Making a monotrack bike
ฝัง
- เผยแพร่เมื่อ 21 ก.ย. 2024
- To make this monotrack bike, we took a car tyre, from which we removed its two sides to make it softer and easier to take the shape that we want.
► Our Tools & Plans: koji.to/makeit...
► Our Website: www.makeitextr...
► Tools we recommend:
Engineers Squares Set: amzn.to/3IgWU4G
25FT Tape Measure: amzn.to/3hcUBDH
Mitutoyo 500-197-30: amzn.to/3sZwXQB
Marking Tool: amzn.to/3Ig0SdX
Welding Magnets: amzn.to/3JRATJU
Digital Angle Gauge: amzn.to/3h9MojF
Heavy Duty C Clamp: amzn.to/3BZ2uGJ
Center Punch Set: amzn.to/3hcWDnj
Jobber Drill Set: amzn.to/3HgsYo3
Multicolor L-Key Set: amzn.to/3t2Xxsb
Countersink bits: amzn.to/3sci2mT
Magnetic Drilling Cutter Kit: amzn.to/3HdsKy0
Camera Nikon D7500: amzn.to/3sot7l0
Useful Tools we recommend: amzn.to/3Ii2ljF
Lathe/Milling Parts: amzn.to/33JjDqX
Makita Tools: amzn.to/3t0eOSR
Videography: amzn.to/3H8jaMM
Our PC: amzn.to/3Hexljo
► Check our Storefront:
www.amazon.com...
-----------------------------------------------------------------------------
Subscribe: bit.ly/MakeitEx...
Main Channel: bit.ly/MakeitEx...
Facebook: bit.ly/Makeitex...
Instagram: bit.ly/makeitex...
TikTok: / makeitextremeshorts
16:47 ♫ Music:
Mat Mor Raw - No Toxic Sensation
/ no-toxic-sensation
Creative Commons - Attribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0)
creativecommon...
#makeitextreme #makeitextremeshorts
I dub thee the ball ripper. Weld a plate over that section bro
First thing I thought was that dudes got balls...for now.
Best comment I’ve seen in awhile man
I was thinking the same exact thing some poor miserable fuck out there is going to get their genitalia ripped off by this thing😅😮
The tire is rotating the other way.
@@ShortArmOfGodyo so if his balls are ripped one way it’s fine but the other way it isn’t ? 😂
it may not be practical, but it looks cool and I admire the craftmanship
It may not be fast, but it looks cool and I admire the craftsmanship
There were not very many... corners...
In the demo ride 😎
Exactly what I was thinking lol
Yeah, what if there's dogpoop!?
@@DropDieter 💩😖🤮
@@DropDieter Waffle Stomper 5000!
these are bog bikes used in russia. you just paddle along with your feet.
With that wide track I wonder how it does in sand, or even snow. Thank you for sharing with us.
A well done very complicated multi skill much machined project. The lathe tool work, the welding the pull it together design is incredible. You got me with cutting a tire to make a tread. Insightful upscale engineering. Subscription this AM. Greetings from USA
This is one of those things that is simultaneously hilarious and also extremely freaking cool. It reminds me of the tank motorcycle you can get in Mercenaries 2.
That vehicle was my favorite thing in that game
if this were a Colin Furze build this would be a 6 part series of videos 10 minutes each.
Without a doubt. The coolest thing I have ever seen on youtube. I want one. Now.
A bit of padding on the seat maybe? 😂 👍
Can't accelerate!
Can't stop!
Pure Genius!! 😂
also can't turn :D
Great video, fantastic engineering, flawless execution and a risky ride. What’s not to like. 👍😋
He might want to add a cover.
Огород культироват пойдёт
Holy moses, the age old question comes up once again, all the incredibly extensive trouble and for what? Looks like a Big Wheel gone wrong 😂
See those hands? - THAT'S what MOTIVATION looks like. - NJ, great build. Ty for the content.
looks like a snowmobile without the front half
how is the steering? :o
would definitely add rubber grips and a crotch guard over the spinning tire
One of the best build video's I've ever watched, bravo, and what a fun little toy~!~
i agree
A track bike to ride in a straight line on pavement... what a brilliant idea! 🤷🏻♂️
Практического смысла конечно никакого нет, но как демонстрация инженерной мысли и умения работы с металлом, весьма красиво.
this guy is on the next level,i dont even know what to say or think.
Superb build as always guys. Wonderful!
Cool concept, but i am concerned. What happens when you blow the "track"? And what happens if you fall onto the track thats wide open infront of you? A few saftey features could be added for me to ride it, feels like its a death trap
Boo yaa, excelent. Bigger, faster, up a mud hill sideways. Give this man everything he needs yesterday.
I'm impressed, nice use of a moped, the evolution of the ultimate pit bike.
until you have to turn
Awesome fabrication skills as well as engineering. I only have one question. How do you make a tight turn?
With its all-terrain abilities, I quess its no need for any turns
You gun it, using a planted leg as pivot point....I imagine.
@JimDog794 You don't 😂👍
The most inconvenient tire change ever 😂
كيف يكون الانعطاف يمين ويسار ؟
جهد جبار ومشكور على مشاركتنا الفيديوا الجميل ❤
Genuine craftsmanship!
Good Sir you just made the world's largest belt sander that you can ride home!😂
Playing fast and loose with the family jewels bro
Great build wish the wheelbase was double the size you've now. Bigger tyre wider overall length of the bike.
Damn bro this video: good filming, no pointless talking, insane welds overall top notch vid :D
Dude! Your welding is Superb!!!
Wild build, congratulations - I'd be wearing kevlar jeans though, that tire could rip open an artery and you'd bleed out in a few minutes.
Great imagination and greater skills.
This would be working great at Burning Man right about now!
Excellent dude!
This needs a Honda Helix 250cc or even a Burgman 650cc. Great build though!
Nice to watch, obvious fun to ride, now lets see you do a slalom on it.
Самое интересное не показали, как он поворачивает ? Как входит в повороты ?
Никак
Extremely cool build! How does it.turn?
It doesn’t. It’s crap.
Nobody knows, we all keep asking 😂
No worries about wheelie tickets! 😂
The "Say Goodbye To Your Thighs 9000". I love it! Just imagine if it was electric.🤯
A nice concept. Looks like fun.
It would be all fun and games... until you end up in the hospital after it rips your twig and giggle berries off😂
Superbe réalisation, bravo !!!!!!!!!!!!!!!!!!!!!!
i dont have the equipment or the knowledge but my thought with these always was what if there were 2 parallel tracks each cambered a bit with some suspension. so there was some better lean. like a tank just over simplified and with tread. either jus suspension or you could have some kind of sensors so when youre leaning a lot on one side it slows down just very so slightly so you can turn better. idk im just spewing stuff.
i dig it either way. keep up the work 👍
khong co gi bang dam me tuyet voi
The unicycle da long way 😂
I think the camera was moving faster that the bike.
MAN YOU WHEELING ALL OVER THE PLACE LOL. I LIKE TO SEE YOU CLIMB A STEEP HILL AND MAKE A U-TURN AT THE TOP. I THINK YOU SHOULD REDESIGN IT WHERE IT STAY FLAT. MONOTRACK 2
How gloriously daft!
Awesome build. Superb results. Subscribed!! 🤘😎
That's crazy! 🤙
That's one cool awesome project
Definitely made that seat extreme!
Nice work Bro, yours Amezing
Looks fun, a bit sad it tilts back so much. You need a longer tire.
I gotcha!..great concept!..(we got the same "Fabrication Addiction".)..dude you got quite the "engineering mindset"..(and an AWESOME Machine Shop!..i especially dig the auto rotating Tig Welding Turret!...nice job brother!!
It's amazing how slow it is.
amazing job bro!!!!!
А как разворачиваться?
Как подшипники в роликах менять,болгаркой спиливать?
How many times did it rip your shorts off?
"Ball ripper" is the perfect name. Looks stupid dangerous.
Maybe "da castrate cycle". Or for the Chinese market "Dong long gone 3000"
This would make a great “rear wheel” for a bigger bike.
I don't know if that's a bike but it's awesome
Incredible build
Damn nice beads that you got there
Well done! The brain! The capabilities! Make me seem very simple !😢😅❤
Great build 👏
You should make em to sell - I'd av 1 !
Excelente trabajo.
SaludoS
Impresionante video ... que nos muestra la elaboracion y pulicion de diferentes objetos .
Build one out of a big diesel Tire with a stronger engine. 👌
Now this man has talent 😊
must be the bumpiest, hardest on the ass you can imagine ride... run over just a lugnut and you're definitely feeling it in the tailbone!
neat idea
No more family jewels 😂🎉
Would you be able to make a larger Monobike if you used a large base tire ?????
сразу видно что руки из правильного места растут. круто👍
Конструкция сыровата немного
А как он поворачивает?
@@vovavova5278 наверное наклоном тела , но я сомневаюсь
@@СергейУдовенко-г9ц как-то так, но заметно что затрудняется, и явон газ выжать не может, аппарат назад заваливается...конструкцию гусянки нужно менять и ролики снизу бочкаобразные
That was dope!
Should make more insurance to cover the upper tire to reduce the danger
Beyond Thunder-dome! Very (very) COoL. Would have loved to see it acutally TURN? I'm guessing it's just a weight bias maneuver. But still. I think you left some of us wondering. Thank you for the video. You RoCk
Mad skills, master level.
‘Yeah, this is my daily driver.’
Here’s a quick question for the builder.
It looks like you built this with an All Season Tire that sits on a 16”-18” rim. If you were to utilize a bigger tire 🛞, like a 22.5” truck tire, or a tire for a 24” rim, would the power plant become bigger as well?
Yes, rotational inertia increases exponentially as you increase radius, + the extra weight, could gear it to go slower tho
Other wise pretty slick and creative.
The title said "making a monotrack bike"
The thumbnail said "creating a Lovecraftian abomination"
That's a compliment, ya doof.
The high speed belt near one's giggly bits is a good bit sketchy however it looks fun
How do you turn? There was no video of them turning.. it’s awesome, but it needs some upgrades
How do you free hand that good. Amazing
Gorgeous...they paint a lot of EUC's orange too.I wonder, Is orange paint the cheapest or something?
Надо защитный кожух ставить ! Чище и безопасней.
As a machinist, I'm very bothered by the use of a center punch and hand drill to make the 4 hub mounting holes. If you've got a lathe, welder, etc. then surely you have a Bridgeport too? Or even a good drill press? But hey, not my build, and it clearly works, so props to you!
I noticed that as well....
Can you imagine the looks you'll get at Sturgis if you rock up with this?😂
Very cool 🎉 awesome job 🎉
Straight roads only!!
Awesome but Im guessing you only had to burn your ankle once to know it needs a slight redesign
Awesome bro 😎❤❤❤
You did screw threads on a lathe? I didn't know you could do that. how do you make sure to make the same consistent thread on different passes?
Wait, didn't you post this exact video 2 years ago? Besides that, I absolutely love the build, and it's amazing intricate detail. Amazing engineering!
Edit: Checking back, ya this is just an exact cut and paste copy of a video from 2 years ago just reuploaded.