @CakeV4 11 หลายเดือนก่อน

      But only after installing 3 games and then tried installing more